Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Series 7

Straight running belts l Pitch 40 mm (1.57 in)
Belts for heavy-duty non-food applications


Series 7 – Excerpt from Prolink Engineering Manual

Design characteristics

  • Closed-hinge design provides high belt pull capacity
  • Small-pitch relative to belt thickness makes belt suitable for compact, heavily loaded conveyors
  • Robust design with large surface contact area ensures superior wear life
  • Closed solid edge
  • Flame retardant version available (PXX-HC – in line with DIN EN 13501-1)

Series 7 - Design Characteristics

Basic data

Pitch 40 mm (1.57 in)
Belt width min.40 mm (1.57 in) 360 mm (14.2 in) for belts with FRT-surface (side modules only available without FRT-surface)
Width increments 20 mm (0.8 in) FRT-surface on request
Hinge pinsMade of plastic (PBT) or stainless steel

Prolink Series 7 Basic Data

S7-0 FLT | 0% Opening | Flat top

  • Closed, smooth surface
  • Flat top surface

S7-0 FLT

S7-0 SRS | 0% Opening | Slip-resistant

  • Closed surface
  • Slip-resistant surface, pleasant to walk and kneel on
  • Flat top surface

S7-0 SRS

S7-6 FLT| 6% Opening | Flat top

  • Open area (6 %) increases drainage capacity
  • Smooth surface

S7-6 FLT

S7-0 NSK | 0% Opening | Non skid

  • Closed surface
  • Non-skid surface for safety when walking on belt

S7-0 NSK

S7-6 NSK | 6 % Opening | Non skid

  • Open area (6 %)
  • Non-skid surface with drainage holes for safety when walking on wet belts

S7-6 NSK

S7-0 FRT1 | 0 % Opening | Friction top (Design 1)

  • Closed surface
  • Friction top version with replaceable rubber pads provides increased grip

S7-0 FRT1

Sprockets

in different sizes with round or square sprocket bore

Series 7 - Sprockets

Wheelstopper

used for securing the position of vehicles on the belt

Series 7 - Wheelstopper

Pin Retained Rollers

For applications where low back pressure accumulation or product separation is required

S7_PRR

Prolink Series 7 - Video

Further Information

  • 888 Series 7 EN – Excerpt from Prolink engineering manual

    Series 7
    Excerpt from Prolink Engineering Manual