Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Series 11

Tight radius belt for light-duty food and non-food applications

Series

1022 S11-45-GRT

S11-45 GRT

Open (45%), lattice-shaped surface with replaceable caps

Product Range

MaterialsPPPOM-CRPA
ColoursWT/BLWT/BLBL
Open area [%]454545
Allowable belt pull [N/mm (lb/ft)]9 (617)15 (1028)15 (1028)
Allowable belt pull [N (lb)] (Curves)600 (135)1000 (225)1000 (225)
Weight [kg/m2 (lb/ft2)]4.7 (1.0)6.7 (1.4)5.7 (1.2)



*Also available with integrated friction pads for better grip (minimum indent 82 mm (3.2 in))

WT = White
BL = Blue

1017 S11-45-GRT-HD

S11-45 GRT HD

Open (45%), lattice-shaped surface with replaceable Hold Down caps

Product Range

MaterialsPEPOM-CRPA
ColoursWT/BLWT/BLBL
Open area [%]454545
Allowable belt pull [N/mm (lb/ft)]9 (617)15 (1028)15 (1028)
Alowwable belt pull [N (lb)] (Curves)600 (135)1000 (225)1000 (225)
Weight [kg/m2 (lb/ft2)]4.7 (1.0)6.7 (1.4)5.7 (1.2)



*Also available with integrated friction pads for better grip (minimum indent 82 mm (3.2 in))

WT = White
BL = Blue

Combo Belts Teaser EN

Further Information

  • Ref.no.888-2_1.2_S11.pdf

    Series 11
    Excerpt from Prolink Engineering Manual

  • 201 S11 Guidelines EN

    Series 11 - Guidelines
    Ref. No. 201 | Issue 05/15

General Properties

General Properties Series 11

Pitch
25 mm (1")

Belt width min.
175 mm (6,9")

Width increments
In increments of 25 mm (1")

Hinge pins
5 mm (0.2") made of PBT.
Alternative pin material on request

Download the picture in high resolution.

Minimum inside curve radius = 1.4 x belt width.
Minimum length of the straight in-feed/
out-feed section before and after the
curve = 2 x belt width.

  • In the last curve before the drive the blue belt edge must be on the outside
  • In the last curve the white belt edge must be on the inside

series 11

Accessories

Accessories for Series 11

Profiles
25, 50 mm (1.2") height

Series 11 General Properties

Caps
Robust, replaceable caps on the belt edges

Series 11 Accessories Caps

Hold Down Caps
Hard-wearing, replaceable hold down caps on the belt edges to guide the belt underneath the area where products are conveyed

Series 11 Accessories Hold Down Caps

Friction Pads
Integrated friction pads for better grip (minimum indent 82 mm (3.2 in))

Series 11 Accessories Friction Pads

Sprockets

Sprocket size2530400.7511.251.5bD0ADi
[No. of Teeth][mm][mm][mm]["]["]["]["][mm] ["][mm] ["][mm] ["][mm] ["]
6RD 25 (1.0)50 (2.0)19 (0.7)32 (1.3)
9RD / SQRD / SQRD / SQRD / SQ 25 (1.0)73 (2.9)30 (1.2)56 (2.2)
11RDRDSQRDRD SQ25 (1.0)88 (3.5)38 (1.5)72 (2.8)
12RD / SQRDRD / SQRD / SQRDRD / SQ25 (1.0)96 (3.8)42 (1.7)80 (3.1)
16RDRDRD / SQRDRDRD / SQ25 (1.0)127 (5.0)57 (2.2)112 (4.4)
18RDRDRD / SQRDRDRD / SQ25 (1.0)143 (5.6)65 (2.6)128 (5.0)
20RDRDRD / SQRDRDRD / SQ25 (1.0)159 (6.2)73 (2.9)144 (5.7)

Series 11 Idlers
Series 11 Sprockets

RD = Sprocket bore round
SQ = Sprocket bore square
b = Width
D0 = Pitch circle diameter

Di = Idler outer diameter
A = Distance centre of sprocket bore/top edge support
DR = Double-row sprocket

Sprocket and idler layout

Ideal transmission of force due to sprockets offset inwards

Series 11 Sprockets EN