Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

SERIES 10

Straight running belts l Pitch 25.4 mm (1 in)
Belts for light to medium-duty hygiene-critical applications


Series 10 – Excerpt from Prolink Engineering Manual

Design characteristics

  • Small number of eyelets ensures easy cleaning
  • Hinges that open wide, combined with smooth, flat channels on the underside and a continuous drive bar produce an easy-to-clean design
  • Robust design guarantees superior durability
  • Optimal design of sprocket teeth and tracking fins provides superior sprocket engagement, safe belt tracking and an easy-to-clean sprocket

Serie10_Draufsicht.jpg

Basic data

Pitch 25.4 mm (1 in)
Belt width min.38.1 mm (1.5 in)
Width increments19.05 mm (0.75 in)
Hinge pins5 mm (0.2 in) made of plastic (PE, PP, PBT)

Prolink Basic Data Series 10

S10-0 FLT | 0 % Opening | Flat top

  • Closed, smooth surface
  • Flat top surface

0561H_PL_S10-0-FLT.jpg

S10-0 NTP | 0 % Opening | Nub top (round studs)

  • Closed surface with round studs 5 % contact area
  • Version available without round studs at the side (38 mm indent)

0565H_PL_S10-0-NTP.jpg

S10-22 FLT | 22 % Opening | Flat top

  • Open area (22 %) for excellent air circulation and drainage
  • Smooth surface 55 % contact area (Largest opening: 2.6 x 5.3 mm/0.10 x 0.21 in)

0562H_PL_S10-22-FLT.jpg

S10-36 FLT | 36 % Opening | Flat top

  • Open area (36 %) for excellent air circulation and drainage
  • Smooth surface 26 % contact area (Largest opening: 5.8 x 13.4mm / 0.23 x 0.53in)

0566H_PL_S10-36-FLT.jpg

S10-36 LRB | 36 % Opening | Lateral rib

  • Open area (36 %) for excellent air circulation and drainage
  • Lateral ribbing 5 % contact area* (Largest opening: 5.8 x 13.4 mm/ 0.23 x 0.53 in)
  • open area lateral rib version for small inclines and gentle conveying of delicate products

0567H_PL_S10-36-LRB.jpg

Sprockets

In different sizes with round or square sprocket bore

S10_sprockets

Profiles

In different heights and designs for inclines

S10_profiles

Side guards

In different heights for retention of bulk products

S10_side_guards

Hold Down tabs

Hold Down tabs for additional guiding

S10_hold_down_tabs

Further Information

  • Ref.no.888-2_1.2_S10.pdf

    Series 10
    Excerpt from Prolink Engineering Manual

google-site-verification: google6bc5bacb351e9327.html