Nuway offers a wide range of rigid single and double sided made-to-order mats which provide an outstanding first line of defence against soil and moisture entering a building on the soles of shoes and the treads of wheeled traffic.
No entrance area is too big, too small or too awkwardly shaped for a Nuway matting system. No level of traffic or soiling is too high. Whatever type of rigid engineered system you have in mind, Nuway's experienced sales and technical teams can guide you to a solution tailored perfectly to your needs.
.jpg "New Picture (11).jpg")
When planning your entrance system it is useful to consider the entrance area in terms of zones. You can then select the different types of matting required to achieve an entrance flooring system that is fully integrated into your design scheme:
External primary matting
Outside the building entrance, primary matting is the first line of defence against footborne soil, scraping the coarsest dirt from the soles of shoes before they cross the threshold.
Internal primary matting
Immediately beyond the external matting, internal primary matting is required to remove footborne moisture and finer particles of soil.
Internal secondary matting
Flooring leading away from the entrance area – in the reception, corridors etc. –must be specifically designed to withstand heavy traffic and intensive cleaning regimes. They will be prone to residual soiling and will inevitably require a high level of cleaning to maintain performance and appearance.
We offer different types of entrance flooring; together they stop up to 94% of dirt being walked into your building:
- External rigid matting scrapes coarse dirt from shoes
- Interior primary matting with scraper yarns removes moisture and finer dirt particles
- Interior secondary matting removes the final traces of moisture to prevent slips
Reduce the need for cleaning
Together, these reduce the need for cleaning, saving you money and energy, and reducing your environmental impact.
In addition, our Nuway rigid entrance mats are reversible, so you can double their lifespan by simply turning them over.
Our Nuway range of rigid entrance systems contain recycled aluminium. We recycle all steel and aluminium waste and rubber waste is used in equestrian centres.
Forbo has a wide variety of promotional and technical documentation available for each of its products. The documents can be found by going to the product selection of your choice. You are then able to download the related documents. Download center
You can also immediately download the Nuway & Nuway Adhesive technical information here.
Nuway
Technical Data Sheet
MSDS
It is essential to remove dry soiling at least once a day. The most effective method is to use vacuum cleaners that incorporate a mechanically driven rotating brush or suction-only machines with a rotating brush attachment. As needed when periodic cleaning procedures no longer produce the desired result. Periodically, more thorough cleaning of the grills in place can be conducted if needed. Dry extraction or solution brush extraction may be used. Before beginning the extraction process, use a stiff brush to loosen and remove dry particles and fine soiling from the surface of the product and then use a vacuum to collect and remove loose soiling.
During the winter months, remove the foot grills and clean the frames and mat wells once per week. During other seasons, cleaning once per month should be sufficient. Each time the frames and pans are cleaned, make sure there is no residue or debris remaining under the grills. This will avoid warping of the foot grills because of an uneven substrate and prevent long term problems. Never use chemicals containing chlorinated hydrocarbons and bleaching/oxidizing agents on Nuway grills.
Nuway Floor Care Guidelines
See below for EPDs and HPDs of Flotex.
EPDs
EPD Coral Brush
EPD Coral Classic
EPD Coral Classic
EPD Coral Duo
EPD Coral Duo
EPD Coral Welcome
EPD Coral Welcome
Transparency Summary Coral Classic
Coral Brush Pure HPD
Coral Brush Pure HPD
Coral Duo HPD
Coral Duo HPD
