Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

flex 0.55 wood

Allura Flex 0.55 Wood offers high quality, dimensionally stable, heterogeneous vinyl tiles that have been specially designed for loose lay installation. The Wood designs have a natural look which is enhanced with the PUR Pearl finish which ensures an authentic matt surface that is also easy to maintain.

The inviting realistic Wood designs complement office, retail, leisure and hospitality spaces. Allura Flex 0.55 Wood planks are available in 3 plank sizes: 20x100, 20x120 and 28x150 cm.


Allura Flex 0.55 Wood

Technical Information

Technical Information

Forbo has a wide variety of promotional and technical documentation available for each of its products. The documents can be found by going to the product selection of your choice. You are then able to download the related documents. Download center

You can also immediately download the Allura Flex technical information here:

Allura Flex
Technical Data Sheet

US Commercial Warranty
CA Commercial Warranty (French)
CA Commercial Warranty


Floor Care

Allura Flex 0.55 Technical Specifications


Allura Flex 0.55 Installation

You can watch our installation instructions here

Download here the Allura Flex 0.55 installation guidance note

1) Before installation the sub floor must be dry, rigid and smooth. Leveling is required when this is not the case.
2) Ascertain the centre of the room by drawing 2 perpendicular lines on the floor.
3) Place the Flex tile or plank on the floor, on top of the tackifier. Please note that there are arrows on the back of Allura Flex tiles which identify the recommended installation direction.
4) When approaching the wall draw the required correct size of the tile or plank.

For a well finished floor
1. Make sure all sub floors are in satisfactory condition.
2. Install materials under proper site conditions.
3. Where applicable, use only Forbo approved adhesive.
4. If in any doubt or you require further advice please contact your local Forbo Flooring customer service department

Recommended adhesives
The recommended adhesive for Allura Flex 0.55 loose lay tiles is a tackifier - Forbo FRT950. Please contact your local Forbo Flooring customer service department for further information.

Allura Flex 0.55 installation


Allura Flex 0.55 leaflet


Sustainable vinyl tiles

European production
Allura Flex 0.55 loose lay LVT is produced in Europe, where our quality and environmental management systems are certified in accordance with ISO 9001 and 14001. All our Allura Flex 0.55 tiles are available from stock.

REACH compliant
Forbo Allura Flex is compliant with current and known future REACH legislation. The products’ emission complies with the highest regulation standards.

Committed to the Health of One
'Committed to the Health of One' introduces a focus in our commitment to sustainability that centers around all aspects that concern your health, wellbeing and comfort in relation to our products and services, today as well as for future generations.

Allura Flex 0.55 sustainable vinyl tiles

About Allura Flex 0.55

Loose lay LVT with unique design

Allura Flex 0.55 loose lay tiles and planks present a versatile solution in Luxury Vinyl Tiles. The collection offers high quality, dimensionally stable, heterogeneous vinyl tiles that have been specifically designed for loose lay installation using a tackifier.

The combination of a glass fleece carrier and well balanced multiple calendared layers provides strength, durability and longevity.

The design concept of Allura Flex 0.55 has been developed by our experienced international design team. Providing abstract, contemporary and more traditional wood and stone designs, Allura Flex 0.55 provides the scope to create attractive and unique interiors.

Our Allura Flex floors are easy to clean, helping to create hygienic environments and the striking, realistic designs can produce a sense of well-being, enhancing the quality of any commercial interior. The loose lay tiles are produced using phthalate free technology and are as convenient as they are beautiful.

Easy loose lay
Allura Flex 0.55 LVT is ideal for use in renovation projects, raised access floors or any project where speed of installation is required in permanent or temporary locations. As such the Allura Flex 0.55 loose lay tile collection is ideal for retail, hospitality, restaurants, hotels and multi unit housing.

Dimensionally stable construction
The specific construction of Allura Flex 0.55 offers durability throughout it's lifetime. The combination of a glass fleece carrier and multiple calandered layers makes it unprecedented in strength, performance and dimensional stability. Every part of the construction contributes to the final performance.

Durable protection
Allura Flex 0.55 vinyl tiles have a 0.55 mm transparent wear layer which, in combination with the unique PUR Pearl© finish, gives durable protection and high stain resistance. It reduces the need for water, detergent and energy in the cleaning process, which means easy maintenance and low cost. Quick and easy to install, simply using tackifier saves time, cost and in all cases delivers a perfect result.

Sustainable vinyl tiles
Allura Flex 0.55 also offers excellent sustainability credentials as it is REACH compliant, contains 22% recycled content and can be recycled at the end of life. Allura Flex is produced using phthalate free technology.

Allura Flex 0.55 durable vinyl tiles