In order to get a perfect floor it is important to prepare and to pay attention to a proper installation of the floor covering. Forbo offers an assortment of high quality installation products and tools, which helps you obtaining the desired result.
General Installation Guidelines
Substrate Evaluation & Preparation Guidelines
Adhesive Fast Facts
Adhesive Fast Facts (Spanish)
Installation
Adhesives
C 930
Acrylic polymer adhesive. Recommended for use with ESD controlled Colorex SD/EC Tile applications. Contains 0 VOC’s.
SDS
Technical Data Sheet
Technical Data Sheet (Spanish)
| Packaging: | 4 Gallon |
| Max MVE: | 8 lbs per 1,000 ft² |
| Max RH: | 85% |
| Max pH: | 10 |
| Adhesive Color: | White with Grey Conductive Fibers |
| Trowel Notch: | 1/16” x 1/16” x 1/16” Square Notch |
| Spread Rate: | 125 ft² per Gallon |
T 940
Acrylic polymer adhesive. Recommended for use with non-conductive Colorex SD/EC Tile applications. Contains 0 VOC’s.
SDS
Technical Data Sheet
Technical Data Sheet (Spanish)
| Packaging: | 1 Gallon or 4 Gallon |
| Max MVE: | 5 lbs per 1,000 ft² |
| Max RH: | 75% |
| Max pH: | 10 |
| Adhesive Color: | White |
| Trowel Notch: | 1/16” x 1/16” x 1/16” Square Notch |
| Spread Rate: | 125 ft² per Gallon |
660 (2 Part)
Two part polyurethane adhesive. Recommended for use with non-conductive Colorex SD/EC Tile applications. VOC Emissions: <12 grams per liter (calculated per CA South Coast Rule 1168).
Part A SDS
Part B SDS
Technical Data Sheet
Technical Data Sheet (Spanish)
| Packaging: | 1/2 Gallon, 1 Gallon, or 2 Gallon |
| Max MVE: | 6 |
| Max RH: | 80% |
| Max pH: | 9 |
| Adhesive Color: | Grey |
| Trowel Notch: | 1/16” x 1/16” x 1/16” Square Notch |
| Spread Rate: | 110-120 ft² per Gallon |