Download our handy Adhesive Guide
Download the installation instructions for our Flotex ranges here:
Adhesives
Solvent free commercial pressure sensitive adhesive with low VOC.
| Article reference: | PS1 |
| package: | 15L |
| Spreading Capacity: | V1 notch trowel: Approx. 5m² per litre Long nap roller: Approx. 8m² per litre |
Solvent-free floor covering adhesive with a high initial grab for the installation of PVC floor covering in sheets and tiles, cushion vinyl, PVC backed carpet, rubber floor covering in sheets and tiles with a smooth back and polyolefin floor covering. Solvent-free, non-flammable, easy and safe to apply, high initial adhesion strength and final bond strength, favourable spreading capacity, roller-castor-chair resistant.
| Article reference: | 540 |
| SAP nr: | 29403 |
| Package: | 10 l. (13 kg) |
| Spreading capacity: | 0-350 g/m², depending on the back of the floor covering |
| and condition of the subfloor. |
Subfloor and Underlay
The Forbo Quickfit system comprises self-adhering MDF panels and damp-proof sound insulating Forbo foam. Forbo Quickfit offers: A rapid, smooth finish. Quick and easy installation. No visible subfloor seams. Excellent moisture barrier. Easily removable. Improved impact sound insulation in combination with Forbo Foam (Δ Lw= 23 dB according to NEN-EN-ISO 140-8 and 717-2).
| SAP nr: | 60696 |
| Spreading capacity: | 3.6 m² per pack, 36 m² per pallet |
Polypropylene foam laminated with metallised polypropylene foil. The foil top layer incorporates a self-adhesive overlap of 20 cm for secure seams.
| SAP nr: | 64799 |
| Package: | Roll of 25 linear metres PE foam, 100 cm wide, 4.5 mm thick. |
The unique construction of Flotex is what allows it to release soiling like no other textile flooring can. The smooth straight fibers of Flotex do not trap particles of soil, allowing them to be removed without difficulty during cleaning.
Flotex Cleaning and Maintenance
Protect newly laid floors
All newly laid floors should be covered and protected from all other trades during the contract with a suitable non-staining protective covering. Use protective feet on chairs and tables to reduce scratching. Castor wheels should be of soft material suitable for resilient floor coverings (according to EN425)
Use Entrance Systems
As much as 80% of dirt entering a building is brought in by foot traffic. Entrance flooring systems of an appropriate size (ideally more than 6lm) and quality should be used. Forbo Coral or Nuway entrance flooring systems, are independently proven to remove and retain up to 94% of all dirt and moisture entering a building by foot traffic; reducing maintenance costs and maximising appearance retention of adjacent flooring products as well as reducing slip risk. As with any dirt removal system all entrance flooring systems should be regularly cleaned to release the dirt which has been removed.
Forbo Coral | Entrance Flooring System
Cleaning
• Regular cleaning is more beneficial and cost effective than occasional deep cleaning.
• Use recommended cleaning products. High quality cleaning products and equipment ensure efficient maintenance and represent only a small proportion of maintenance costs.
• Always follow the manufacturer’s instructions for cleaning products.
• Always follow the Health and Safety guidance provided.
Proper use of Floor Care Chemicals
The improper use of cleaning chemicals may cause damage and/or discolouration. Overuse or inadequate rinsing of cleaning chemicals may compromise the performance of the floor.
Abrasive powders or cleansers should not be used.
Protect newly laid floors
All newly laid floors should be covered and protected from all other trades during the contract with a suitable non-staining protective covering. Use protective feet on chairs and tables to reduce scratching. Castor wheels should be of soft material suitable for resilient floor coverings (according to EN425)
Seal & Primers
Primer for reducing the need of using copper strip when installing a conductive floor.
Solvent-free, non-flammable, favourable spreading capacity, electrical resistance < 105 Ohm, measured in accordance with DIN 53 276.
| Article reference: | 041 |
| SAP nr: | 37123 |
| Package: | 10 l. (10.1 kg) |
| Spreading capacity: | 6-8 m²/litre |
Watch our youtube video guide for more information: