Seal & Primers
Solvent-free damp proof membrane for suppressing residual construction moisture in sand/cement screeds. Solvent-free, easy application, favourable spreading capacity, non-flammable, fast drying.
| Article reference: | 026 |
| SAP nr: | 35355 |
| Package: | 10 l. (12.4 kg) |
| Spreading capacity: | First coat (diluted 1:1 with water) approx. 50 g/m². |
| Second and third coat (undiluted) 50-75 g/m² per coat. |
Universal primer to improve the adhesion of levelling compounds onto all types of absorbent and non-absorbent subfloors.
Universal application, very low VOC-emission, emicode EC1, favourable spreading capacity.
| Article reference: | 044 |
| SAP nr: | 36689 |
| Package: | 10 l. (10.1 kg) |
| Spreading capacity: | 100-200 g/m², depending on the application. |
Primer to improve the adhesion of levelling compounds on absorbent, stony subfloors. For improving the top-layer of absorbent, stony subfloors. User friendly, non-flammable, favourable spreading capacity, high penetration capacity. Suitable for any type of subfloor that is sound, clean and permanently dry.
| Article reference: | 049 |
| SAP nr: | 34956 |
| Package: | 10 l. (10kg) |
| Spreading capacity: | 100-150 g/m², depending on the application. |
Primer for reducing the need of using copper strip when installing a conductive floor.
Solvent-free, non-flammable, favourable spreading capacity, electrical resistance < 105 Ohm, measured in accordance with DIN 53 276.
| Article reference: | 041 |
| SAP nr: | 37123 |
| Package: | 10 l. (10.1 kg) |
| Spreading capacity: | 6-8 m²/litre |
Subfloor levelling
Self-smoothing levelling compound for levelling of cement-based and other stony floors in layers up to maximum 8 mm which are to be covered with a floor covering. Roller-castor-chair resistant from 2 mm. Less dust. Very low VOC-emission, emicode EC1, self-smoothing, high flow, maximum layer thickness of 8 mm.
| Article reference: | 975 |
| SAP nr: | 31994 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.5 kg/m² per mm layer thickness. |
Dust-reduced, self-smoothing very high quality levelling compound for levelling of cement-based and other stony floors in layers op to maximum 20 mm which are to be covered with a floor covering. In most cases a primer is not necessary. Roller-castor-chair resistant from 1 mm. Up till 90% less dust. Self-smoothing, low-tension, excellent flow, pumpable, high compression strength, maximum layer thickness of 20 mm, less dust, very low VOC-emission, emicode EC1, suitable for use under parquet floors.
| Article reference: | 990 |
| SAP nr: | 34953 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.4 kg/m² per mm layer thickness. |
Self-smoothing, very high quality fast drying levelling compound. Suitable for levelling of cement-based and other stony floors in layers up to maximum 20 mm. At 20° C and a relative humidity of < 70%, the levelling compound layer is ready for the installation of linoleum, needlefelt, carpet and PVC floor covering, after 3-4 hours. Roller-castor-chair resistant from 1 mm. Very low VOC-emission, emicode EC 1, fast drying, low-tension, excellent flow, high compression strength, maximum layer thickness of 20 mm, roller-castor-chair resistant from 1 mm. Less dust.
| Article reference: | 991 |
| SAP nr: | 29603 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.5 kg/m² per mm layer thickness. |
The Forbo Quickfit system comprises self-adhering MDF panels and damp-proof sound insulating Forbo foam. Forbo Quickfit offers: A rapid, smooth finish. Quick and easy installation. No visible subfloor seams. Excellent moisture barrier. Easily removable. Improved impact sound insulation in combination with Forbo Foam (Δ Lw= 23 dB according to NEN-EN-ISO 140-8 and 717-2).
| SAP nr: | 60696 |
| Spreading capacity: | 3.6 m² per pack, 36 m² per pallet |
Polypropylene foam laminated with metallised polypropylene foil. The foil top layer incorporates a self-adhesive overlap of 20 cm for secure seams.
| SAP nr: | 64799 |
| Package: | Roll of 25 linear metres PE foam, 100 cm wide, 4.5 mm thick. |
For the carpet tiles collection Forbo offers transition strips to make transitions between the carpet and other types of floor coverings, such as resilient floors or entrance floors. These strips are available in a palette of colours that match the colours of Forbo's flooring collections.
Edging strip for transition between resilient flooring and carpet. May also be used as a decorative and hygienic capping strip for coved or Marmoform S skirting.
| Article reference: | WA |
| Length: | 50 m coil |
| Number per carton box: | 1 |
| Colours: | see image |
| Min. order special colours: | 3000 m |
Transition strip for use with carpet, carpet tile or entrance mats to resilient flooring. May also be used for forming curved transitions, because of its horizontal flexibility.
| Article reference: | WB |
| Length: | 50 m coil |
| Number per carton box: | 1 |
| Colours: | see image |
| Min. order special colours: | 3000 m |
Covering transition strip for use with carpet, carpet tile or entrance mats to resilient flooring.
| Article reference: | WX |
| Length: | 2.3 m |
| Number per carton box: | 20 |
| Colours: | see image |
| Min. order special colours: | 1000 m. |
Junction strip for use between different carpet finishes or between carpets and entrance mats.
| Article reference: | WO |
| Length: | 2.3 m |
| Number per carton box: | 20 |
| Colours: | see image |
| Min. order special colours: | 1000 m |
Entrance Flooring Systems will, by their very nature and location, be one of the most "abused" of all floor coverings within a building. Thorough and regular cleaning is essential to ensure optimum performance and to extend the lifespan of the products. The optimal frequency of cleaning is determined by the traffic volume and the level of soiling.
Seal & Primers
Solvent-free damp proof membrane for suppressing residual construction moisture in sand/cement screeds. Solvent-free, easy application, favourable spreading capacity, non-flammable, fast drying.
| Article reference: | 026 |
| SAP nr: | 35355 |
| Package: | 10 l. (12.4 kg) |
| Spreading capacity: | First coat (diluted 1:1 with water) approx. 50 g/m². |
| Second and third coat (undiluted) 50-75 g/m² per coat. |
Universal primer to improve the adhesion of levelling compounds onto all types of absorbent and non-absorbent subfloors.
Universal application, very low VOC-emission, emicode EC1, favourable spreading capacity.
| Article reference: | 044 |
| SAP nr: | 36689 |
| Package: | 10 l. (10.1 kg) |
| Spreading capacity: | 100-200 g/m², depending on the application. |
Primer to improve the adhesion of levelling compounds on absorbent, stony subfloors. For improving the top-layer of absorbent, stony subfloors. User friendly, non-flammable, favourable spreading capacity, high penetration capacity. Suitable for any type of subfloor that is sound, clean and permanently dry.
| Article reference: | 049 |
| SAP nr: | 34956 |
| Package: | 10 l. (10kg) |
| Spreading capacity: | 100-150 g/m², depending on the application. |
Primer for reducing the need of using copper strip when installing a conductive floor.
Solvent-free, non-flammable, favourable spreading capacity, electrical resistance < 105 Ohm, measured in accordance with DIN 53 276.
| Article reference: | 041 |
| SAP nr: | 37123 |
| Package: | 10 l. (10.1 kg) |
| Spreading capacity: | 6-8 m²/litre |
Subfloor levelling
Self-smoothing levelling compound for levelling of cement-based and other stony floors in layers up to maximum 8 mm which are to be covered with a floor covering. Roller-castor-chair resistant from 2 mm. Less dust. Very low VOC-emission, emicode EC1, self-smoothing, high flow, maximum layer thickness of 8 mm.
| Article reference: | 975 |
| SAP nr: | 31994 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.5 kg/m² per mm layer thickness. |
Dust-reduced, self-smoothing very high quality levelling compound for levelling of cement-based and other stony floors in layers op to maximum 20 mm which are to be covered with a floor covering. In most cases a primer is not necessary. Roller-castor-chair resistant from 1 mm. Up till 90% less dust. Self-smoothing, low-tension, excellent flow, pumpable, high compression strength, maximum layer thickness of 20 mm, less dust, very low VOC-emission, emicode EC1, suitable for use under parquet floors.
| Article reference: | 990 |
| SAP nr: | 34953 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.4 kg/m² per mm layer thickness. |
Self-smoothing, very high quality fast drying levelling compound. Suitable for levelling of cement-based and other stony floors in layers up to maximum 20 mm. At 20° C and a relative humidity of < 70%, the levelling compound layer is ready for the installation of linoleum, needlefelt, carpet and PVC floor covering, after 3-4 hours. Roller-castor-chair resistant from 1 mm. Very low VOC-emission, emicode EC 1, fast drying, low-tension, excellent flow, high compression strength, maximum layer thickness of 20 mm, roller-castor-chair resistant from 1 mm. Less dust.
| Article reference: | 991 |
| SAP nr: | 29603 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.5 kg/m² per mm layer thickness. |
The Forbo Quickfit system comprises self-adhering MDF panels and damp-proof sound insulating Forbo foam. Forbo Quickfit offers: A rapid, smooth finish. Quick and easy installation. No visible subfloor seams. Excellent moisture barrier. Easily removable. Improved impact sound insulation in combination with Forbo Foam (Δ Lw= 23 dB according to NEN-EN-ISO 140-8 and 717-2).
| SAP nr: | 60696 |
| Spreading capacity: | 3.6 m² per pack, 36 m² per pallet |
Polypropylene foam laminated with metallised polypropylene foil. The foil top layer incorporates a self-adhesive overlap of 20 cm for secure seams.
| SAP nr: | 64799 |
| Package: | Roll of 25 linear metres PE foam, 100 cm wide, 4.5 mm thick. |
For the carpet tiles collection Forbo offers transition strips to make transitions between the carpet and other types of floor coverings, such as resilient floors or entrance floors. These strips are available in a palette of colours that match the colours of Forbo's flooring collections.
Edging strip for transition between resilient flooring and carpet. May also be used as a decorative and hygienic capping strip for coved or Marmoform S skirting.
| Article reference: | WA |
| Length: | 50 m coil |
| Number per carton box: | 1 |
| Colours: | see image |
| Min. order special colours: | 3000 m |
Transition strip for use with carpet, carpet tile or entrance mats to resilient flooring. May also be used for forming curved transitions, because of its horizontal flexibility.
| Article reference: | WB |
| Length: | 50 m coil |
| Number per carton box: | 1 |
| Colours: | see image |
| Min. order special colours: | 3000 m |
Covering transition strip for use with carpet, carpet tile or entrance mats to resilient flooring.
| Article reference: | WX |
| Length: | 2.3 m |
| Number per carton box: | 20 |
| Colours: | see image |
| Min. order special colours: | 1000 m. |
Junction strip for use between different carpet finishes or between carpets and entrance mats.
| Article reference: | WO |
| Length: | 2.3 m |
| Number per carton box: | 20 |
| Colours: | see image |
| Min. order special colours: | 1000 m |
Entrance Flooring Systems will, by their very nature and location, be one of the most "abused" of all floor coverings within a building. Thorough and regular cleaning is essential to ensure optimum performance and to extend the lifespan of the products. The optimal frequency of cleaning is determined by the traffic volume and the level of soiling.