Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Series 9

Side flexing and spiral belts l Pitch 50 mm (1.97 in)
Belts for medium to heavy-duty food and non-food applications


Series 9 – Excerpt from Prolink Engineering Manual

Design characteristics

  • Suitable for both straight and radius conveying
  • 57 % open area for excellent air circulation and drainage
  • Stainless steel hinge pins for high load capacity, lateral stiffness, less belt supports and minimum belt lifting in curves
  • No potential belt edge catch points due to safe fixing of hinge pin

Series 9 - Design characteristics

Basic data

Pitch 50 mm (1.97 in)
Belt width min.100 mm (3.9 in)
Width increments50 mm (1.97 in)
Hinge pinsStainless steel

Prolink Series 9 Basic Data

S9-57 GRT | 57% Opening | Grid top

  • Open area (57 %) for excellent air circulation and drainage
  • Lattice-shaped surface

S9-57 GRT

S9-57 NTP | 57% Opening | Nub top (round studs)

  • Open area (57 %) for excellent air circulation and drainage
  • Lattice-shaped surface with 3.0 mm (0.12 in) high round studs 4 % contact area
  • Nub top surface for increased grip and reduced contact area for good release

S9-57 NTP

S9-57 GRT G | 57% Opening | Grid top · guided

  • Open area (57 %) for excellent air circulation and drainage
  • Lattice-shaped surface
  • Guided version (G) allows utilisation
    of the entire belt width

S9-57 GRT G

S9-57 NTP G | 57% Opening | Nub top (round studs) · guided

  • Open area (57 %) for excellent air circulation and drainage
  • With round studs for increased grip (4 % contact area)
  • Guided version (G) allows utilisation of the entire belt width

S9-57 NTP G

S9-57 GRT F2, F3, F4, F5, F6, F7, F8 | 57% Opening

  • Open area (57 %) for excellent air circulation and drainage
  • Special edge modules with noses (F2 –F8) of varying size ensure smooth belt operation when the system turn radius is greater than the minimum belt turn radius

S9-57 GRT F2, F3, F4, F5, F6, F7, F8

Sprockets

in different sizes with round or square sprocket bore

Series 9 - Sprockets

Profiles

in different heights and designs for inclines

Series 9 - Profiles

Side guards

in different heights for retention of bulk products

Series 9 - Sideguards

Further Information

  • 888 Series 9 EN – Excerpt from Prolink engineering manual

    Series 9
    Excerpt from Prolink Engineering Manual