Linoleum Installation & Floorcare

Forbo offers a wide range of installation, cleaning and maintenance products via our sister company Forbo Eurocol.
If you have any questions about installation, please Contact us

Installation Products
Download installation instructions

Marmoleum sheet
Installation guide

Marmoleum modular tiles
Installation guide

Marmoleum Ohmex
Installation guide

Furniture linoleum
installation guide

Corkment underlay
Installation guide

Installing over underfoot heating
Factsheet

"Yellowing" Marmoleum
product factsheet

Technical Bulletin
Repairing Marmoleum
Adhesives for Marmoleum

611 Eurostar Lino Plus (previously 614)

Very low VOC-emission linoleum adhesive with a high initial grab for the installation of linoleum in sheets and tiles, linoleum aquajet designs and borders, and cork-underlay. Roller-castor-chair resistant. This was previously the 614 Eurostar Lino Plus.

Suitable for: Marmoleum sheet, tile & plank (excl. Marmoleum Decibel) and Corkment underlay.

611 Eurostar Lino Plus Safety Data sheet
614 Eurostar Lino Plus Safety Data Sheet
614 Eurostar Lino Plus TVOC emissions test certificate
Basis Synthetic resin dispersion
Packaging 10 litres (11 kg)
Approx. coverage 28-35 m²*
Tool: V2 trowel
Shelf life 12 months, unopened

F54

A high performance water-based adhesive with a high initial grab and low VOC. F54 is a superior dispersion polymer blend adhesive designed for the installation of Marmoleum Decibel. Once cured, it provides a strong permanent bond.

Suitable for: Marmoleum Decibel

F54 Safety Data Sheet
F54 Technical Specifications
F54 TVOC EMISSIONS test CERTIFICATE
Basis Polymer blend
Packaging 12 litres (14 kg)
Approx. coverage up to 56 m²*
Tool: V1 trowel
Shelf life 12 months, unopened

*Coverage rates will vary depending on the nature and porosity of the substrate.

615 Eurostar Lino EL (EC-1 conductive)

Solvent-free conductive linoleum adhesive with a high initial grab, very low VOC-emission. Electrical resistance < 105 Ohm, non flammable, easy, and safe to apply, favourable spreading capacity, roller-castor-chair resistant.

Suitable for: Marmoleum Ohmex
615 Eurostar Lino EL Safety Data Sheet
615 EUROSTAR LINO EL technical specifications
Basis Superior acrylic dispersion
Packaging 10 litres (11 kg)
Approx. coverage up to 42 m²*
Tool: V1 trowel
Shelf life 12 months, unopened

*Coverage rates will vary depending on the nature and porosity of the substrate.
Note: If alternative adhesives are to be used with Forbo flooring consult with the supplier for usage information, guidance, and warranty. Forbo does not warrant other adhesives. For further information, please download our warranty statement
Installation Downloads

for further technical documents

Youtube

installation videos

Contact us

by filling in this contact form

Marmoleum

discover all collections

Underlays

Corkment
Technical Specification
Sarlibase Acoustic
Technical Specification
Quickfit
Technical Specification
Sarlibase Acoustic
Installation Guide
Quickfit System
Installation Guide
Corkment
Installation Guide

Subfloor and Underlay Systems

Forbo Quickfit Panels

The Forbo Quickfit system comprises self-adhesive MDF panels and moisture resistant, sound insulating Forbo foam. A floating MDF substrate that is not bonded to the subfloor and provides a smooth and flat surface for resilient flooring installation while mitigating issues beneath. Must be used in conjunction with Forbo foam.

Suitable to use with: Marmoleum 2.5 mm sheet
Quickfit safety datasheet

Product advantages:	Solution for:
Quick & easy installation	Over heritage listed floor
Provides a rapid smooth finish	Over existing subfloor
No visible subfloor seams	Over problem subfloors
Excellent moisture barrier	e.g cracked concrete
Easily removable	Temporary installation
Improved impact sound insulation with Forbo foam

Order unit:	1 pack (3.6 m²)
Gauge:	7.00 mm (lower panel :3.0mm / upper panel: 4.0mm
Length / width	1200 mm x 600 mm panels
Impact sound reduction	12 dB (Marmoleum 2.5 mm + Forbo foam = 23 dB)

Forbo Foam

Polypropylene foam laminated with metallised polypropylene foil. The foil top layer incorporates a self-adhesive overlap of 20 cm to secure seams.

Order unit:	1 roll (25lm)
Gauge:	4.0mm
Width:	1m

Corkment

An acoustic underlay designed for use with Forbo Marmoleum sheet.

Suitable with: Standard Marmoleum sheet & Modular tiles
Not recommended for use with Marmoleum Acoustic or Marmoleum Decibel
Corkment safety datasheet

Gauge:	2.0mm
Roll width:	2.0m
Roll length:	≤ 30 m
Impact sound reduction:	≤14 dB (with Marmoleum 2.5 mm sheet)

corkment acoustic underlay for linoleum flooring

Sarlibase Acoustic

A PVC acoustic underlay with 18 dB sound reduction.

Suitable with standard Marmoleum sheet
Not recommended for use with Marmoleum Acoustic or Marmoleum Decibel

Sarlibase Acoustic safety data sheet

Gauge:	2.0mm
Roll width:	2.0m
Roll length:	35 lm
Impact sound reduction:	≥18 dB

Floorcare
Download cleaning & maintenance guide for our Marmoleum collections

Marmoleum
Cleaning & Maintenance guide

Furniture Linoleum
Cleaning & Maintenance guide

Marmoleum and vinyl floor care
Using forbo monel

Monel Brochure
All purpose pH neutral detergent
Marmoleum
Regular cleaning video

Forbo Monel (pH neutral all-purpose cleaner)

An effective, pH neutral all-purpose floor cleaner with a matte finish that protects all vinyl, linoleum, cork, laminate and timber floors.

Monel cleans and protects, lightly dabbed on a cloth it can be used to fix scratches, blemishes, and scuffs.
Article reference: 818
Package: 12 x 1L bottles

Monel Material Safety Data Sheet

Protect newly laid floors

Did you know as much as 80% of dirt entering a building is brought by foot traffic? Investing in a high quality entrance flooring system such as Forbo’s Coral, an international market leader in textile entrance flooring for almost 50 years!

Coral has been proven to stop up to 95% of dirt and moisture and reduce cleaning times of floor covering by up to 65%!
VIEW OUR CORAL COLLECTION

Floorcare advice

Note: As with all newly installed floor coverings Marmoleum should be protected from heavy traffic, particularly high point load wheeled traffic, for 72 hours and must not be washed for 48 hours after installation.

Note: Avoid the use of highly alkaline products (pH >10). Products, such as strippers and heavy-duty cleaners, can be harmful to people, to the environment and/or to the finish or even to the flooring itself.

Do not take the risk; safe and good alternatives are available for every necessary action. Forbo FloorCare products all fall within a safe pH-range, for other brands consult the supplier.
Floorcare Downloads

for further technical documents

Youtube

Marmoleum cleaning video

Locate

a Monel stockist

Contact us

by filling in this form
Pre-formed coving

Cove-Ezi (pre-formed Marmoleum coving)

A pre-formed linoleum ‘Cove-Ezi’ set-in coving system.

Cove-Ezi is fabricated locally with the same dye lot material as the main flooring finish to prevent any colour batch variation.

For further information & Installation guide download our:
Cove-Ezi Marmoleum pre-formed coving - Information datasheet

Cove-Ezi Internal Corner

The preformed Cove-Ezi Internal corner is a strong, elegant preformed coving that reduces dirt build-up and is easy to install.

The backing support is PVC and resin which forms an internal radius of the cove is 9 - 10mm.
The top edge of the cove is chamfered to remove the Hessian backing to allow for a smooth tight finish against the wall.
Order Unit: 8pce/2.4lm (made to order)
Colours: All colours from stocked range
Height: 100 / 150 / 200 mm
Thickness: 2.5 mm

Cove-Ezi External Corner

The functionality of the Cove-Ezi External corner is the same as the Cove-Ezi internal corner, but it can be installed in outer corners instead of inner corners.
Order unit: 8pce/2.4lm (made to order)
Colours: All colours from stocked range
Height: 100 / 150 / 200 mm

Cove-Ezi Straight Length Coving

Pre-formed Marmoleum skirtings add the finishing touch to the floor.

When the skirting is welded to the linoleum floor, it ensures a hygienic, watertight floor.
Package: 2.40 m (made to order)
Colours: All colours from stocked range
Height: 100 / 150 / 200 mm
Welding
Marmoweld

Marmoweld is a welding rod specifically developed to weld Marmoleum.

For all Marmoleum colours we have developed a matching Marmoweld colour. It is available in uni-colour (round rod) or in multi colour (square rod).

On the Marmoweld page you can find more information about these products.
Forbo Marmoleum Welding rods overview

Marmoweld ETU

Forbo Marmoweld ETU (EZ to use) is a colour matching paste weld/sealer specifically designed for finishing Marmoleum installations.

This product provides an effective solution for filling minor gaps in seams when using the net fit installation method, ensuring a seamless and long-lasting flooring finish.
Spread rate (1 coat) 1 mm gap = ≤ 300 lm, 1.5 mm gap = ≤ 230 lm, 3 mm gap = ≤ 115 lm
Unit size 230 ml

Learn more about Marmoweld ETU

Marmoweld Uni (Solid Colour)

After installation, Forbo's linoleum floorings can be hot-welded for functional, decorative and/or hygienic reasons.

Marmoweld Uni is available in plain colors that perfectly suit the flooring collections.
Package: 50 m
Colours: All Marmoleum colours

Marmoweld safety datasheet

Marmoweld MC (Multi Colour)

After installation, Forbo's linoleum floorings can be hot-welded for functional, decorative and/or hygienic reasons.

The patented multi-colored Marmoweld MC allows creating invisible seams.
Package: 50 m
Colours: Select Marmoleum colours

Marmoweld safety datasheet

To weld or not to weld?

In most of the cases welding a Marmoleum floor is not required. Skilled installers can make perfect joints without using a welding cord. However, sometimes local laws or regulations could make that you need to make sure you put a welding cord between two sheets.

For both situations, Forbo Flooring offers the best solutions. Think about installation guides, instruction videos and welding rods specifically developed for Marmoleum floors.

Visit our Net fit or welding installation page to get more information.

How to weld linoleum flooring

After installing the floor you have the option to weld the seams. This is in many cases not really necessary but some cases ask for it. In this instruction video, we show you how to weld properly.

To view the video FULL SCREEN, click here
FAQ's

Welding frequently asked questions

Contact us

For further information

Locate

your local distributor
Wall Installation

Marmoleum Sheet Wall Installation

Marmoleum are available in rolls 2.00 metres wide and up to 34 lineal metres in length and can be installed with the roll lengths aligned either vertically or horizontally.

Vertical seams can be avoided in most cases with horizontal alignment, but longer lengths may be challenging to install. Material waste is often reduced with vertical alignment.

Heat welding of the seams is not necessary; however external abutments can be covered with a contrasting cover strip or in such cases vertical heat welding may be required.

Marmoleum sheet on the wall installation guide

Reference Images 9 Items
Videos

Marmoleum
Installation video without welding

Forbo Linoleum
Installation video with welding

Marmoleum modular tiles
Installation video

Marmoleum
Regular cleaning video

Marmoleum
Periodic maintenance cleaning video

Furniture Linoleum
Installation video

Furniture Linoleum
Cleaning and maintenance video

Installation Products

Underlays

Floorcare

Pre-formed coving

Welding

Wall Installation

Videos

Download installation instructions

Marmoleum sheet
Installation guide
Marmoleum modular tiles
Installation guide
Marmoleum Ohmex
Installation guide
Furniture linoleum
installation guide
Corkment underlay
Installation guide
Installing over underfoot heating
Factsheet
"Yellowing" Marmoleum
product factsheet
Technical Bulletin
Repairing Marmoleum

Adhesives for Marmoleum

611 Eurostar Lino Plus (previously 614)

Very low VOC-emission linoleum adhesive with a high initial grab for the installation of linoleum in sheets and tiles, linoleum aquajet designs and borders, and cork-underlay. Roller-castor-chair resistant. This was previously the 614 Eurostar Lino Plus.

Suitable for: Marmoleum sheet, tile & plank (excl. Marmoleum Decibel) and Corkment underlay.

611 Eurostar Lino Plus Safety Data sheet
614 Eurostar Lino Plus Safety Data Sheet
614 Eurostar Lino Plus TVOC emissions test certificate

Basis	Synthetic resin dispersion
Packaging	10 litres (11 kg)
Approx. coverage	28-35 m²*
Tool:	V2 trowel
Shelf life	12 months, unopened

611 eurostar lino plus - linoleum flooring adhesive

F54

A high performance water-based adhesive with a high initial grab and low VOC. F54 is a superior dispersion polymer blend adhesive designed for the installation of Marmoleum Decibel. Once cured, it provides a strong permanent bond.

Suitable for: Marmoleum Decibel

F54 Safety Data Sheet
F54 Technical Specifications
F54 TVOC EMISSIONS test CERTIFICATE

Basis	Polymer blend
Packaging	12 litres (14 kg)
Approx. coverage	up to 56 m²*
Tool:	V1 trowel
Shelf life	12 months, unopened

*Coverage rates will vary depending on the nature and porosity of the substrate.

F54 Forbo Permanent bond vinyl sheet and flotex carpet and Marmoleum Decibel adhesive

615 Eurostar Lino EL (EC-1 conductive)

Solvent-free conductive linoleum adhesive with a high initial grab, very low VOC-emission. Electrical resistance < 105 Ohm, non flammable, easy, and safe to apply, favourable spreading capacity, roller-castor-chair resistant.

Suitable for: Marmoleum Ohmex
615 Eurostar Lino EL Safety Data Sheet
615 EUROSTAR LINO EL technical specifications

Basis	Superior acrylic dispersion
Packaging	10 litres (11 kg)
Approx. coverage	up to 42 m²*
Tool:	V1 trowel
Shelf life	12 months, unopened

*Coverage rates will vary depending on the nature and porosity of the substrate.
Note: If alternative adhesives are to be used with Forbo flooring consult with the supplier for usage information, guidance, and warranty. Forbo does not warrant other adhesives. For further information, please download our warranty statement

Corkment
Technical Specification
Sarlibase Acoustic
Technical Specification
Quickfit
Technical Specification
Sarlibase Acoustic
Installation Guide
Quickfit System
Installation Guide
Corkment
Installation Guide

Subfloor and Underlay Systems