Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2



Renovation adhesive to repair hollow areas under linoleum, pressure sensitive and hardens fast after rubbing down the injected adhesive under the floor covering.

  • pdf-product-specification.pdf


  • safety data sheet_eurocol_520_linoleum doctor_uk.pdf

    safety data sheet_eurocol_520_linoleum doctor_uk.pdf

Product Typification

Basis : Latex-dispersion.
Consistency : Thin liquid.

Product advantages:
  • Pressure sensitive renovation adhesive to repair hollow areas under linoleum.
  • Hardens fast after rubbing down the injected adhesive under the floor covering.
  • Suitable over underfloor heating systems.
  • Castor wheel resistant according to DIN EN 12529.
  • For indoor use only.


Consumption : Is based on the damage area.
Curing : Approx 24 hours. *
Flammability : Non-flammable.
Frost resistance : No.
Special quality : Tool kit included.
Specific weight : 0.9 kg/l


To repair hollow areas under linoleum.

Working Process

Tools : Tool kit included.
Open time : 20 minutes.*
Waiting time : None.
Curing : Approx 24 hours. *
Storage : Store cool and free from frost.
Shelf Life : 6 Months, in unopened packaging. After use close the open packaging well.
Cleaner : Water.
Frost-proof : No.
Remarks : Please pay attention to the technical datasheet and technical datasheet issued by the floor covering.
When using brushed, only use of latex brushes is recommended. Brushing with conventional brushed leads to coagulations of the adhesive which becomes then useless.
After the repair, it is advisable to clean the floor. Eurocol recommends 898 Euroclean Longlife.Wear protective gloves / eye protection.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Is based on the damage area.

  • One of the materials to be bonded must be water absorbent.
  • Only hollow areas that have not been created by the effects of moisture from the substrate can be renovated.

User manual:
  • Before use, temper the product according to the processing conditions.
  • Shake before use!
  • Drill hollow areas with a 4 mm drill bit. Draw the repair adhesive into the syringe supplied and inject it under the hollow area.
  • Immediately spread the adhesive from the centre outwards with a hammer and rub from the outside inwards.
  • If any adhesive leaks out, immediately absorb it with a damp cloth and clean the area with clear water.
  • The adhesive immediately builds up strength so that reworking is generally not necessary.
    The drill hole can be sealed "invisibly" with a fusible wire.

Processing conditions:

at least 15 °C floor temperature,
at least 18°C material and room temperature,
35-75% relative humidity, recommended <65%.

Environment and health

Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Bound material residues can be disposed of as household waste.
MSDS : Available on request.
Substances causing allergy : Contains natural latex. May produce an allergic reaction.


artikelproductnamepackagingshipping unit
Linoleum Doctor - Set
plastic bottle à 0,5 kg, 2 syringes per box