SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

eurocol
078 EUROPRIMER POLARIS

078

Frost resistance universal primer, water dilutable concentrate for different types of absorbent and non-absorbent subfloors, universal bonding promotor for dense subfloors, deeply penetrating primer for extremely absorbent subfloors, frost resistant and perfect for winter transport.

078_europrimer polaris.jpg
  • pdf-product-specification.pdf

    pdf-product-specification.pdf

  • safety data sheet_078_europrimer_polaris_uni_uk.pdf

    safety data sheet_078_europrimer_polaris_uni_uk.pdf

Product Typification

TODO
Colour : White.
Consistency : Liquid.

Product advantages:
  • Frost-resistant for transport (re-defrostable) primer.
  • To be diluted with water for priming of absorbent and non-absorbent substrates, before levelling or adhesion works. Dilution depending on the subfloor.
  • Fast film building and drying.
  • Can be applied on underfloor heating systems.
  • For indoor use.

Performances

Consumption : depending on substrate approx. 100-150 g/m²,
increased absorbency of substrates can lead to increased consumption.
Frost resistance : Yes.
Special quality : Frost-resistant (for winter transport) concentrate.

Application

Application:
  • as a dust-binding primer on absorbent surfaces,
  • as adhesion promoter on dense substrates

before filling or gluing work.


Working Process

Tools : Foam roller or lambswool roller.
Mixing ratio : undeluted on wooden subfloors and anhydrite floors. 1 : 1 on stony absorbent subfloors and on impervious subfloors .
Storage : Store cool and free from frost.
Shelf Life : Approx 15 months, in unopened packaging. After use close the open packaging well.
Drying : 15 hour on impervious subfloors, wooden subfloors, 0,5 hours on stony absorbent subfloors, 15 hours on anhydrite floors.*
Cleaner : Water.
Frost-proof : Yes.
Remarks : Please pay attention to the technical data sheet and safety data sheet issued by the floor covering manufacturer. 
Relevant norms and regulations are to be respected.
Cannot be applied on old stone panel screeds and magnesia screeds and under 1 and 2 component parquet adhesives. Not suitable for water-soluble adhesive residues (such as sulfite waste adhesives) or fixings.
For subsequent self-levelling and bonding of parquet use Eurocol 048 Europrimer Plus. For self-levelling thicker than 10 mm, Eurocol reactive primers are to be used.
For subsequent self-leveling over 10 mm thickness is it necessary to use Eurocol reactive primers.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
depending on substrate approx. 100-150 g/m²,
increased absorbency of substrates can lead to increased consumption.

Substrate:
  • The substrate must be pressure- and tension-resistant, permanently dry, free of cracks and dust, even and free of layers that reduce adhesion.
  • Adhesion-reducing layers, old material residues must be removed by suitable mechanical measures in accordance with the specifications of DIN 18365/DIN 18356.
  • Old fixed floors, such as ceramic tiles, terrazzo, stone floors, must be thoroughly cleaned and sanded matt after drying.
  • Cracks or joints (except structural expansion joints) are to be closed with Eurocol Europlan 913 Silicate sealing compound.
  • In case of defects, objections are to be reported in writing.


User manual:
  • Shake the container before use!
  • Before application, let product acclimatize to room temperature.
  • Depending on the application area, dilute and mix carefully.
  • Apply evenly without creating puddles.
  • The drying time depends on the quantity applied, as well as the room temperature and humidity. Let the primer fully dry before continuing further.

Pay attention to the table:

Subfloor


Dilution

Drying time

To use with cementitious Eurocol levelling compounds

 

 

Absorbent cement-basedscreeds

1:1

0,5 hrs


Calciumsulfate-based screeds (Anhydrite)

undiluted

15 hrs


Dry screeds

undiluted

15 hrs


Dense subfloors, ceramic tiles.

undiluted

15 hrs


 Mastic asphalt

1:1

15 hrs


 Wooden composite boards

undiluted

15 hrs


To use with calcuim-sulphate Eurocol levelling compounds

Dilution

Drying time

cement screeds


1:1

15 hrs

Calciumsulfate-based screeds and dry screeds

unditulted

Approx. 1 hour for complete drying in 5 mm thickness. For application above 5 mm, drying time is increased to 15 hrs.

 

composite boards

unditulted

15 hrs


For intermediate priming of cementitious, self-levelling or stable levelling compounds in their multi-layer installation, the first levelling layer must be completely dry. The intermediate primer is applied with a dilution of 1:4 with water!

For direct bonding of textile flooring on standard screed, dilute 1:4 (water) to bind residual dust.

Working conditions:
Required surrounding temperature: min. 18°C.
Material and subfloor temperature: min. 15°C.
Relative humidity: 35 - 75%, recommended <65%.





Quality and guarantee

Environment and health

GISCODE : D2
LEED : VOC 40,8 g/l
DGNB : VOC 4 %, quality level: 3
Hazard Class : None.
Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Material residues can be disposed of as household waste.
MSDS : Available on request.
Substances causing allergy : Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction.


Articles

artikelproductnamepackagingshipping unit
078Europrimer PolarisPE jerry can à 10 kg60/pallet