Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2



Floor primer, very low emission, emicode EC 1PLUS, user friendly, non-flammable, favourable spreading capacity and high penetration capacity.

  • leed uk.pdf

    leed uk.pdf

  • breeam uk.pdf

    breeam uk.pdf

  • epdfeica-epd049 europrimer abs-uk.pdf

    epdfeica-epd049 europrimer abs-uk.pdf

  • 049-ec 1 plus licence uk.pdf

    049-ec 1 plus licence uk.pdf

  • pdf-product-specification.pdf


  • 049-safety data sheet uk.pdf

    049-safety data sheet uk.pdf

Product Typification

Floor primer.
Basis : Acrylic dispersion.
Colour : Blue.
Consistency : Thin liquid.

Product advantages:
  • Very low emission 
  • User friendly
  • Non-flammable 
  • Favourable spreading capacity
  • High penetration capacity 


Classification : Emicode EC 1PLUS tested conform EN 13999-2/4.
Consumption : 100 - 150 g/m².*
Specific weight : 1.0 kg/l.



Primer for:

  • improving the adhesion of levelling compounds on absorbent and stony subfloors
  • improving the top-layer of absorbent and stony subfloors
  • self-levelling anhydrite floors, that must be levelled and/or on which a floor covering must be applied. 

Working Process

Tools : Lambswool roller, brush or spray-gun.
Storage : Store free from frost. Protect against high temperatures.
Shelf Life : 12 months, in unopened packaging.
Drying : 1 - 2 hours.*
Cleaner : Water.
Sensitive to frost : Good resistance after complete drying.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

100 - 150 g/m².*

  • The subfloor must be moisture-absorbent and have a good tensile and compression strength. The subfloor should also be clean, permanently dry and free from grease, dirt and dust, according to the requirements of BS 8203 or DIN 18 365.
  • For the requirements pertaining to calcium sulphate-bound cast floors we refer to the CUR recommendation [Cast floors with calcium sulphate as a binding agent] (Foundation CUR in Gouda), number 107.
  • On very porous anhydrite subfloors we advice, to avoid the chance of an orange peel effect, to apply 2 coats of 044 Europrimer Multi or 1 coat of 043 Europrimer Alphy.
  • In advance always seek our technical data sheets. In doubt about the application ask for technical advice.

User manual:
  • Apply 049 Europrimer ABS evenly and covered with a lambswool roller and/or brush.
  • If required 049 Europrimer ABS can also be applied with a spray-gun.
  • After drying the subfloor can be treated as required. 
  • Clean tools immediately after use with water. 
  • Remove fresh spots immediately with water.
  • Avoid contact with eyes and skin and use suitable personal protection equipment (please refer to our safety sheet).
  • Product residues and cleaning water drains according to local applicable environmental rules and do not drain in the sewer.

Working conditions:
Intended surrounding temperature : 15° - 23 °C.
Material and subfloor temperature : min. 10° - max 25 ºC.
Relative humidity : 40 - 70%.

Contains methylchloroisothiazolinone and methylisothiazolinone (3:1). May produce an allergic reaction.

Quality and guarantee

Environment and health

Hazard Class : None.
Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155.
MSDS : Available on request.


049Europrimer ABS  10 kg jerry can8 710345 049016