SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

eurocol
026 EUROBLOCK MULTI

026

Universal moisture barrier for sealing out residual moisture and rising damp in sand-cement floors (first allow monolith floors to be exposed to light). When applied in 2 layers, suitable under, for example, linoleum. When applied in 3 layers, suitable under vapour-tight floor coverings such as PVC and rubber. The first layer should be applied diluted 1:1 with water. The residual moisture percentage in the subfloor may not exceed 4.0% (CM) during installation. Suitable for indoor use. Thanks to EMICODE EC 1PLUS (very low emission) also suitable for BREEAM projects.

026-euroblock-multi.jpg
  • 026 ec1plus_licence uk.pdf

    026 ec1plus_licence uk.pdf

  • 026-safety data sheet uk.pdf

    026-safety data sheet uk.pdf

  • pdf-product-specification.pdf

    pdf-product-specification.pdf

Product Typification

Universal moisture barrier for sealing out residual moisture and rising damp in sand-cement floors (first allow monolith floors to be exposed to light). When applied in 2 layers, suitable under, for example, linoleum. When applied in 3 layers, suitable under vapour-tight floor coverings such as PVC and rubber. The first layer should be applied diluted 1:1 with water. The residual moisture percentage in the subfloor may not exceed 4.0% (CM) during installation. Suitable for indoor use. Thanks to EMICODE EC 1PLUS (very low emission) also suitable for BREEAM projects.
Basis : Polyvinylidene chloride.
Colour : Blue.
Consistency : Thin liquid.

Product advantages:
  • Suitable for underfloor heating
  • Easy application
  • Favourable spreading capacity
  • Non-flammable
  • Fast drying 
  • Very low-emission installation material certified according to EMICODE EC1 Plus.
  • Declared by baubook, "ecological building product".

Performances

Consumption : First coat When diluted 1:1 with water), approx. 50 g/m².
Second and third coat undiluted Approx. 50 - 75 g/m², per coat.
Curing : 24 hours.*
Flammability : Non-flammable.
Special quality : Damp proof membrane up to 4 CM%, 95 % RF.
Specific weight : 1.24 kg/l.

Application

Application:

For suppressing residual construction moisture in sand/cement screeds, monolith and existing ceramic tile floors:

  • Suitable for all kinds of floor covering when applied in two coats suitable for such as linoleum.
  • Suitable for impervious floor covering when applied in three coats.

Working Process

Tools : Lambswool roller or brush.
Curing : 24 hours.*
Storage : Cool and dry, well sealed at normal temperature (5° - 30 °C).
Shelf Life : 12 months, in unopened packaging.
Drying : First coat 20 minutes.* Second and third coat 60 minutes.*
Cleaner : Water.
Sensitive to frost : Yes.
Remarks : 

Technical information and safety data sheets of other laying materials and floorings must be observed!

Not applicable under parquet installations with 1K SMP adhesives. 

Eurocol 026 Euroblock Multi is not a building sealant according to DIN 18195. Ensure sufficient rear ventilation behind cupboards and skirting boards in the closed off floor construction! Not to be used for damp-proofing on composite cement screeds, on concrete, on moisture-sensitive substrates such as calcium sulphate bonded screeds, magnesia screeds, stone wood screeds, on ceramic tiles, stone floors, terrazzo, mastic asphalt screeds.

EMICODE, further information at www.emicode.com.


* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
First coat When diluted 1:1 with water), approx. 50 g/m².
Second and third coat undiluted Approx. 50 - 75 g/m², per coat.

Substrate:
  • 026 Euroblock Multi is suitable for sand/cement screeds, which have a good tensile and compression strength and are free from cracks. The subfloor should also be clean, dry and free from grease and dirt, according to the requirements of BS 8203 or DIN 18 365.
  • If necessary, sand the surface clean and vacuum it dust-free using an industrial vacuum cleaner
  • Completely remove any floor covering adhesive residue or other contamination, so that a clean subfloor is created
  • Sand monolith floors in advance and remove dust using an industrial vacuum cleaner. Then prime the floor with 044 Europrimer Multi using a foam roller and allow to dry sufficiently. If a paraffin-containing curing compound has been used, the monolith floor must be blasted beforehand.
  • Degrease ceramic flor tiles in advance with 014 Euroclean and allow to dry thoroughly. Then prime the floor with a thin opaque layer with 044 Europrimer Multi using a foam roller. In the case of deepened joints, apply the 044 Europrimer Multi using a fleece roller and then roll with a foam roller so that a thin covering layer is created on the ceramic tiles and allow it to dry sufficiently.
  • The 026 Euroblock Multi moisture barrier can then be applied in one or two undiluted layers.
  • In advance always seek our technical data sheets. In doubt about the application ask for technical advice.

Note:

  • The moisture content of the base must not exceed more than 90% RH.
  • Do not use 026 Euroblock Multi when the construction of the subfloor is exposed to permanent groundwater pressure.


User manual:
  • Apply a first coat 026 Euroblock Multi diluted (1:1 with water) evenly with a lambswool roller and/or brush on the subfloor. This first layer is not required for ceramic tile floors and monolith floors that have been pre-primed with 044 Europrimer Multi.
  • When installing linoleum apply after a drying of the first coat (approx. 20 minutes, depending on temperature, relative humidity and type subfloor) a second undiluted coat 026 Euroblock Multi at right angles to the first (when installing linoleum).
  • When installing an impervious floor covering apply a third undiluted coat 026 Euroblock Multi, again at right angles to the previous coat.
  • Drying time between the second and third coat is approx. 60 minutes (depending on temperature and relative humidity).
  • Before applying a levelling compound the last coat 026 Euroblock Multi has to dry for at least 12 hours. Apply a levelling compound in a minimum layer thickness of 2 mm.
  • Remove any fresh spots immediately with water.
  • Avoid contact with eyes and skin and use suitable protective equipment (see our safety data sheet).
  • Dispose of product residues and cleaning water in accordance with local environmental regulations and do not dispose of them in the sewer.
  • For detailed safety and environmental information, we refer to the safety information sheet on our website www.eurocol.nl..  

Working conditions:
Required surrounding temperature : 18° - 23 °C.
Material and subfloor temperature : min. 15° - max. 20 ºC.
Relative humidity : 40 - 70%.

Further information:

  • Keep out of reach of children.
  • Ventilate the room thoroughly during and after the processing and drying process.
  • Do not eat, drink or smoke while processing this product.
  • Avoid contact with eyes and skin and use suitable protective equipment.
  • In the event of contact with eyes or skin, flush with plenty of water immediately.
  • Dispose of product residues and cleaning water in accordance with local environmental regulations and do not dispose of them in the sewer.
  • Only return packaging for recycling after removing any residues. Dried material residues can be disposed of in household waste.
  • For detailed information about safety measures, please refer to the safety data sheet on our website eurocol.nl.
  • The product contains: no additional data applicable.




Quality and guarantee

Environment and health

GISCODE : D1
LEED : VOC 0 g/l, meets: IEQ Credit 4.1
DGNB : VOC 0 %, quality level: 4
Hazard Class : None.
Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Material residues can be disposed of as household waste.
MSDS : For detailed safety and environmental information, please refer to our website www.eurocol.nl.





Articles

ArticleDefinitionPackagingEAN-code
026Euroblock Multi   12 kg jerry can 8 710345 486026