Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Preparation

Depending on the type of splice different preparation procedures are used individually or in combination with others: Cutting, Splitting/Peeling, Grinding, Punch-cutting

These procedures prepare the belting materials for the splicing procedure in such a way that by using different accessories such as adhesives, mechanical fasteners or pressure and temperature, high-quality and reliable splices are produced.

Cutting

Hand-Held Cutter

Type key

* PC = preparation tools for cutting
*2 LC = longitudinal cutter
HC = hand-held cutter
CC = cross cutter
*3 V = unlimited

Type Key Cutting

Further Information

  • 319 EN – Siegling Belting Splicing equipment

    Splicing technology
    Siegling Belting

  • 279 EN Efficient tools for reliable splicing

    Efficient tools for reliable splicing
    Siegling Belting

Splitting/Peeling

Wedge peeling machines
Peeling and splitting machine

Type key

* PS = preparation tools for splitting/peeling
*2 WD = wedge peeling device
PM = peeling machine
*3 V = unlimited

Type Key Splitting/Peeling

Further Information

  • 319 EN – Siegling Belting Splicing equipment

    Splicing technology
    Siegling Belting

  • 279 EN Efficient tools for reliable splicing

    Efficient tools for reliable splicing
    Siegling Belting

Grinding

Grinding Tool

Type key

* PG = preparation tools for grinding
*2 GM = grinder
HG = hand-held grinder
*3 V = unlimited

Type Key Grinding

Further Information

  • 319 EN – Siegling Belting Splicing equipment

    Splicing technology
    Siegling Belting

  • 279 EN Efficient tools for reliable splicing

    Efficient tools for reliable splicing
    Siegling Belting

Punch-Cutting

Punch press for Z-splices
Punch press for Z-splices (pneumo-hydraulic)
Hand-held Knife
Punch press for Z-splices
Punch press for Z-splices
Punch press for Z-splices
Hand-held shears for Z-splices

Type key

* PP = preparation tools for punch-cutting
*2 ZP = Z-punch tool
ZC = Z-cutter
HP = hand held knife
*3 V = variable
*4 3 = belt thickness in mm
H = hydraulic

Type Key Punch-Cutting

Further Information

  • 319 EN – Siegling Belting Splicing equipment

    Splicing technology
    Siegling Belting

  • 279 EN Efficient tools for reliable splicing

    Efficient tools for reliable splicing
    Siegling Belting