Seal & Primers
Solvent-free damp proof membrane for suppressing residual construction moisture in sand/cement screeds. Solvent-free, easy application, favourable spreading capacity, non-flammable, fast drying.
| Article reference: | 026 |
| SAP nr: | 35355 |
| Package: | 10 l. (12.4 kg) |
| Spreading capacity: | First coat (diluted 1:1 with water) approx. 50 g/m². |
| Second and third coat (undiluted) 50-75 g/m² per coat. |
Universal primer to improve the adhesion of levelling compounds onto all types of absorbent and non-absorbent subfloors.
Universal application, very low VOC-emission, emicode EC1, favourable spreading capacity.
| Article reference: | 044 |
| SAP nr: | 36689 |
| Package: | 10 l. (10.1 kg) |
| Spreading capacity: | 100-200 g/m², depending on the application. |
Primer to improve the adhesion of levelling compounds on absorbent, stony subfloors. For improving the top-layer of absorbent, stony subfloors. User friendly, non-flammable, favourable spreading capacity, high penetration capacity. Suitable for any type of subfloor that is sound, clean and permanently dry.
| Article reference: | 049 |
| SAP nr: | 34956 |
| Package: | 10 l. (10kg) |
| Spreading capacity: | 100-150 g/m², depending on the application. |
Primer for reducing the need of using copper strip when installing a conductive floor. Solvent-free, non-flammable, favourable spreading capacity, electrical resistance < 105 Ohm, measured in accordance with DIN 53 276.
| Article reference: | 041 |
| SAP nr: | 37123 |
| Package: | 10 l. (10.1 kg) |
| Spreading capacity: | 6-8 m²/litre |
Subfloor levelling
Self-smoothing levelling compound for levelling of cement-based and other stony floors in layers up to maximum 8 mm which are to be covered with a floor covering. Roller-castor-chair resistant from 2 mm. Less dust. Very low VOC-emission, emicode EC1, self-smoothing, high flow, maximum layer thickness of 8 mm.
| Article reference: | 975 |
| SAP nr: | 31994 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.5 kg/m² per mm layer thickness. |
Dust-reduced, self-smoothing very high quality levelling compound for levelling of cement-based and other stony floors in layers op to maximum 20 mm which are to be covered with a floor covering. In most cases a primer is not necessary. Roller-castor-chair resistant from 1 mm. Up till 90% less dust. Self-smoothing, low-tension, excellent flow, pumpable, high compression strength, maximum layer thickness of 20 mm, less dust, very low VOC-emission, emicode EC1, suitable for use under parquet floors.
| Article reference: | 990 |
| SAP nr: | 34953 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.4 kg/m² per mm layer thickness. |
Self-smoothing, very high quality fast drying levelling compound. Suitable for levelling of cement-based and other stony floors in layers up to maximum 20 mm. At 20° C and a relative humidity of < 70%, the levelling compound layer is ready for the installation of linoleum, needlefelt, carpet and PVC floor covering, after 3-4 hours. Roller-castor-chair resistant from 1 mm. Very low VOC-emission, emicode EC 1, fast drying, low-tension, excellent flow, high compression strength, maximum layer thickness of 20 mm, roller-castor-chair resistant from 1 mm. Less dust.
| Article reference: | 991 |
| SAP nr: | 29603 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.5 kg/m² per mm layer thickness. |
The Forbo Quickfit system comprises self-adhering MDF panels and damp-proof sound insulating Forbo foam. Forbo Quickfit offers: A rapid, smooth finish. Quick and easy installation. No visible subfloor seams. Excellent moisture barrier. Easily removable. Improved impact sound insulation in combination with Forbo Foam (Δ Lw= 23 dB according to NEN-EN-ISO 140-8 and 717-2).
| SAP nr: | 60696 |
| Spreading capacity: | 3.6 m² per pack, 36 m² per pallet |
Polypropylene foam laminated with metallised polypropylene foil. The foil top layer incorporates a self-adhesive overlap of 20 cm for secure seams.
| SAP nr: | 64799 |
| Package: | Roll of 25 linear metres PE foam, 100 cm wide, 4.5 mm thick. |
Adhesives
Solvent-free floor covering adhesive with a high initial grab for the installation of PVC floor covering in sheets and tiles, cushion vinyl, PVC backed carpet, rubber floor covering in sheets and tiles with a smooth back and polyolefin floor covering. Solvent-free, non-flammable, easy and safe to apply, high initial adhesion strength and final bond strength, favourable spreading capacity, roller-castor-chair resistant.
| Article reference: | 540 |
| SAP nr: | 29403 |
| Package: | 10 l. (13 kg) |
| Spreading capacity: | 0-350 g/m², depending on the back of the floor covering |
| and condition of the subfloor. |
Very low VOC-emission floor covering adhesive with a high initial grab for the installation of PVC floor covering in sheets and tiles, cushion vinyl, PVC backed carpet, rubber floor covering in sheets and tiles with a smooth back and polyolefin floor covering. Very low VOC-emission, emicode EC1, solvent-free, multi-purpose application, easy and safe to apply, favourable spreading capacity, high initial and final bond strength, roller-castor-chair resistant.
| Article reference: | 640 |
| SAP nr: | 29611 |
| Package: | 10 l. (12 kg) |
| Spreading capacity: | 225-275 g/m² |
Very low VOC-emission conductive adhesive with a high initial grab for the installation of conductive carpet, conductive PVC floor covering in sheets and tiles and conductive rubber floor covering in sheets and tiles with a smooth back. Very low VOC-emission, emicode EC1, solvent-free, non-flammable, easy and safe to apply, multi-purpose application, high initial adhesion strength, favourable spreading capacity, roller-castor-chair resistant, electrical resistance < 3*105 Ohm (EN 13 415).
| Article reference: | 641 |
| SAP nr: | 53652 |
| Package: | 10 l. (12 kg) |
| Spreading capacity: | TKB S1: 260-300 g/m² |
| B2: 300-400 g/m² |
Very low-emitting, moisture-resistant flooring adhesive specifically for Natural Linoleum Tiles (e.g. Marmoleum Modular) but also suitable for PVC strips and tiles and rubber tiles, according to the wet-set application method. Good resistance against cleaning water.
| Article reference: | 646 |
| Package: | 15 l. (12kg) |
| Spreading capacity: | 250 - 350 g/m², depending on application |
High quality solvent-free adhesive for the installation of PVC strips and tiles on smooth subfloors. Non-flammable, solvent-free, roller-castor-chair resistant, favourable spreading capacity, no grin through of adhesive trowel marks, easy and safe to apply, high final bond strength.
| Article reference: | 543 |
| Package: | 10 kg bucket |
| Spreading capacity: | 100-150 g/m², on levelled subfloors. |
Low VOC-emission, solvent-free, powerful dispersion-based contact adhesive with a strong adhesion for the two-sided fixing of carpet on stairs, PVC nosing, PVC adhesive skirting, rubber nosing, hollow skirting of hard floor covering and cork floor covering. Low VOC-emission, emicode EC2, solvent-free, powerful enough to bear high tensions, high initial adhesion strength, reactivate through warmth, tool included.
| Article reference: | 650 |
| SAP nr: | 77554 |
| Package: | 5 l. (7.5 kg) |
| Spreading capacity: | 250 g/m² per coat |
Welding Rods
After installation, Forbo's vinyl floorings can be hot-welded for functional, decorative or hygienic reasons. Vinylweld is available in plain colours that perfectly suit the vinyl flooring collections.
| SAP nr: | 50621 |
| Package: | 15 x 42 ml |
| Colours: | all Step and Eternal |
Solvent-based cold welding system providing a seamless appearance to PVC floor coverings for small to moderate commercial applications.
| SAP nr: | 82480 |
| Package: | 42 ml |
| Colours: | transparent liquid - for Novilon |
To give your floor a finishing touch, Forbo offers a collection of high quality covings, flexible profiles and design skirtings. Skirtings provide both a functional and attractive junction between the floor and the wall. Variety of colours and materials allow creations of practical and aesthetical designs. The profiles collection provides a safe and functional transition between different floor coverings. These profiles are available in an attractive palette of colours, matching the colours of Forbo's flooring collections. Stairnosings provide a safe and secure step and prolong the life of the floor covering.
An extruded cove former with a 25 mm internal radius for use with vinyl floor finishes.
| Article reference: | PR |
| SAP nr: | 30942 |
| Package: | 1 pce (2.30 m) |
| Colours: | Black |
Standard size general-purpose stairnosing; top surface is ribbed for improved slip resistance and safety.
| Article reference: | TA |
| Package: | 10 pce (2.30 m) |
| Colours: | see image |
Large general-purpose stairnosing; top surface is ribbed for improved slip resistance and safety.
| Article reference: | TF |
| Package: | 10 pce (2.30 m) |
| Colours: | see image |
Heavy-duty stairnosing for situations where intensive traffic is expected.
| Article reference: | TJ |
| SAP nr: | 30992 |
| Package: | 5 pce (4.50 m) |
| Colours: | black |
Edging strip for transition between resilient flooring and carpet. May also be used as a decorative and hygienic capping strip for coved or Marmoform S skirting.
| Article reference: | WA |
| Length: | 50 m coil |
| Number per carton box: | 1 |
| Colours: | see image |
| Min. order special colours: | 3000 m |
Transition strip for use with carpet, carpet tile or entrance mats to resilient flooring. May also be used for forming curved transitions, because of its horizontal flexibility.
| Article reference: | WB |
| Length: | 50 m coil |
| Number per carton box: | 1 |
| Colours: | see image |
| Min. order special colours: | 3000 m |
Covering transition strip for use with carpet, carpet tile or entrance mats to resilient flooring.
| Article reference: | WX |
| Length: | 2.3 m |
| Number per carton box: | 20 |
| Colours: | see image |
| Min. order special colours: | 1000 m. |
Forbo protection paper for temporary protection of the floor is produced from recycled fibres. Forbo protection paper is a great moisture barrier and is easy to cut.
| SAP nr: | 83462 |
| Size: | 25 m x 1 m |
| Thickness: | 4 mm |
| Packet: | Roll of 75 m2 |
| SAP nr: | 96168 |
| Size: | 25 m x 1 m |
| Thickness: | 4 mm |
| Packet: | Roll |
The Forbo project vinyl collections are easy to clean and maintain, thanks to their smooth and highly durable PUR coated surface.
Floorcare Products
Cleaner is a pH neutral detergent, which leaves no residue and settles practically all common stains and soiling. Clean with Cleaner or Monel and mop: pick up dirty water with wiper and mop or water vac, rinse with clean water and mop, allow floor to dry.
| Article reference: | 816 |
| SAP nr: | 29650/29652 |
| Package: | 10 l |
Monel, based on natural components, offers a practical protection film and perfect cleaning properties in one product. Monel method: apply Monel film using Monel solution and mop, allow floor to dry.
| Article reference: | 818 |
| SAP nr: | 29643/29641 |
| Package: | 10 l |
| Article reference: | 816 |
| SAP nr: | 75982 |
| Package: | 12*1 l |
| Article reference: | 814 |
| SAP nr: | 75985 |
| Package: | 12*1 l |
Seal & Primers
Solvent-free damp proof membrane for suppressing residual construction moisture in sand/cement screeds. Solvent-free, easy application, favourable spreading capacity, non-flammable, fast drying.
| Article reference: | 026 |
| SAP nr: | 35355 |
| Package: | 10 l. (12.4 kg) |
| Spreading capacity: | First coat (diluted 1:1 with water) approx. 50 g/m². |
| Second and third coat (undiluted) 50-75 g/m² per coat. |
Universal primer to improve the adhesion of levelling compounds onto all types of absorbent and non-absorbent subfloors.
Universal application, very low VOC-emission, emicode EC1, favourable spreading capacity.
| Article reference: | 044 |
| SAP nr: | 36689 |
| Package: | 10 l. (10.1 kg) |
| Spreading capacity: | 100-200 g/m², depending on the application. |
Primer to improve the adhesion of levelling compounds on absorbent, stony subfloors. For improving the top-layer of absorbent, stony subfloors. User friendly, non-flammable, favourable spreading capacity, high penetration capacity. Suitable for any type of subfloor that is sound, clean and permanently dry.
| Article reference: | 049 |
| SAP nr: | 34956 |
| Package: | 10 l. (10kg) |
| Spreading capacity: | 100-150 g/m², depending on the application. |
Primer for reducing the need of using copper strip when installing a conductive floor. Solvent-free, non-flammable, favourable spreading capacity, electrical resistance < 105 Ohm, measured in accordance with DIN 53 276.
| Article reference: | 041 |
| SAP nr: | 37123 |
| Package: | 10 l. (10.1 kg) |
| Spreading capacity: | 6-8 m²/litre |
Subfloor levelling
Self-smoothing levelling compound for levelling of cement-based and other stony floors in layers up to maximum 8 mm which are to be covered with a floor covering. Roller-castor-chair resistant from 2 mm. Less dust. Very low VOC-emission, emicode EC1, self-smoothing, high flow, maximum layer thickness of 8 mm.
| Article reference: | 975 |
| SAP nr: | 31994 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.5 kg/m² per mm layer thickness. |
Dust-reduced, self-smoothing very high quality levelling compound for levelling of cement-based and other stony floors in layers op to maximum 20 mm which are to be covered with a floor covering. In most cases a primer is not necessary. Roller-castor-chair resistant from 1 mm. Up till 90% less dust. Self-smoothing, low-tension, excellent flow, pumpable, high compression strength, maximum layer thickness of 20 mm, less dust, very low VOC-emission, emicode EC1, suitable for use under parquet floors.
| Article reference: | 990 |
| SAP nr: | 34953 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.4 kg/m² per mm layer thickness. |
Self-smoothing, very high quality fast drying levelling compound. Suitable for levelling of cement-based and other stony floors in layers up to maximum 20 mm. At 20° C and a relative humidity of < 70%, the levelling compound layer is ready for the installation of linoleum, needlefelt, carpet and PVC floor covering, after 3-4 hours. Roller-castor-chair resistant from 1 mm. Very low VOC-emission, emicode EC 1, fast drying, low-tension, excellent flow, high compression strength, maximum layer thickness of 20 mm, roller-castor-chair resistant from 1 mm. Less dust.
| Article reference: | 991 |
| SAP nr: | 29603 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.5 kg/m² per mm layer thickness. |
The Forbo Quickfit system comprises self-adhering MDF panels and damp-proof sound insulating Forbo foam. Forbo Quickfit offers: A rapid, smooth finish. Quick and easy installation. No visible subfloor seams. Excellent moisture barrier. Easily removable. Improved impact sound insulation in combination with Forbo Foam (Δ Lw= 23 dB according to NEN-EN-ISO 140-8 and 717-2).
| SAP nr: | 60696 |
| Spreading capacity: | 3.6 m² per pack, 36 m² per pallet |
Polypropylene foam laminated with metallised polypropylene foil. The foil top layer incorporates a self-adhesive overlap of 20 cm for secure seams.
| SAP nr: | 64799 |
| Package: | Roll of 25 linear metres PE foam, 100 cm wide, 4.5 mm thick. |
Adhesives
Solvent-free floor covering adhesive with a high initial grab for the installation of PVC floor covering in sheets and tiles, cushion vinyl, PVC backed carpet, rubber floor covering in sheets and tiles with a smooth back and polyolefin floor covering. Solvent-free, non-flammable, easy and safe to apply, high initial adhesion strength and final bond strength, favourable spreading capacity, roller-castor-chair resistant.
| Article reference: | 540 |
| SAP nr: | 29403 |
| Package: | 10 l. (13 kg) |
| Spreading capacity: | 0-350 g/m², depending on the back of the floor covering |
| and condition of the subfloor. |
Very low VOC-emission floor covering adhesive with a high initial grab for the installation of PVC floor covering in sheets and tiles, cushion vinyl, PVC backed carpet, rubber floor covering in sheets and tiles with a smooth back and polyolefin floor covering. Very low VOC-emission, emicode EC1, solvent-free, multi-purpose application, easy and safe to apply, favourable spreading capacity, high initial and final bond strength, roller-castor-chair resistant.
| Article reference: | 640 |
| SAP nr: | 29611 |
| Package: | 10 l. (12 kg) |
| Spreading capacity: | 225-275 g/m² |
Very low VOC-emission conductive adhesive with a high initial grab for the installation of conductive carpet, conductive PVC floor covering in sheets and tiles and conductive rubber floor covering in sheets and tiles with a smooth back. Very low VOC-emission, emicode EC1, solvent-free, non-flammable, easy and safe to apply, multi-purpose application, high initial adhesion strength, favourable spreading capacity, roller-castor-chair resistant, electrical resistance < 3*105 Ohm (EN 13 415).
| Article reference: | 641 |
| SAP nr: | 53652 |
| Package: | 10 l. (12 kg) |
| Spreading capacity: | TKB S1: 260-300 g/m² |
| B2: 300-400 g/m² |
Very low-emitting, moisture-resistant flooring adhesive specifically for Natural Linoleum Tiles (e.g. Marmoleum Modular) but also suitable for PVC strips and tiles and rubber tiles, according to the wet-set application method. Good resistance against cleaning water.
| Article reference: | 646 |
| Package: | 15 l. (12kg) |
| Spreading capacity: | 250 - 350 g/m², depending on application |
High quality solvent-free adhesive for the installation of PVC strips and tiles on smooth subfloors. Non-flammable, solvent-free, roller-castor-chair resistant, favourable spreading capacity, no grin through of adhesive trowel marks, easy and safe to apply, high final bond strength.
| Article reference: | 543 |
| Package: | 10 kg bucket |
| Spreading capacity: | 100-150 g/m², on levelled subfloors. |
Low VOC-emission, solvent-free, powerful dispersion-based contact adhesive with a strong adhesion for the two-sided fixing of carpet on stairs, PVC nosing, PVC adhesive skirting, rubber nosing, hollow skirting of hard floor covering and cork floor covering. Low VOC-emission, emicode EC2, solvent-free, powerful enough to bear high tensions, high initial adhesion strength, reactivate through warmth, tool included.
| Article reference: | 650 |
| SAP nr: | 77554 |
| Package: | 5 l. (7.5 kg) |
| Spreading capacity: | 250 g/m² per coat |
Welding Rods
After installation, Forbo's vinyl floorings can be hot-welded for functional, decorative or hygienic reasons. Vinylweld is available in plain colours that perfectly suit the vinyl flooring collections.
| SAP nr: | 50621 |
| Package: | 15 x 42 ml |
| Colours: | all Step and Eternal |
Solvent-based cold welding system providing a seamless appearance to PVC floor coverings for small to moderate commercial applications.
| SAP nr: | 82480 |
| Package: | 42 ml |
| Colours: | transparent liquid - for Novilon |
To give your floor a finishing touch, Forbo offers a collection of high quality covings, flexible profiles and design skirtings. Skirtings provide both a functional and attractive junction between the floor and the wall. Variety of colours and materials allow creations of practical and aesthetical designs. The profiles collection provides a safe and functional transition between different floor coverings. These profiles are available in an attractive palette of colours, matching the colours of Forbo's flooring collections. Stairnosings provide a safe and secure step and prolong the life of the floor covering.
An extruded cove former with a 25 mm internal radius for use with vinyl floor finishes.
| Article reference: | PR |
| SAP nr: | 30942 |
| Package: | 1 pce (2.30 m) |
| Colours: | Black |
Standard size general-purpose stairnosing; top surface is ribbed for improved slip resistance and safety.
| Article reference: | TA |
| Package: | 10 pce (2.30 m) |
| Colours: | see image |
Large general-purpose stairnosing; top surface is ribbed for improved slip resistance and safety.
| Article reference: | TF |
| Package: | 10 pce (2.30 m) |
| Colours: | see image |
Heavy-duty stairnosing for situations where intensive traffic is expected.
| Article reference: | TJ |
| SAP nr: | 30992 |
| Package: | 5 pce (4.50 m) |
| Colours: | black |
Edging strip for transition between resilient flooring and carpet. May also be used as a decorative and hygienic capping strip for coved or Marmoform S skirting.
| Article reference: | WA |
| Length: | 50 m coil |
| Number per carton box: | 1 |
| Colours: | see image |
| Min. order special colours: | 3000 m |
Transition strip for use with carpet, carpet tile or entrance mats to resilient flooring. May also be used for forming curved transitions, because of its horizontal flexibility.
| Article reference: | WB |
| Length: | 50 m coil |
| Number per carton box: | 1 |
| Colours: | see image |
| Min. order special colours: | 3000 m |
Covering transition strip for use with carpet, carpet tile or entrance mats to resilient flooring.
| Article reference: | WX |
| Length: | 2.3 m |
| Number per carton box: | 20 |
| Colours: | see image |
| Min. order special colours: | 1000 m. |
Forbo protection paper for temporary protection of the floor is produced from recycled fibres. Forbo protection paper is a great moisture barrier and is easy to cut.
| SAP nr: | 83462 |
| Size: | 25 m x 1 m |
| Thickness: | 4 mm |
| Packet: | Roll of 75 m2 |
| SAP nr: | 96168 |
| Size: | 25 m x 1 m |
| Thickness: | 4 mm |
| Packet: | Roll |
The Forbo project vinyl collections are easy to clean and maintain, thanks to their smooth and highly durable PUR coated surface.
Floorcare Products
Cleaner is a pH neutral detergent, which leaves no residue and settles practically all common stains and soiling. Clean with Cleaner or Monel and mop: pick up dirty water with wiper and mop or water vac, rinse with clean water and mop, allow floor to dry.
| Article reference: | 816 |
| SAP nr: | 29650/29652 |
| Package: | 10 l |
Monel, based on natural components, offers a practical protection film and perfect cleaning properties in one product. Monel method: apply Monel film using Monel solution and mop, allow floor to dry.
| Article reference: | 818 |
| SAP nr: | 29643/29641 |
| Package: | 10 l |
| Article reference: | 816 |
| SAP nr: | 75982 |
| Package: | 12*1 l |
| Article reference: | 814 |
| SAP nr: | 75985 |
| Package: | 12*1 l |