Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Static Control & Cleanroom Installation & Floorcare

Forbo offers a wide range of installation, cleaning, and maintenance products via our sister company Forbo Eurocol.
If you have any questions about installation, please Contact us


  • Colorex Installation Guide

    Colorex EC/SD
    Installation guide

  • Colorex Plus Installation Guide

    Colorex Plus
    Installation guide

  • Sphera EC SD Installation

    Sphera EC/SD
    Installation guide

  • Marmoleum Ohmex Installation

    Marmoleum ohmex
    Installation guide

Adhesives & Copper Strip

641 Eurostar Special EL

Very low VOC-emission conductive adhesive with a high initial grab for the installation of conductive carpet, conductive PVC floor covering in sheets and tiles and conductive rubber floor covering in sheets and tiles with a smooth back. Solvent-free, non-flammable, easy and safe to apply, multi-purpose application, high initial adhesion strength, favourable spreading capacity, roller-castor-chair resistant, electrical resistance < 3*105 Ohm (EN 13 415). For optimal conductivity apply with 801 Copper strip.

Suitable for: Colorex SD/EC and Sphera SD/EC

641 Eurostar Special EC Safety Data sheet
641 EUROSTAR SPECIAL EL technical specifications
641 Eurostar Special EL Tvoc emissions test certificate

BasisSuperior acrylic dispersion
Packaging10 litres (12 kg)
Approx. coverageup to 42 m²*
Shelf life12 months, unopened

*Coverage rates will vary depending on the nature and porosity of the substrate.


801 Eurostrip

Self-adhesive copper strip, use when installing a conductive floor covering. Ensures transverse potential equalisation.
801 Eurostrip Technical Specifications

BasisElectrolyte copper strip
DimensionsLength 20 m. Width 10 mm
Thickness0,1 mm

Copper Grounding Strip

Welding Rods

Colorex welding rods

Colorex tiles and all the accessories on this page can be welded with Colorex welding rod, which is available in colours to match the main Colorex tile.

Order Unit:1 pack (2 coils per pack)
Size:1 pce = 4mm diameter x 50lm coil



After installation, Forbo's vinyl floorings can be hot-welded for functional, decorative and/or hygienic reasons. Forbo vinyl welds are available in a variety of colours and are suitable for Sphera SD/EC.

Order Unit:1 pce = 50 lm reel



Finishing solutions for ESD and cleanroom floors

In highly sensitive health care areas, and any other location that has strict hygiene requirements, it’s vital that floor-to-wall transitions are water-tight, perfectly hygienic and aesthetically pleasing. Our integrated coving system creates a perfect seal for these critical areas using the same Colorex material. The system is available in every colour in our collection and consists of the following parts:


Cove skirting strip

The cove skirting, which is available in rolls, is cut and welded from Colorex tile material providing consistent quality from wall to wall. The cove skirting can be formed up the wall over a cove former.
Suitable for:
All Colorex installation

Length:12,2 m.
Height:15 cm

5 cm on the floor plus 10 cm up the wall


Re-formed internal and external corner pieces

The corners are moulded from original Colorex material and reinforced on the reverse with resin to increase the durability. Designed to avoid the need to weld into corners, thereby providing installations that meet the requirements for cleanrooms.

Suitable for:
All Colorex installation

Order unit:1 pce


Special Colorex Plus accessoires:

Colorex Plus access ramp

In applications where Colorex Plus has been installed as a stand alone working island or does not finish at a wall. Access ramps are available in anthracite or colour matched to the main Colorex tile.

Suitable for:
Colorex Plus installations

Order Unit:1 piece
Size:1 pce = 1.22lm x 153mm


Colorex Plus fixed ventilated skirting

When Colorex Plus has been fitted over a damp floor, ventilated skirting allows the humidity to escape into the room.

Suitable for:
Colorex Plus installations

Colorex Plus Ventilated Skirting


Download cleaning & maintenance guide for our ESD & Cleanroom collections

  • Colorex Cleaning & Maintenance

    cleaning & maintenance guide

  • Sphera EC SD Cleaning and Maintenance

    Sphera EC/SD
    cleaning & maintenance guide

Important notice for ESD protected areas (conductive floors)

The use of protective or maintenance coatings such as waxes and polymer dispersions may have a negative effect on conductivity.

Only products designed specifically for conductive floors should be used.


Protect newly laid floors

Did you know as much as 80% of dirt entering a building is brought by foot traffic? Investing in a high quality entrance flooring system such as Forbo’s Coral, an international market leader in textile entrance flooring for almost 50 years!

Coral has been proven to stop up to 95% of dirt and moisture and reduce cleaning times of floor covering by up to 65%!

Coral 2016

General Advice

Note: As with all newly installed floor coverings Marmoleum should be protected from heavy traffic, particularly high point load wheeled traffic, for 72 hours and must not be washed for 48 hours after installation.

Note: Avoid the use of highly alkaline products (pH >10). Products, such as strippers and heavy-duty cleaners, can be harmful to people, to the environment and/or to the finish or even to the flooring itself.

Do not take the risk; safe and good alternatives are available for every necessary action. Forbo FloorCare products all fall within a safe pH-range, for other brands consult the supplier.

Installation & Floorcare videos

Forbo has a wide range of installation and floorcare videos, for more visit ESD & Cleanroom Installation & Floorcare youtube Playlist

Colorex EC/SD
Installation video

Colorex EC Plus
Installation video

ESD & Cleanroom Flooring
Cleaning video

Colorex Basic Plus
Installation video

Repair & restore instruction video