Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2



Dispersion-based surface smoothing for deformable subfloor, ready to use, flexible.

900-europlan dsp.jpg
  • pdf-product-specification.pdf


  • safety data sheet_eurocol_900_europlan_dsp_uk.pdf

    safety data sheet_eurocol_900_europlan_dsp_uk.pdf

Product Typification

Flexible and ready-for-use levelling compound.
Basis : Styrene-butadiene dispersion.
Colour : Off-white.

Product advantages:
  • Ready-to-use, quick-drying, flexible dispersion filler.
  • For thin levelling on deformable substrates, for point-elastic sports floors, sprung floors, wood-based panels and insulating mats.
  • Suitable as a migration inhibitor when laying floor coverings on insulating mats, on thoroughly cleaned, fixed old floor coverings (PVC, CV, elastomer).
  • For closing incompletely glued joints and screw holes in wood-based panels V100/OSB).
  • The product can be used on underfloor heating.
  • Suitable for use with chair castors according to DIN EN 12529.
  • For indoor use.


Consumption : approx 300 - 1200 g/m² depending on the application.
Flammability : Non-flammable.
Frost resistance : No.
Passableness : Approx 2 - 3 hours.*
Special quality : Flexible, especially for flexible substrates.
Specific weight : 1.65 kg/l.



For levelling in layers up to maximum 2 mm of:

  • old vinyl floors.
  • old adhesive residues.
  • differences in height between board materials.
  • old rubber floor covering, which is to be covered with a new floor covering.  

Working Process

Layer thickness : Maximum 2 mm.
Tools : Large-notched adhesive spreader and trowel.
Storage : Store cool and free from frost (5°- 30 °C).
Shelf Life : Approx 12 months, in unopened packaging. After use close the open packaging well.
Drying : Approx 24 hours.*
Cleaner : Water.
Frost-proof : No.
Remarks : 

Technical information and safety data sheets of any laying materials and floor coverings used must be observed!
Only lay floor coverings on insulation underlays that are recommended by the manufacturer as suitable for this purpose.
Please note that the indentation behaviour of floor coverings on insulating underlays is altered.

When welding, observe the changed setting of the adhesives on the non-absorbent filler and extend the drying time accordingly to 2 - 3 days.
Do not use on old textile or needle fleece floor coverings.

Design floor coverings (LVT) or elastomer floorings are not recommended for installation on dispersion filler. It is not possible to install parquet on Eurocol 900 Europlan DSP.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

approx 300 - 1200 g/m² depending on the application.

  • 900 Europlan DSP can be applied on old vinyl or rubber floor covering, which are degreased and checked on a good bonding to the subfloor.
  • Overtoothing on wood-based materials must be adjusted in advance by sanding.
  • In advance always seek our technical data sheets. In doubt about the application ask for technical advice.

User manual:

Before use, temper the product according to the processing conditions.

Stir well and thoroughly before use.

  • First degrease old vinyl or rubber floor covering thoroughly and check on a good bonding to the subfloor.
  • Remove old adhesive residues as much as possible.
  • First apply 900 Europlan DSP with a large-notched adhesive spreader, thereafter smooth the adhesive strips with a trowel.
  • When installing a floor covering on top of the 900 Europlan DSP, "NEVER" use solvent-based adhesives.
  • Vinyl : 540 Eurosafe Special + 640 Eurostar Special + 622 Eurostar Star Tack.
  • Linoleum : 514 Eurosafe Lino  + 611 Eurostar Lino Plus.
  • Carpet : 509 Eurosafe Tex + 609 Eurostar Tex.

Working conditions:
Required surrounding temperature : 18 - 23 °C.
Temperature for material and subfloor : min. 15° - max. 20 ºC.
Relative humidity : 40 - 70%.

Environment and health

LEED : VOC 0 g/l, meets: IEQ Credit 4.1
DGNB : VOC 0 %, quality level: 4
Hazard Class : None.
Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Material residues can be disposed of as household waste.
MSDS : For extensive information about safety and environment we refer to our website
Substances causing allergy : Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction.


ArticleDefinitionPackagingEAN-codeShipping unit
900Europlan DSP 14 kg bucket4 026956 13088844/pallet