SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

eurocol
898 EUROCLEAN LONGLIFE

898

Full area refreshment of old and new floor coverings and parquet. Extremely resistant to footprints, dirt, easy to clean due to the use of metallised binder. 

898 euroclean longlife_2,5 l.jpg
  • pdf-product-specification.pdf

    pdf-product-specification.pdf

  • safety data sheet_eurocol_898-longlife_matt_uk.pdf

    safety data sheet_eurocol_898-longlife_matt_uk.pdf

  • safety data sheet_eurocol_898-gl_uk.pdf

    safety data sheet_eurocol_898-gl_uk.pdf

Product Typification


Basis : Polyacrylic dispersion.
Colour : Milky.
Gloss : Mat, glossy.
Consistency : Thin liquid.

Product advantages:
  • Highly durable maintenance coating.
  • For the initial care and refreshing of parquet and cork floorings sealed by hand with water-based Eurocol products.
  • After careful, professional basic cleaning, it can be used to freshen up used, waterproof floor coverings.
  • Resistant to soiling, paint, footprints.
  • Can be used as a mopping water additive for the maintenance care of parquet and cork flooring sealed with water-based varnish, for PVC, CV and linoleum flooring without special PUR coating.
  • Extends the life of the floor covering / sealing of parquet.
  • Regenerates the existing coating during maintenance care and fills light scratches.
  • Available in glossy and matt.

Performances

Consumption : Initial care: 1 l for approx. 40 m² (undiluted, 1 application)
Maintenance care: 0.5 - 0.7 l for approx. 100 m² (diluted in mopping water)
Curing : Fully set after 12 hrs.
Flammability : Non-flammable.
Frost resistance : No.
Passableness : First careful use after 1 hr.
Special quality : Can be used as refresher and protective sealant.
Specific weight : 1,02 g/cm³

Application

Application:
Care coating for initial care and refreshing of floor coverings and parquet.

Working Process

Storage : Store in a cool and frost-free place (between 5 - 30) ⁰C.
Tools : Wiper.
Mixing ratio : Initial care: undilute, Maintenance care: approx. 150 ml per 5 l of mopping water.
By drying : 1 - 3 hrs.
Shelf Life : 24 months, in unopened packaging.
Cleaner : Water.
Frost-proof : No.
Remarks : Technical information and safety data sheets of other laying materials and floorings/parquet must be observed! Technical notes of other surface finishes or care instructions of floor coverings are to be observed!
Not for the treatment of resilient coverings/parquet with factory PUR coating and parquet or cork floors with UV sealing.
The initial care or maintenance must be carried out before the first full load and, in the case of lacquered surfaces, after the lacquer has completely dried through.
The guaranteed properties, such as soiling behaviour and moisture resistance, are achieved after 12 - 24 hours, depending on the number of applications of the care product. Until then, the surface must be protected from moisture.
For care, follow the corresponding care instructions.
Worn coating can be removed with Eurocol 891 Euroclean Basic (professional cleaning).

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
Initial care: 1 l for approx. 40 m² (undiluted, 1 application)
Maintenance care: 0.5 - 0.7 l for approx. 100 m² (diluted in mopping water)

Substrate:
  • The sealing of parquet and cork floors must be completely closed.
  • Coarse dirt must first be removed by sweeping or vacuuming.


User manual:

Before use, temper the product according to the processing conditions.

  • Shake carefully before use.
  • The material can be applied with a lint-free cloth or weasel.
  • Apply undiluted 1 - 2 times on the lined and freshly sealed or professionally cleaned floor. In the case of highly absorbent and open-pored floors, more coats may be useful to obtain a closed film.
  • Always coat the surface to be treated in one go to avoid build-up.
  • The intermediate drying time is 1 - 3 hours at normal room climate, after that it can be walked on. If heavy loads are expected "overnight", allow to dry for approx. 12 hours.
  • When using as a refresher for worn floors, make sure that old floors are carefully freed from old separating and care product residues (carry out professional basic cleaning). The floor must be left to dry for at least 12 - 24 hours.
    to leave.
  • When used as a maintenance care product, the product can also be added to the wiping water as wiping care. To do this, add approx. 150 ml to 5 litres of water and maintain the floor.

Processing conditions: 

at least 15 °C floor temperature,
at least 18°C material and room temperature,
35-75% relative humidity, recommended <65%.





Environment and health

Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Material residues can be disposed of as household waste.
MSDS : For extensive information about safety and environment we refer to our website www.forbo-eurocol.de.
GISCODE : GE20
LEED : VOC 88,9 - 51,4 g/l (abhängig vom Glanzgrad m/gl)
DGNB : VOC 4,5 - 3,67 %, Qualitätsstufe:/quality level: 3 (abhängig vom Glanzgrad m/gl)
Substances causing allergy : Glossy: Contains 2-methyl-2H-isothiazol-3-one, 1,2-benzisothiazol-3(2H)-one, tetraamminezinc(2+) carbonate. May produce an allergic reaction.
Substances causing allergy : Mat: Contains 2-methyl-2H-isothiazol-3-one, reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1).


Articles

artikelproductnamepackagingshipping unit
898
Euroclean Longlife
PE jerrycan à 2,5 l
8/box
120/pallet

Other types of packaging may be possible.