SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

eurocol
896 EUROCARE OIL

896

Care and refresh oil, long-lasting protection for wooden floors, extends life of parquet sealing, regenerates the existing coating during maintenance care and fills in slight scratches, the oil provides an additional protective film on the wooded surface.

896 eurocare oil_web.jpg
  • pdf-product-specification.pdf

    pdf-product-specification.pdf

  • safety data sheet_eurocol_896_eurocare_oil_uk.pdf

    safety data sheet_eurocol_896_eurocare_oil_uk.pdf

Product Typification


Basis : Refined natural oils, < 5% anionic surfactants, <5% non-ionic surfactants, surfactants from coconut fats, < 5% soap, potash, lead-free drying agents, additives, pot preservative (1,2-Benzisothiazol-3(2H)-one (BIT) / zinc pyrithione.
Colour : Milky.
Consistency : Thick liquid.

Product advantages:
  • Effective care combination for initial care, maintenance cleaning and for refreshing parquet and cork floorings impregnated with oil-based Eurocol products as well as for UV-oiled wood surfaces.
  • Can be used as wiping water additive for maintenance care. 
  • Effective and economical to use, as it is water-dilutable.
  • Prolongs the life of the impregnation of parquet.
  • Regenerates the existing coating during maintenance care and fills light scratches.
  • The oil component provides an additional protective film on the wood surface.

Performances

Consumption : Initial care: dilute approx. 1:1, approx. 2 - 5 ml/ m², if necessary, especially with compacted wood surface, dilute  approx. 1:2 to 1:3
Maintenance care: approx. 250 ml per 5 l of mopping water, sufficient for approx. 100 m² (diluted in wiping water).
Flammability : Non-flammable.
Frost resistance : No.
Passableness : First careful use after 1 hr.
Special quality : Cleaning and care in one step.
Specific weight : 0,98 g/cm³

Application

Application:
Initial care, maintenance cleaning and to refresh oiled wood surfaces.

Working Process

Storage : Store cool and dry in unopened packaging.
Tools : Wiper.
Mixing ratio : Initial care: dilute approx. 1:1, especially with compacted wood approx. 1:2 to 1:3. Maintenance care: approx. 250 ml per 5 l of mopping water.
Shelf Life : 36 months, in unopened packaging.
Cleaner : Water.
Frost-proof : No.
Remarks : Technical information and safety data sheets of other installation materials and parquet must be observed!
Not to be used for the treatment of resilient floorings.
Initial care or maintenance must be carried out before the first full load and after the oil used has completely dried through.
For care, follow the corresponding care instructions.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
Initial care: dilute approx. 1:1, approx. 2 - 5 ml/ m², if necessary, especially with compacted wood surface, dilute  approx. 1:2 to 1:3
Maintenance care: approx. 250 ml per 5 l of mopping water, sufficient for approx. 100 m² (diluted in wiping water).

Substrate:
  • The sealing of parquet and cork floors must be completely closed.
  • Coarse dirt must first be removed by sweeping or vacuuming.


User manual:
  • Mechanically clean/suck the floor before use to remove loose dirt.
  • Temper the product.
  • Shake carefully before use to achieve an even distribution of the oil components.
  • The material can be applied with a lint-free cloth or wiping weasel.
  • Always treat the area to be treated in one go to avoid build-up.
    To care for a new, sufficiently set, tack-free dry oiled surface, apply the material diluted approx. 1:1. Wipe evenly and damply in the longitudinal direction of the wood grain. If the wood surface is very dense, the
    Care products should be diluted approx. 1:2 to 1:3 with water to avoid oil accumulation on the surface.
  • For maintenance care, dilute approx. 250 ml to 5 l water. Use this solution to apply the impregnated wood floor in one direction along the grain.
  • For UV-oiled floors, reduce the quantity of the care product to approx. 150 ml per 5 l of wiping water.
  • If necessary, allow any adhering dirt to "soak" a little and rub off mechanically - remove. Use a lint-free cloth or white pad for this.
  • The drying time is approx. 1 hour in a normal room climate, after that it can be walked on.
    If a slight shine and densification of the surface is desired to reduce soiling, the dry floor can be polished with a white pad.
  • When used as a refresher for worn floors, make sure that there is no open wood on the surface. At these points the floor should be re-impregnated locally with a Eurocol Oil.




Environment and health

Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Material residues can be disposed of as household waste.
GISCODE : GE10
Substances causing allergy : Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.


Articles

artikelproductnamepackagingshipping unit
896
Eurocare Oil
PE jerrycan à 1 l
4/box
552/pallet