Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2



Universal basic cleaner and also suitable for linoleum.

  • pdf-product-specification.pdf


  • safety data sheet_eurocol_891-euroclean-basic_uk.pdf

    safety data sheet_eurocol_891-euroclean-basic_uk.pdf

Product Typification

Basis : Water-soluble tensides.
Colour : Transparent.
Consistency : Thin liquid.

Product advantages:
  • Water-based basic cleaner for basic or intensive cleaning and decoating of suitable, resilient floor coverings (PVC, CV, elastomeric flooring, linoleum, sealed parquet) as part of regular cleaning work and of the C Floor
    renovation system.
  • Removes stains, footprints, soiled wax residues and worn polymer layers on waterproof floor coverings or other smooth surfaces.
  • For the removal of fixation residues from dense surfaces.
  • Can be diluted with water.
  • Request instructions for the different types of floor coverings!


Consumption : depending on degree of dirtiness, approx. 15 - 70 m²/litre.
Flammability : Non-flammable.
Frost resistance : No.
Special quality : pH 8 - 9, suitabel for Linoleum.
Specific weight : 1,00 g/cm³.


Basic cleaner for general or intensive cleaning of water-resistant surfaces.

Working Process

Storage : Store cool and free from frost (5 - 30 °C).
Tools : Wiper, cleaning pads.
Mixing ratio : Approx 1 : 5 with cold water.
By drying : 12 - 24 hrs.
Shelf Life : 36 Months, in unopened packaging.
Cleaner : Water.
Frost-proof : No.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

depending on degree of dirtiness, approx. 15 - 70 m²/litre.

  • Test the colourfastness of the surface/covering in a concealed area before use.
  • The sealing of parquet and cork floors must be completely closed.
  • Coarse dirt must first be removed by sweeping or vacuuming.

User manual:
  • Moisten the floor with clear water.
  • Use 891 Euroclean Basic undiluted or dilute up to 1:5 with cold water, depending on the degree of dirtiness / thickness of the polymeric coating to be removed.
    In case of very old coatings, use undiluted or repeat the cleaning process.
  • Spread the solution on the floor. Use a spray can or mop. Leave on for approx. 10 minutes, but do not let it dry.
  • Loosen stubborn dirt with a brush or suitable pad, immediately remove dissolved dirt with the dirt liquor using a wet hoover or cloth / mop.
  • On stubborn fixation or adhesive residues that are not older than a few days, apply diluted 1:1 or, if necessary, concentrated. In case of old fixation residues, apply several times undiluted or let it work for a longer time, if necessary cover with film overnight.
    Remove the swollen adhesive residues mechanically, if necessary using cleaning machines.
  • Finally, wipe twice with clear, cold water to remove all residues, wipe the floor dry.
  • All thoroughly cleaned surfaces, especially parquet floors / floor coverings, must be re-applied after intensive cleaning.
    The floor must be completely dry before being treated (see care instructions for the floor covering, approx. 12 - 24 hours).

Environment and health

Hazard Class : Product contains hazardous ingredients. Please observe the notes in the Safety data sheet!
Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Material residues can be disposed of as household waste.
MSDS : For extensive information about safety and environment we refer to our website


artikelproductnamepackagingshipping unit
891Euroclean BasicPE jerrycan à 10 l
Euroclean Basic
PE jerrycan à 2,5 l