SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Forbo Websites

Select a division
Forbo Group
Forbo Flooring Systems
Forbo Movement Systems
CONTACT FAQ

eurocol
882 EUROBOND HIGHTACK

882

An exceptionally strong, elastic and versatile construction and/or mounting adhesive with an extremely high initial grab, designed for heavy-duty and instant bonding on virtually all substrates and building materials, without the need for clamps, fixing tape and/or supports. The mounting adhesive is based on hybrid technology, enabling it to cure through exposure to atmospheric moisture. The result is a powerful, permanently flexible rubber-like bond that accommodates shrinkage and expansion movements.Suitable for indoor and outdoor use and industrial spaces. Due to EMICODE EC 1PLUS (very low emissions), it is also suitable for BREEAM projects.

882-eurobond-hightack.jpg
  • 882-safety data sheet uk.pdf

    882-safety data sheet uk.pdf

  • 882-ec 1 plus licence uk.pdf

    882-ec 1 plus licence uk.pdf

  • pdf-product-specification.pdf

    pdf-product-specification.pdf

  • Product Typification
    An exceptionally strong, elastic and versatile construction and/or mounting adhesive with an extremely high initial grab, designed for heavy-duty and instant bonding on virtually all substrates and building materials, without the need for clamps, fixing tape and/or supports. The mounting adhesive is based on hybrid technology, enabling it to cure through exposure to atmospheric moisture. The result is a powerful, permanently flexible rubber-like bond that accommodates shrinkage and expansion movements.Suitable for indoor and outdoor use and industrial spaces. Due to EMICODE EC 1PLUS (very low emissions), it is also suitable for BREEAM projects.
    Basis : Hybrid
    Colour : White.

    Product advantages:
    • EMICODE EC 1PLUS (very low emissions)
    • Very high initial adhesive force approx. 400 kg/m²
    • Durably and permanently elastic, max. movement capacity 20%
    • Suitable for indoor and outdoor use
    • High final strength
    • Good resistance to UV, moisture, weather, water and ageing
    • Not corrosive to metals
    • Tack-free, shrink-free and blister-free-curing hybrid system
    • Very wide range of use
    • Free from isocyanates, solvents and silicone
    • Can be painted over

  • Performances
    Classification : International: ISO 11600 F+G-25 LM and in Germany: DIN 18545-E Joints. GEV-EMICODE EC 1PLUS (very low emissions) tested according to EN 13999-2/4. Suitable for BREEAM projects.
    Consumption :  
    Curing : Minimum 24 hours depending on relative humidity and temperature. High temperatures shorten the drying time, while lower temperatures delay it.
    Elongation at break : According to DIN 53 504: approx. 250%.
    Elongation value 100% : According to DIN 53 504: approx. 1.65 MPa (N/mm²).
    Practical movement capability : ± 25%.
    Shore A-hardness : According to DIN 53 505: 65.
    Shrinkage : No.
    Skin forming time : Approx. 10 min at 23 °C and 55% relative humidity.
    Specific weight : 1.58kg/l.
    Temperature resistance : After complete curing, approx. -40 °C and +100 °C
    Tensile : According to DIN 53 504: approx. 2.90 MPa (N/mm²).
    Strength  : ISO 7390 mm < 2.
    Mechanical values : 2 mm film.
    Shear strength : According to ISO 4587 approx. 2.70 MPa (N/mm²).
  • Application
    For heavy-duty and directly fixed bonding to almost all surfaces and building materials, without the use of adhesive clamps, fixing tape and/or stamps. Suitable for bonding/assembly of: Ceramic tiles, mirrors, natural and hard stone, marble, granite, concrete and other critical and/or porous materials. Also suitable as an assembly and/or construction adhesive for PVC, MDF, wood, metal, panels, skirting boards, profiles, frames, slats, beams, stones, tiles, insulation and sheet materials, etc. Suitable for indoor and outdoor use and industrial spaces.
  • Working Process
    Tools : Professional sealant gun.
    Application temperature : From +5 °C to +40 °C.   
    Curing : Minimum 24 hours depending on relative humidity and temperature. High temperatures shorten the drying time, while lower temperatures delay it.
    Storage : In a cool and dry place in original closed packaging at a temperature between +5° and +25 °C.
    Shelf Life : Maximum 15 months (after production date) in original closed packaging.
    Skinning Time : Approx. 10 min at 23 °C and 55% relative humidity.
    Drying : Hardening after 24 hours at 23 °C and 55% relative humidity and a layer thickness of 3 mm.
    Sensitive to frost : Yes.

    * The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

    Consumption:
     

    Substrate:
    • The surface must have sufficient compressive and tensile strength. The surface must also be dry, free of grease, dirt and dust according to DIN 18 352. An adhesion test before use is recommended.
    • In general, adheres excellently to mirrors, natural and hard stone, marble, granite, concrete, stone and other critical/porous materials, MDF, wood, ceramic tiles, metal, etc. For porous surfaces, apply a dispersion primer such as 049 Europrimer ABS or 099 Dispersion Primer if necessary.
    • Considering the diversity of materials in the market, if you have any doubts about the application, it is recommended to set up a test area in advance or contact our Technical Advice department.
    • Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene or bituminous surfaces. Also not suitable for continuous water loading and joint sealing.
    • In case of doubt about the applications to be used, set up a test area in advance or contact our Technical Advice department.


    User manual:
    • Cut the tube above the thread with the special sealant tube opener or a suitable Stanley knife.
    • Due to the material’s low viscosity, we recommend spraying it using a professional sealant gun combined with the standard V-seam nozzle.
    • Apply 882 Eurobond HighTack in even grooves. Do not apply in dots. For larger surfaces, apply vertically (ventilating) in uniform grooves with spacing between of at least 10 cm and maximum 20 cm. The ideal adhesive thickness is 2-3 mm.
    • Does not stain porous and absorbent materials. Also does not cause edge zone contamination on materials such as natural stone and concrete.
    • After complete curing, it is possible to sand the sealant.
    • After skin formation, this sealant can also be easily painted over with a dispersion paint. If a synthetic paint system is used, it will dry more slowly.
    • Clean uncured material on the surface, tools, hands and skin with 815 EuroClean HandClean. Hardened residues on the surface can only be removed mechanically.
    • The setting speed of the adhesive depends on the surface temperature, ambient temperature and relative humidity. This sealant is based on hybrid technology and hardens due to the humidity in the atmosphere, as well as other factors.

    Environment and health

    • Keep out of the reach of children.
    • Ventilate the room thoroughly during and after the processing and drying process.
    • Do not eat, drink or smoke while processing this product.
    • Avoid contact with eyes and skin and use appropriate means of protection.
    • In case of contact with the eyes, rinse immediately with plenty of water and consult a doctor.
    • Dispose of product residues and cleaning water according to the local environmental regulations and do not pour into drains.
    • The packaging is made from post-consumer recycled (PCR) plastic and is fully recyclable. Only send packaging without residues for recycling. Dried residues of material can be disposed of in household waste.
    • For detailed information on safety measures, please refer to the safety information sheet on our website eurocol.nl.
    • Milieuproductverklaring/Environmental Product Declaration not yet available.
    • Tested for emissions of volatile organic compounds and has passed the EMICODE EC 1PLUS test in accordance with EN 13999-2/4.
    • Meets the criteria of BREEAM-NL HEA 9 Volatile Organic Compounds; promotes healthy and good indoor air quality due to the construction and finishing materials used having low emissions of harmful volatile organic compounds and other hazardous substances. Suitable for BREEAM new construction and renovation.
    • This product contains trimethoxyvinylsilane, N-(3-(trimethoxysilyl)propyl)ethylenediamine. May cause an allergic reaction.




  • Quality and guarantee
  • Environment and health
    MSDS : For extensive information about safety and environment we refer to our website www.eurocol.nl.


  • Articles
    ArticleDefinitionPackagingEAN code
    882Eurobond Hightack 290 ml tube 8 710345 882002
    882Eurobond Hightack12x290 ml in a box