SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

eurocol
2000 BOUWPASTA

2000

Multi-purpose, elastic, ready-for-use tile adhesive.

2000-bouwpasta.jpg
  • 2000-safety data sheet uk.pdf

    2000-safety data sheet uk.pdf

  • dop-declaration-uk.pdf

    dop-declaration-uk.pdf

  • pdf-product-specification.pdf

    pdf-product-specification.pdf

  • 2000-ec 1 plus licence uk.pdf

    2000-ec 1 plus licence uk.pdf

Product Typification

Multi-purpose, elastic, ready-for-use tile adhesive.
Basis : Ready-for-use dispersion adhesive with an acrylic base.
Colour : Yellow/brown.

Product advantages:
  • Very low emission
  • Emicode EC 1PLUS
  • Favourable spreading capacity
  • Moisture-resistant
  • Applicable from 5 °C
  • Elastic
  • High initial adhesion strength 

Performances

Alkali resistance : 2000 Bouwpasta is resistant against an alkaline environment.
Classification : Multi-purpose, elastic dispersion-based tile adhesive, which as far as final bond strength and moisture-resistance complies with D2TE, according to NEN EN 12004.
Colours : Yellow/brown.
Consumption : Approx. 1 kg/m² when installing normal wall tiles on smooth subfloors.
Curing : Minimum 24 hours. For tiles with a moisture-absorption capacity < 3% wait for at least 48 hours. Drying and reaching the final bond strength of the adhesive are entirely depending on temperature, relative humidity, surface and type of tile.
Flammability : Non-flammable.
Humidity resistance : After drying 2000 Bouwpasta is moisture-resistant and therefore very suitable for application in the so-called “wet areas”. The adhesive cannot be used under water (swimming pools).
Specific weight : 1.65 kg/l.

Application

Application:

For fixing:

  • wall tiles
  • tiles with a moisture-absorption capacity < 3%
  • mosaic
  • natural stone
  • building and insulation materials.

NB: Fix light-coloured natural stone and glass-mosaic with 681 Marmercol or 711 Uniflex.

On almost all walls e.g.:

  • cement-based mortar layer
  • plasterboards
  • concrete, cellular concrete
  • gypsum plasterwork, plaster blocks
  • old tiles
  • various sheet materials
  • sand-lime brick elements. 

Working Process

Open time : 20-30 Minutes, depending on temperature, relative humidity, subfloor and type of tile.
Waiting time : None.
Application temperature : From 5° to 25 °C (surrounding and subfloor temperature).
Curing : Minimum 24 hours. For tiles with a moisture-absorption capacity < 3% wait for at least 48 hours. Drying and reaching the final bond strength of the adhesive are entirely depending on temperature, relative humidity, surface and type of tile.
Storage : Store free from frost. Protect against temperatures > 35 ºC.
Shelf Life : 12 Months, in unopened packaging. After use close the open packaging well.
Moisture resistance : After drying 2000 Bouwpasta is moisture-resistant and therefore very suitable for application in the so-called “wet areas”. The adhesive cannot be used under water (swimming pools).

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
Approx. 1 kg/m² when installing normal wall tiles on smooth subfloors.

Substrate:
  • 2000 Bouwpasta is suitable for almost all walls, which are clean, free from dust and grease, smooth and dry, according to the requirements of DIN 18 352.
  • If necessary level stony walls with 658 Wandoforte or 955 Wandostuc.
  • Apply 099 Dispersion Primer on all moisture-absorbent walls.
  • Affix non-absorbent subfloors e.g. old tiles with tile adhesive or prime with 051 Europrimer Quartz. 
  • In accordance with the manufacturers recommendations gypsum plasterwork has to be at least 10 mm thick.
  • For bonding of the adhesive, either the tile and/or subfloor should be able to absorb moisture.
  • The subfloor should be suitable for the required application.
  • In advance always seek our technical data sheets. In doubt about the application ask for technical advice.


User manual:
  • Apply the adhesive on the wall and make adhesive strips with the recommended adhesive spreader (see spreading capacity/notched spreader).
  • Place the tiles immediately with a shuffling movement into the adhesive. On impervious subfloors wait for max. 10 - 15 minutes to allow the adhesive to set-off before placing the tiles.
  • After drying of the adhesive (at least 24 hours) the joints can be filled with Eurocol grouting cement.
  • Clean tools and hands immediately with water. 

Spreading capacity/notched spreader for ready-for-use tile adhesives:

The smoothness of the subfloor and type of tile are determining for the adhesive spreader to be used. For walls inside a minimum adhesive transport of 60% is required (divided over the back of the tile).

Notched spreader no. 18                 : Spreading capacity approx. 1.3 kg/m² 
Notched spreader no. 19, 4 x 4 mm : Spreading capacity approx. 1.8 kg/m²
Notched spreader no. 12, 6x6 mm   : Spreading capacity approx. 2.5 kg/m²

Contains methylchloroisothiazolinone and  methylisothiazolinone (3:1). May produce an allergic reaction.





Quality and guarantee

Environment and health

Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155.
MSDS : For extensive information about safety and environment we refer to our website www.eurocol.nl.





Articles

ArticleDefinitionPackagingEAN-code
2000Bouwpasta   18 kg Bucket8 710345 200189
2000Bouwpasta8 kg Bucket8 710345 009720