SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

eurocol
530 EUROSAFE CORK

530

Wall and floor covering adhesive with a high initial grab.

530-eurosafe-cork.jpg
  • pdf-product-specification.pdf

    pdf-product-specification.pdf

  • epdfeica- 530 eurosafe cork-uk.pdf

    epdfeica- 530 eurosafe cork-uk.pdf

  • 530-ec 1 plus licence uk.pdf

    530-ec 1 plus licence uk.pdf

  • 530-safety data sheet uk.pdf

    530-safety data sheet uk.pdf

Product Typification

Wall and floor covering adhesive with a high initial grab.
Basis : Sulphite lye and fillers dispersed in water.
Colour : Brown.
Consistency : Thick liquid.

Product advantages:
  • Very low emission  
  • Emicode EC 1PLUS
  • Non-flammable
  • Easy and safe to apply
  • High initial adhesion strength 

Performances

Consumption : 550 - 650 g/m².
Curing : 24 hours.*
Flammability : Non-flammable.
Humidity resistance : When dry 530 Eurosafe Cork is not moisture-resistant.
Specific weight : 1.66 kg/l.

Application

Application:

For installing on permanently dry subfloors of:

  • linoleum
  • carpet
  • wall carpet
  • cork wall and floor tiles
  • bulletin board. 

Working Process

Tools : Eurocol spreader no. 850/B1.
Open time : 10-15 minutes.*
Waiting time : None.
Curing : 24 hours.*
Storage : Store cool and free from frost.
Shelf Life : 12 months, in unopened packaging.
Moisture resistance : When dry 530 Eurosafe Cork is not moisture-resistant.
Cleaner : Water.
Sensitive to frost : Yes.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
550 - 650 g/m².

Substrate:
  • 530 Eurosafe Cork is suitable for any type of subfloor that has a good tensile and compression strength. The subfloor should also be even, clean, permanently dry and free from grease and dirt, according to the requirements of BS 8203 or DIN 18 365.
  • Only use pervious floor coverings on impervious subfloors.
  • When installing impervious floor coverings on impervious subfloors apply a 2 mm levelling compound layer.
  • In advance always seek our technical data sheets. In doubt about the application ask for technical advice.


User manual:
  • Apply the adhesive with a regular notched adhesive spreader (Eurocol spreader no. 850/B1).
  • Place the material directly into the wet adhesive and roll and/or press thoroughly.
  • Remove fresh adhesive spots immediately with water.

Working conditions:
Required surrounding temperature : 18 - 23 °C.
Temperature for material and subfloor : min. 15° - max. 20 ºC.
Relative humidity : 40 - 80%.

Contains methylchloroisothiazolinone and methylisothiazolinone (3:1) and benzisothiazolinone. May produce an allergic reaction.





Quality and guarantee

Environment and health

Hazard Class : None.
Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Bound material residues can be disposed of as household waste.
MSDS : For extensive information about safety and environment we refer to our website www.eurocol.nl.


Articles

ArticleDefinitionPackagingEAN-code
530Eurosafe Cork13.5 kg Bucket 8 710345 483506