153 Eurowood LE
One-component SMP parquet adhesive | long installation time | high suction adhesion | multipurpose
Elastic, ISO 17178 compliant, water- and solvent-free parquet adhesive based on SMP. Hardens without shrinking. For installation of strip parquet, mosaic parquet elements*, multi-layer and solid parquet, lamparket products* width to thickness ratio of less than 5:1, and permitted solid floor boards >= 15 mm thickness (thickness ratio of less than 1:7), for edge lamella parquet with a minimum thickness of 16 mm.
Also suitable for the wood species bamboo, smoked oak and especially for surface-treated parquet.
Bonding is carried out on standard cementitious and calcium sulphate-bound screeds, on suitable mineral-based subfloors and on wooden composites which meet the requirements for parquet installation, fully sanded mastic asphalt, gypsum-boards suitable for installation of parquet and on Eurocol insulation mats (e.g. 823 Eurofloor Reno, 820/821 Eurofloor comfort, 804 Eurofloor Reno Fleece).
Also usable on non-absorbent surfaces (e.g. fixed and cleaned ceramic and natural stone tiles, artificial stone, metals).
For high step-sound improvement. Usually no primer necessary. Easy to remove from varnished surfaces. Sanding and sealing after 24 - 48 hrs. The adhesive is characterized by a long installation time. A swimming of the parquet elements is greatly reduced by the high suction adhesion.
Cleaner for non-hardened materials: 815 Euroclean Handclean. Subfloor surface improvement, DPM of residual moisture: 021 Euroblock Reno LE, 042 Euroblock Turbo. Quartz sand blinding is recommended.
For indoor use only.
Very low VOC emission. EMICODE EC 1 Plus R, GISCODE RS 10