C FLOOR
There are millions of square meters of worn floors waiting for being renovated or renewed. If there is no option for replacement, C FLOOR might be the solution.
Video image c floor

Forbo is mainly know as a manufacturer of high-quality floor covering. Forbo Eurocol has now used the know-how from Forbo to create a safe and reliable product for the professional repairing of worn surface covering with C Floor. C Floor stands for a system of clean and care products that can be used to extend the lifecycle of a floor covering.
The most important features and advantages from C FLOOR are:
- At least 50 % less time consuming as for the installation of new floor covering
- No unnecessary waste from the disposal of the old floor coverings as well as the preparation of the subfloor.
- Reduced dust and noise generation.
C Floor stand as well for professional technical advice and support as well as the assurance of high quality standards in the application through carefully selected and trained C Floor specialist companies.
Brochure C Floor_2017
Project C FLOOR_Ljubljana
C Floor System is the ultimate solution for sustainable extension of the life cycle of resilient floor coverings.
Economic & ecologic advantages
- Long durability
- Minimal downtimes
- Partial area refurbishment is possible
- High cost saving in comparison with new Installation and disposal
- Significant increase of the floor covering’s lifetime
- Reduces consumption of maintenance agents after resealing
- Using of water-based low emission Top lacquers ECR1+
- Reduced dust and noise generation
- High mechanical resistance
- High chemical resistance
- Slip resistant rate
- Partial area refurbishment possible
With the high end top lacquer 322 C Floor transparent or with 321 C Floor Color Duo, with or without flakes is the floor not only again almost new but also perfectly and highly protected against chemicals.
For this purpose, has Forbo Eurocol developed special grinding and cleaning techniques adepted tot he different types of floor coverings.
C Floor Products
Following the trend of natural surface refinement, C Floor together with the product 322 Eurofinish Duo, offers a high-matt high-end top coat with an extremely high degree of cross-linking after curing. The matting effect is unusual and new to the market, it does not happen by adding high fractions of matting agents as they tend to settle sooner or later. Matting agents are as well difficult to stir homogeneously.
Forbo Eurocol has found another method to achieve the matting effect. The great long-term advantage of the method chosen by Forbo is that the cured lacquer layer is permanently matt. Thus, the formation of “walking roads” is virtually impossible, even under the most severe load.
C Floor sealed surfaces are not only highly cross-linked, they also form a high early strength. This ensures that the C floor floors are not only finished quickly but also can be used within a short time.
Residual impression behavious
DIN ISO 24343 for elastic floors
Flexibility EN ISO 24344: 2012 procedure A
Color fastness to artificial light ISO 105-B02:1994
Abrasion resistance according to falling sand method acc. EN 15468:2013 with Taber abrader
Scratch resistance acc. EN 14565:2004 appendix A
Sensistivity to stains (chemical resistance) EN ISO 26987: 2012
Meets slip resistance rate R9 (Pendel test) DIN 51130 2004:2006
Outstanding good results in castor wheel resistance testing DIN ISO 4918:2009
It is interesting to point out the high resistance of the 322 Eurofinish DUO against cleaning agents, such as those used in hospitals.
With special grinding and cleaning techniques developed by Forbo Eurocol, you get an optimal basic cleaning for different floor coverings and different floor coverings.
C Floor together with the product 322 Eurofinish C Floor Duo, offers a high-matt high-end top coat, with an extremely high degree of cross-linking after curing. C Floor sealed surfaces are not only highly cross-linked, they also form a high early strength.
This ensures that the C floor floors are not only finished quickly but also can be used within a short time.
Video Application
STEPS FOR CLEANING AND STRIPPING PVC / RUBBER
STEPS FOR CLEANING AND STRIPPING LINOLEUM
STEPS FOR COATING
For the full-surface coloring of floor covering that are not transparent anymore. Also suitable for the application of partial surface markeings.
321 C FLOOR color duo is available in all RAL colors.
Flake spreading is possible in selected color combinations.
After sealing the floor treated with Eurocol C Floor, initial care can be carried out. The initial curing protects the sufficiently cured coating against soiling and prepared it for maintenance cleaning. An initial be done earliest 7 days after the Eurocol C floor has been done.
The universal care Eurocol 328 C floor care is to be used for initial care.
Maintenance instructions