Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Fast flooring

Fast flooring

The Future of Installation

A collection of genuinely adhesive free products, the Forbo Fast Flooring collection includes interior flooring and entrance products in tile, plank and sheet format for total flexibility. Fast Flooring products are super quick to install and are reusable.

Quick – many of the products can be fitted over current floors and, as they don’t have to be fitted with adhesive, they can reduce installation time by more than 50%

  • Fast flooring
  • Fast flooring
  • Fast flooring
  • Fast flooring
  • Sarlon | Modul'up 9406 coral terrazzo | 659 mercury slabstone
    General Applications

    General Applications

    Offering adhesive free flooring options in sheet and tile formats, our Fast Flooring solutions for general application areas can be installed over the majority of existing floor coverings, removing the need for time-consuming and expensive removal and subfloor preparation.

  • Surestep Fast Fit
    Specialist Applications

    Specialist Applications

    As part of our Fast Flooring portfolio, we offer a range of solutions designed to cater for applications that have specific performance requirements, from installation over raised access panels in office buildings to issues with damp subfloors.

  • Allura Puzzle installation image
    Heavy Duty & Damaged Subfloors

    Heavy Duty Applications

    With our heavy duty Fast Flooring solutions, even cracked or damaged subfloors can be overcome, allowing for an adhesive free floor covering to be installed. With their tile format and secure dovetail locking system, the solutions in this collection are suitable for use in even the most intense of traffic areas.

About Fast Fit Flooring

Install and walk on the same day!

The future of flooring installation has arrived and it’s fast and adhesive free! Forbo’s family of Fast Flooring solutions are adhesive free floor coverings, which are quick and easy to install whilst also being sustainable due to their reusable and/or recyclable nature.

• Quick turnaround with minimal disruption
• No noise, odours or unnecessary closure of areas
• Floors can be walked on immediately
• Easy to remove and replace, without subfloor damage
• Available in a large choice of formats, designs and adhesive free installation methods

Developed as a portfolio to help overcome various commercial project challenges, from problematic subfloors to demanding project timescales, Forbo’s Fast Flooring offer is designed to help you choose which product is right for you and your project requirements.

Fast flooring logo

Where to use Fast Fit products?

Where to use Fast Fit products?

Coral ClickEntrance tileClean, smooth or existing finishesNo metal for store detector
Modul'up concreteGeneral sheetClean, smooth or existing finishesExcellent indentation resistance
Modul’up 19 dBGeneral sheetMild undulations*19 dB impact sound reduction
Surestep Fast FitDamp subfloor and slip sheetDamp up to 97% RH*13 dB (Original) & 14 dB (Wood/Material) impact sound reduction
Modul’up T.E.Damp subfloor sheetDamp up to 97% RH*All in one solution for damp subfloors
Allura PuzzleHeavy Duty tileCracked & damaged*Intense traffic areas
Colorex Plus BasicAnti-static tileCracked & damaged*Intense traffic areas
Colorex Plus ECConductive tileCracked & damaged*Intense traffic areas

Image of Surestep Fast Fit installed over a variety of subfloors

End User Benefits

Reduce Downtime!

• Minimal disruption and downtime as a Fast Flooring installation can save over 50% of downtime if a new sub-floor is not needed
• No need to apply adhesive so quicker for the contractor to install
• No adhesive setting or drying times so quicker installation
• Floor is ready for immediate use after installation, no need to wait 48 hours before using with heavy traffic

• None of the usual adhesive constraints such as drying times and lingering odours
• Less dust, mess and a reduced environmental impact as no adhesive
• No adhesive so no possibility of adhesive failure giving you peace of mind
• Easy to remove, reuse or recycle at end of life as no adhesive residue on back of the material. Subfloor is left clean and sound for repeat installation
• If there is no need for a new subfloor, it means there are no ‘wet trades’ on site
• Proven system with over 1 million m² installed of some Fast Flooring products such as Modul’up

• A Fast Flooring installation can reduce downtime by over 50% if a new sub-floor is not needed, thereby saving you significant money
• No adhesive so floors can be reused in other areas of a building or in temporary installations eg pop-ups, exhibitions
• Potential savings on future renovations as no costly subfloor preparation is required on removal

Allura Puzzle



If you would like to read more about our Fast Fit collection, please download the following brochure(s):

Fast Fit brochure

If you would like to read more about Forbo's portfolio of products please download one of the following brochure(s):

Forbo Portfolio

Forbo document icon


Sustainability & Circularity

Eliminating the use of adhesive means, that at the end of their service life, adhesive free floor coverings can be easily removed, and many are immediately ready for recycling via our Back to the Floor scheme. The ease of removal also allows the flooring to be reused if needed, reducing waste further. And with no adhesive used, the substrate remains clean meaning the flooring can be replaced without time consuming and expensive subfloor preparation.

All of Forbo’s Fast Flooring solutions are produced in Europe using 100% renewable electricity, and in facilities that are certified to ISO14001. They are also all phthalate-free for healthier indoor environments and many are available in natural stress-reducing designs, with high LRVs (Light Reflectance Values) and are dementia friendly.

To find out more about Forbo's commitment to the environment and sustainable, circular manufacturing,VISIT OUR SUSTAINABILITY INFORMATION HUB


Contractor Benefits

Stress Free, Hassle Free, Adhesive Free.

To download a leaflet showing the benefits of Fast Fit to a contractor click here

• No specific subfloor preparation needed in many cases
• No need to apply adhesive so installation time reduced allowing you time to do additional projects

• No need to use heavy rollers on site - just standard installation tools
• No need to worry if adhesive has been applied correctly, giving peace of mind to you and your client
• No need to worry if anyone will be impacted by odours from adhesive
• Easy to replace a Fast Fit product as it’s not adhered, and sub floor is left clean and sound for repeat installation

• Reduced installation time means you can quote for more jobs, which is particularly useful in the summer when schools refurbishment work is extensive
• Reduced installation time can mean that some installation projects can be competed over a weekend helping you win business from busy clients who want to avoid downtime

Modul'up tape removal