• Trwała lepkość (klei do 48h)
• Łatwość aplikacji tażke wałkiem
• Odporność na wysokie temperatury
• Niskie zużycie (150g/mkw)
  
• Najwyższa siła klejnia 
• System EKO

• 543 Eurosafe Deco is suitable for any type of subfloor that has good tensile and compression strength. The subfloor should also be even, clean, permanently dry and free from grease and dirt according to the requirements of BS 8203 or DIN 18 365.
• Anhydrite floors should be sandpapered. Thereafter make the floor dust free and prime with 044 Europrimer Multi. This layer has to dry sufficiently.
• For an optimal final result, apply a 2 mm levelling compound layer on the subfloor.
• In advance always seek our technical data sheets. In doubt about the application ask for technical advice.

• It is very important to acclimatize the PVC-material for at least 48 hours in the room where it will be installed.
• Apply the 543 Eurosafe Deco with a Fur roller and/or brush.
• The sheets, strips or tiles can be placed directly into the wet, semi moist or dry adhesive.
• Drying time is depending on temperature, relative humidity and the porosity of the subfloor.
• After applying carefully roll and firmly rub the strips or tiles in to the adhesive line.
• Drying time minimal 24 hours.
• Remove fresh adhesive spots immediately with a clean damp cloth.

Working conditions:
Required surrounding temperature : 18 - 23 ºC
Temperature for material and subfloor : min. 15º - max. 20 ºC.
Relative humidity : 40-80%.