Seal & Primers
Solvent-free damp proof membrane for suppressing residual construction moisture in sand/cement screeds. Solvent-free, easy application, favourable spreading capacity, non-flammable, fast drying.
| Article reference: | 026 |
| SAP nr: | 35355 |
| Package: | 10 l. (12.4 kg) |
| Spreading capacity: | First coat (diluted 1:1 with water) approx. 50 g/m². |
| Second and third coat (undiluted) 50-75 g/m² per coat. |
Universal primer to improve the adhesion of levelling compounds onto all types of absorbent and non-absorbent subfloors.
Universal application, very low VOC-emission, emicode EC1, favourable spreading capacity.
| Article reference: | 044 |
| SAP nr: | 36689 |
| Package: | 10 l. (10.1 kg) |
| Spreading capacity: | 100-200 g/m², depending on the application. |
Primer to improve the adhesion of levelling compounds on absorbent, stony subfloors. For improving the top-layer of absorbent, stony subfloors. User friendly, non-flammable, favourable spreading capacity, high penetration capacity. Suitable for any type of subfloor that is sound, clean and permanently dry.
| Article reference: | 049 |
| SAP nr: | 34956 |
| Package: | 10 l. (10kg) |
| Spreading capacity: | 100-150 g/m², depending on the application. |
Primer for reducing the need of using copper strip when installing a conductive floor. Solvent-free, non-flammable, favourable spreading capacity, electrical resistance < 105 Ohm, measured in accordance with DIN 53 276.
| Article reference: | 041 |
| SAP nr: | 37123 |
| Package: | 10 l. (10.1 kg) |
| Spreading capacity: | 6-8 m²/litre |
Subfloor levelling
Self-smoothing levelling compound for levelling of cement-based and other stony floors in layers up to maximum 8 mm which are to be covered with a floor covering. Roller-castor-chair resistant from 2 mm. Less dust. Very low VOC-emission, emicode EC1, self-smoothing, high flow, maximum layer thickness of 8 mm.
| Article reference: | 975 |
| SAP nr: | 31994 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.5 kg/m² per mm layer thickness. |
Dust-reduced, self-smoothing very high quality levelling compound for levelling of cement-based and other stony floors in layers op to maximum 20 mm which are to be covered with a floor covering. In most cases a primer is not necessary. Roller-castor-chair resistant from 1 mm. Up till 90% less dust. Self-smoothing, low-tension, excellent flow, pumpable, high compression strength, maximum layer thickness of 20 mm, less dust, very low VOC-emission, emicode EC1, suitable for use under parquet floors.
| Article reference: | 990 |
| SAP nr: | 34953 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.4 kg/m² per mm layer thickness. |
Self-smoothing, very high quality fast drying levelling compound. Suitable for levelling of cement-based and other stony floors in layers up to maximum 20 mm. At 20° C and a relative humidity of < 70%, the levelling compound layer is ready for the installation of linoleum, needlefelt, carpet and PVC floor covering, after 3-4 hours. Roller-castor-chair resistant from 1 mm. Very low VOC-emission, emicode EC 1, fast drying, low-tension, excellent flow, high compression strength, maximum layer thickness of 20 mm, roller-castor-chair resistant from 1 mm. Less dust.
| Article reference: | 991 |
| SAP nr: | 29603 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.5 kg/m² per mm layer thickness. |
The Forbo Quickfit system comprises self-adhering MDF panels and damp-proof sound insulating Forbo foam. Forbo Quickfit offers: A rapid, smooth finish. Quick and easy installation. No visible subfloor seams. Excellent moisture barrier. Easily removable. Improved impact sound insulation in combination with Forbo Foam (Δ Lw= 23 dB according to NEN-EN-ISO 140-8 and 717-2).
| SAP nr: | 60696 |
| Spreading capacity: | 3.6 m² per pack, 36 m² per pallet |
Polypropylene foam laminated with metallised polypropylene foil. The foil top layer incorporates a self-adhesive overlap of 20 cm for secure seams.
| SAP nr: | 64799 |
| Package: | Roll of 25 linear metres PE foam, 100 cm wide, 4.5 mm thick. |
Adhesives
Solvent-free floor covering adhesive with a high initial grab for the installation of PVC floor covering in sheets and tiles, cushion vinyl, PVC backed carpet, rubber floor covering in sheets and tiles with a smooth back and polyolefin floor covering. Solvent-free, non-flammable, easy and safe to apply, high initial adhesion strength and final bond strength, favourable spreading capacity, roller-castor-chair resistant.
| Article reference: | 540 |
| SAP nr: | 29403 |
| Package: | 10 l. (13 kg) |
| Spreading capacity: | 0-350 g/m², depending on the back of the floor covering |
| and condition of the subfloor. |
awdaasVery low VOC-emission floor covering adhesive with a high initial grab for the installation of PVC floor covering in sheets and tiles, cushion vinyl, PVC backed carpet, rubber floor covering in sheets and tiles with a smooth back and polyolefin floor covering. Very low VOC-emission, emicode EC1, solvent-free, multi-purpose application, easy and safe to apply, favourable spreading capacity, high initial and final bond strength, roller-castor-chair resistant.
| Article reference: | 640 |
| SAP nr: | 29611 |
| Package: | 10 l. (12 kg) |
| Spreading capacity: | 225-275 g/m² |
Very low VOC-emission conductive adhesive with a high initial grab for the installation of conductive carpet, conductive PVC floor covering in sheets and tiles and conductive rubber floor covering in sheets and tiles with a smooth back. Very low VOC-emission, emicode EC1, solvent-free, non-flammable, easy and safe to apply, multi-purpose application, high initial adhesion strength, favourable spreading capacity, roller-castor-chair resistant, electrical resistance < 3*105 Ohm (EN 13 415).
| Article reference: | 641 |
| SAP nr: | 53652 |
| Package: | 10 l. (12 kg) |
| Spreading capacity: | TKB S1: 260-300 g/m² |
| B2: 300-400 g/m² |
High quality solvent-free adhesive for the installation of PVC strips and tiles on smooth subfloors. Non-flammable, solvent-free, roller-castor-chair resistant, favourable spreading capacity, no grin through of adhesive trowel marks, easy and safe to apply, high final bond strength.
| Article reference: | 543 |
| Package: | 10 kg bucket |
| Spreading capacity: | 100-150 g/m², on levelled subfloors. |
Low VOC-emission, solvent-free, powerful dispersion-based contact adhesive with a strong adhesion for the two-sided fixing of carpet on stairs, PVC nosing, PVC adhesive skirting, rubber nosing, hollow skirting of hard floor covering and cork floor covering. Low VOC-emission, emicode EC2, solvent-free, powerful enough to bear high tensions, high initial adhesion strength, reactivate through warmth, tool included.
| Article reference: | 650 |
| SAP nr: | 77554 |
| Package: | 5 l. (7.5 kg) |
| Spreading capacity: | 250 g/m² per coat |
Welding Rods
Colorex tiles and all the accessories on this page can be welded with Colorex welding rod, which is available in colours to match the main Colorex tile.
In standard 4 mm diameter and 100 m coils
In highly sensitive health care areas, and any other location that has strict hygiene requirements, it’s vital that floor-to-wall transitions are water-tight, perfectly hygienic and aesthetically pleasing. Our integrated coving system creates a perfect seal for these critical areas using the same Colorex material. The system is available in every colour in our collection and consists of the following parts:
The cove skirting, which is available in rolls, is cut and welded from the original Colorex tiles assuring quality from wall to wall. The cove skirting can be formed up the wall by the use of a cove fromer and underlying profile which ensures a smooth transition between wall and floor and avoids right angle joints which may trap dirt.
| Length: | 12,2 m. |
| Height: | 15 cm |
| 5 cm on the floor plus 10 cm up the wall |
The corners are moulded from original Colorex material and reinforced to assure the best possible result and making sure the most critical parts are manufactured in a controlled environment. Welding is not required. Including resin reinforcement on the back.
| Radius: | 20 mm |
Colorex tiles and all the accessories on this page can be welded with Colorex welding rod, which is available in colours to match the main Colorex tile.
In standard 4 mm diameter and 100 m coils
| Diameter: | 4 mm |
| Coil: | 100 m |
Special Colorex Plus accessoires:
In applications where Colorex Plus has been installed as a stand alone working island or does not finish at a wall, acces ramps are available in grey or colour matched to the main Colorex tile (Signal colours on request).
There are two types of skirtings available for the various versions of Colorex Plus, each is designed to address a different solution. In hygiene critical areas, the proposed solution is similar to that used with 2 mm Colorex tiles with tailor made coved skirting which should be fitted by a skielled and trained installler. If Colorex Plus has been fitted over a damp floor, we can provide a ventilated skirting that allows the humidity to escape into the room.
| Radius: | 20 mm |
Forbo Flooring is aware that the majority of the costs incurred during the lifetime of a durable floor is coming from its care and maintenance. This is why our Colorex flooring products have always been developed with a special attention to easy and environment friendly cleaning methods and consistent appearance retention properties. This will allow you to renounce completely on labour and cost intensive maintenance coatings, floor finishes and alike.
The use of protective or maintenance coatings such as waxes and polymer dispersions may have a negative effect on conductivity. Only products designed specifically for conductive floors should be used.
Floorcare Products
Cleaner is a pH neutral detergent, which leaves no residue and settles practically all common stains and soiling. Clean with Cleaner or Monel and mop: pick up dirty water with wiper and mop or water vac, rinse with clean water and mop, allow floor to dry.
| Article reference: | 816 |
| SAP nr: | 29650/29652 |
| Package: | 10 l |
Spray has a perfect performance for local spray cleaning. ForboSpray also will refurbish local small distortions such as scratches and has excellent buffing properties, thus restoring the desired visual behaviour of the flooring. Spray method: dry buff with rotary machine and buffing pad, full spray with Spray, rotary machine and buffing pad.
| Article reference: | 810 |
| Package: | 10 l |
| Article reference: | 811 |
| SAP nr: | 29624/29626 |
| Package: | 6* 0.5 l |
Monel, based on natural components, offers a practical protection film and perfect cleaning properties in one product. Monel method: apply Monel film using Monel solution and mop, allow floor to dry.
| Article reference: | 818 |
| SAP nr: | 29643/29641 |
| Package: | 10 l |
Weldfinish protects welding rods from initial soiling. During installation and/ or after the final trimming of the rod, Weldfinish can be easily applied with the Weldfinish applicator.
| Article reference: | 616 |
| SAP nr: | 66297 |
| Package: | 10 l |
| Article reference: | 816 |
| SAP nr: | 75982 |
| Package: | 12*1 l |
| Article reference: | 814 |
| SAP nr: | 75985 |
| Package: | 12*1 l |
Seal & Primers
Solvent-free damp proof membrane for suppressing residual construction moisture in sand/cement screeds. Solvent-free, easy application, favourable spreading capacity, non-flammable, fast drying.
| Article reference: | 026 |
| SAP nr: | 35355 |
| Package: | 10 l. (12.4 kg) |
| Spreading capacity: | First coat (diluted 1:1 with water) approx. 50 g/m². |
| Second and third coat (undiluted) 50-75 g/m² per coat. |
Universal primer to improve the adhesion of levelling compounds onto all types of absorbent and non-absorbent subfloors.
Universal application, very low VOC-emission, emicode EC1, favourable spreading capacity.
| Article reference: | 044 |
| SAP nr: | 36689 |
| Package: | 10 l. (10.1 kg) |
| Spreading capacity: | 100-200 g/m², depending on the application. |
Primer to improve the adhesion of levelling compounds on absorbent, stony subfloors. For improving the top-layer of absorbent, stony subfloors. User friendly, non-flammable, favourable spreading capacity, high penetration capacity. Suitable for any type of subfloor that is sound, clean and permanently dry.
| Article reference: | 049 |
| SAP nr: | 34956 |
| Package: | 10 l. (10kg) |
| Spreading capacity: | 100-150 g/m², depending on the application. |
Primer for reducing the need of using copper strip when installing a conductive floor. Solvent-free, non-flammable, favourable spreading capacity, electrical resistance < 105 Ohm, measured in accordance with DIN 53 276.
| Article reference: | 041 |
| SAP nr: | 37123 |
| Package: | 10 l. (10.1 kg) |
| Spreading capacity: | 6-8 m²/litre |
Subfloor levelling
Self-smoothing levelling compound for levelling of cement-based and other stony floors in layers up to maximum 8 mm which are to be covered with a floor covering. Roller-castor-chair resistant from 2 mm. Less dust. Very low VOC-emission, emicode EC1, self-smoothing, high flow, maximum layer thickness of 8 mm.
| Article reference: | 975 |
| SAP nr: | 31994 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.5 kg/m² per mm layer thickness. |
Dust-reduced, self-smoothing very high quality levelling compound for levelling of cement-based and other stony floors in layers op to maximum 20 mm which are to be covered with a floor covering. In most cases a primer is not necessary. Roller-castor-chair resistant from 1 mm. Up till 90% less dust. Self-smoothing, low-tension, excellent flow, pumpable, high compression strength, maximum layer thickness of 20 mm, less dust, very low VOC-emission, emicode EC1, suitable for use under parquet floors.
| Article reference: | 990 |
| SAP nr: | 34953 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.4 kg/m² per mm layer thickness. |
Self-smoothing, very high quality fast drying levelling compound. Suitable for levelling of cement-based and other stony floors in layers up to maximum 20 mm. At 20° C and a relative humidity of < 70%, the levelling compound layer is ready for the installation of linoleum, needlefelt, carpet and PVC floor covering, after 3-4 hours. Roller-castor-chair resistant from 1 mm. Very low VOC-emission, emicode EC 1, fast drying, low-tension, excellent flow, high compression strength, maximum layer thickness of 20 mm, roller-castor-chair resistant from 1 mm. Less dust.
| Article reference: | 991 |
| SAP nr: | 29603 |
| Package: | 23 kg |
| Spreading capacity: | Approx. 1.5 kg/m² per mm layer thickness. |
The Forbo Quickfit system comprises self-adhering MDF panels and damp-proof sound insulating Forbo foam. Forbo Quickfit offers: A rapid, smooth finish. Quick and easy installation. No visible subfloor seams. Excellent moisture barrier. Easily removable. Improved impact sound insulation in combination with Forbo Foam (Δ Lw= 23 dB according to NEN-EN-ISO 140-8 and 717-2).
| SAP nr: | 60696 |
| Spreading capacity: | 3.6 m² per pack, 36 m² per pallet |
Polypropylene foam laminated with metallised polypropylene foil. The foil top layer incorporates a self-adhesive overlap of 20 cm for secure seams.
| SAP nr: | 64799 |
| Package: | Roll of 25 linear metres PE foam, 100 cm wide, 4.5 mm thick. |
Adhesives
Solvent-free floor covering adhesive with a high initial grab for the installation of PVC floor covering in sheets and tiles, cushion vinyl, PVC backed carpet, rubber floor covering in sheets and tiles with a smooth back and polyolefin floor covering. Solvent-free, non-flammable, easy and safe to apply, high initial adhesion strength and final bond strength, favourable spreading capacity, roller-castor-chair resistant.
| Article reference: | 540 |
| SAP nr: | 29403 |
| Package: | 10 l. (13 kg) |
| Spreading capacity: | 0-350 g/m², depending on the back of the floor covering |
| and condition of the subfloor. |
awdaasVery low VOC-emission floor covering adhesive with a high initial grab for the installation of PVC floor covering in sheets and tiles, cushion vinyl, PVC backed carpet, rubber floor covering in sheets and tiles with a smooth back and polyolefin floor covering. Very low VOC-emission, emicode EC1, solvent-free, multi-purpose application, easy and safe to apply, favourable spreading capacity, high initial and final bond strength, roller-castor-chair resistant.
| Article reference: | 640 |
| SAP nr: | 29611 |
| Package: | 10 l. (12 kg) |
| Spreading capacity: | 225-275 g/m² |
Very low VOC-emission conductive adhesive with a high initial grab for the installation of conductive carpet, conductive PVC floor covering in sheets and tiles and conductive rubber floor covering in sheets and tiles with a smooth back. Very low VOC-emission, emicode EC1, solvent-free, non-flammable, easy and safe to apply, multi-purpose application, high initial adhesion strength, favourable spreading capacity, roller-castor-chair resistant, electrical resistance < 3*105 Ohm (EN 13 415).
| Article reference: | 641 |
| SAP nr: | 53652 |
| Package: | 10 l. (12 kg) |
| Spreading capacity: | TKB S1: 260-300 g/m² |
| B2: 300-400 g/m² |
High quality solvent-free adhesive for the installation of PVC strips and tiles on smooth subfloors. Non-flammable, solvent-free, roller-castor-chair resistant, favourable spreading capacity, no grin through of adhesive trowel marks, easy and safe to apply, high final bond strength.
| Article reference: | 543 |
| Package: | 10 kg bucket |
| Spreading capacity: | 100-150 g/m², on levelled subfloors. |
Low VOC-emission, solvent-free, powerful dispersion-based contact adhesive with a strong adhesion for the two-sided fixing of carpet on stairs, PVC nosing, PVC adhesive skirting, rubber nosing, hollow skirting of hard floor covering and cork floor covering. Low VOC-emission, emicode EC2, solvent-free, powerful enough to bear high tensions, high initial adhesion strength, reactivate through warmth, tool included.
| Article reference: | 650 |
| SAP nr: | 77554 |
| Package: | 5 l. (7.5 kg) |
| Spreading capacity: | 250 g/m² per coat |
Welding Rods
Colorex tiles and all the accessories on this page can be welded with Colorex welding rod, which is available in colours to match the main Colorex tile.
In standard 4 mm diameter and 100 m coils
In highly sensitive health care areas, and any other location that has strict hygiene requirements, it’s vital that floor-to-wall transitions are water-tight, perfectly hygienic and aesthetically pleasing. Our integrated coving system creates a perfect seal for these critical areas using the same Colorex material. The system is available in every colour in our collection and consists of the following parts:
The cove skirting, which is available in rolls, is cut and welded from the original Colorex tiles assuring quality from wall to wall. The cove skirting can be formed up the wall by the use of a cove fromer and underlying profile which ensures a smooth transition between wall and floor and avoids right angle joints which may trap dirt.
| Length: | 12,2 m. |
| Height: | 15 cm |
| 5 cm on the floor plus 10 cm up the wall |
The corners are moulded from original Colorex material and reinforced to assure the best possible result and making sure the most critical parts are manufactured in a controlled environment. Welding is not required. Including resin reinforcement on the back.
| Radius: | 20 mm |
Colorex tiles and all the accessories on this page can be welded with Colorex welding rod, which is available in colours to match the main Colorex tile.
In standard 4 mm diameter and 100 m coils
| Diameter: | 4 mm |
| Coil: | 100 m |
Special Colorex Plus accessoires:
In applications where Colorex Plus has been installed as a stand alone working island or does not finish at a wall, acces ramps are available in grey or colour matched to the main Colorex tile (Signal colours on request).
There are two types of skirtings available for the various versions of Colorex Plus, each is designed to address a different solution. In hygiene critical areas, the proposed solution is similar to that used with 2 mm Colorex tiles with tailor made coved skirting which should be fitted by a skielled and trained installler. If Colorex Plus has been fitted over a damp floor, we can provide a ventilated skirting that allows the humidity to escape into the room.
| Radius: | 20 mm |
Forbo Flooring is aware that the majority of the costs incurred during the lifetime of a durable floor is coming from its care and maintenance. This is why our Colorex flooring products have always been developed with a special attention to easy and environment friendly cleaning methods and consistent appearance retention properties. This will allow you to renounce completely on labour and cost intensive maintenance coatings, floor finishes and alike.
The use of protective or maintenance coatings such as waxes and polymer dispersions may have a negative effect on conductivity. Only products designed specifically for conductive floors should be used.
Floorcare Products
Cleaner is a pH neutral detergent, which leaves no residue and settles practically all common stains and soiling. Clean with Cleaner or Monel and mop: pick up dirty water with wiper and mop or water vac, rinse with clean water and mop, allow floor to dry.
| Article reference: | 816 |
| SAP nr: | 29650/29652 |
| Package: | 10 l |
Spray has a perfect performance for local spray cleaning. ForboSpray also will refurbish local small distortions such as scratches and has excellent buffing properties, thus restoring the desired visual behaviour of the flooring. Spray method: dry buff with rotary machine and buffing pad, full spray with Spray, rotary machine and buffing pad.
| Article reference: | 810 |
| Package: | 10 l |
| Article reference: | 811 |
| SAP nr: | 29624/29626 |
| Package: | 6* 0.5 l |
Monel, based on natural components, offers a practical protection film and perfect cleaning properties in one product. Monel method: apply Monel film using Monel solution and mop, allow floor to dry.
| Article reference: | 818 |
| SAP nr: | 29643/29641 |
| Package: | 10 l |
Weldfinish protects welding rods from initial soiling. During installation and/ or after the final trimming of the rod, Weldfinish can be easily applied with the Weldfinish applicator.
| Article reference: | 616 |
| SAP nr: | 66297 |
| Package: | 10 l |
| Article reference: | 816 |
| SAP nr: | 75982 |
| Package: | 12*1 l |
| Article reference: | 814 |
| SAP nr: | 75985 |
| Package: | 12*1 l |