Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

ESD & Cleanroom Flooring

Forbo offers a wide range of installation, cleaning and maintenance products via our sister company Forbo Eurocol and a number of local UK partners.

Download our handy Forbo Adhesive Guide

24/7 chatbot support

For full details on all Eurocol adhesives, sealers, primers and subfloor leveling products suitable for use with Forbo floor coverings please visit the Eurocol website: Forbo Eurocol

Installation Products

Adhesives

641 Eurostar Special EL

Very low VOC-emission conductive adhesive with a high initial grab for the installation of conductive carpet, conductive PVC floor covering in sheets and tiles and conductive rubber floor covering in sheets and tiles with a smooth back. Very low VOC-emission, emicode EC1, solvent-free, non-flammable, easy and safe to apply, multi-purpose application, high initial adhesion strength, favourable spreading capacity, roller-castor-chair resistant, electrical resistance < 3*105 Ohm (EN 13 415).

Suitable for:
Colorex SD/EC

Article reference:641
Order Unit:12kg
Coverage:Up to 46m²

641-Eurostar-Special-EL

Welding Rods

Colorex welding rods

Colorex tiles and all the accessories on this page can be welded with Colorex welding rod, which is available in colours to match the main Colorex tile.

Order Unit:1 pack (2 coils per pack)
Size:1 pce = 4mm diameter x 50lm coil

Colorex-Welding_Rod

Subfloor and Underlay Systems

Forbo QuickFit Panels

The Forbo Quickfit system comprises self-adhering MDF panels and damp-proof sound insulating Forbo foam. Forbo Quickfit offers: A rapid, smooth finish. Quick and easy installation. No visible subfloor seams. Excellent moisture barrier. Easily removable.

Improved impact sound insulation in combination with Forbo Foam (Δ Lw= 23 dB according to NEN-EN-ISO 140-8 and 717-2).

Note this is not needed for Colorex plus products as they are already a loose lay system and do not require a further underlay.

Order Unit:1 pack (3.6 m²)
Gauge:7mm
Width:1200mm x 600mm panels

Forbo Quickfit

Forbo Foam

Polypropylene foam laminated with metallised polypropylene foil. The foil top layer incorporates a self-adhesive overlap of 20 cm for secure seams.

Order Unit:1 roll (25lm)
Gauge:4mm
Width:1m
Length:25lm

Forbo-Foam

Skirting & Profiles

Skirtings & Profiles

In highly sensitive health care areas, and any other location that has strict hygiene requirements, it’s vital that floor-to-wall transitions are water-tight, perfectly hygienic and aesthetically pleasing. Our integrated coving system creates a perfect seal for these critical areas using the same Colorex material. The system is available in every colour in our collection and consists of the following parts:

White-Blank-Filler

Pre-formed internal and external corner pieces

The corners are moulded from original Colorex material and reinforced on the reverse with resin to increase the durability. Designed to avoid the need to weld into corners, thereby providing installations that meet the requirements for cleanrooms.

Suitable for:
All Colorex installations

Order Unit:1 pce


re-formed-internal-and-external-corner-pieces

Pre-welded skirting strip

The cove skirting, which is available in rolls, is cut and welded from Colorex material providing consistent quality from wall to wall. The cove skirting can be formed up the wall over a cove former.

Suitable for:
All Colorex installations

Order Unit:1 pack (2 rolls per pack)
Size:1 pce = 12.3lm x 150mm (5cm on the floor & 10cm up the wall)


Cove-skirting-strip

Colorex welding cable

Colorex welding cables are available in colours to match the main Colorex tile.

Suitable for:
All Colorex installations

Order Unit:1 pack (2 coils per pack)
Size:1 pce = 4mm diameter x 50 lm coil

Colorex-Welding_Rod

Cove former profile

Cove former profile.

Suitable for:
Colorex EC/SD installations

Radius:20 mm
Package:50 Lm

Colorex EC/SD cove former profile

Copper Strip

Self-adhesive copper-strip for use when installing a conductive floor covering.

Order Unit:1 pack (20lm per pack)
Size:1 pce = 20lm x 10mm


801 Copper Strip - Colorex

Special Colorex Plus accessoires:

Colorex plus access ramp

In applications where Colorex Plus has been installed as a stand alone working island or does not finish at a wall. Access ramps are available in grey or colour matched to the main Colorex tile.

Suitable for:
Colorex Plus installations

Order Unit:1 piece
Size:1 pce = 1.22lm x 153mm


Colorex plus access ramp

Colorex Plus Fixed Ventilated Skirting

When Colorex Plus has been fitted over a damp floor, ventilated skirting allows the humidity to escape into the room.

Suitable for:
Colorex Plus installations

Order Unit:1 pack (10 pcs per pack)
Size:1 pce = 2.5lm


Colorex Plus Ventilated Skirting

Colorex Plus Connecting Profiles

Inner and outer corner and connecting profile for use with Colorex plus ventilated skirting.

Suitable for:
Colorex Plus installations

Order Unit:1 pack (10 pcs per pack)


Colorex plus connecting profiles

Colorex Plus Cover Former Profile

Special cove former profile.

Suitable for:
Colorex Plus installations

Order Unit:1 roll (2.5lm)
Size:1 pce = 2.5lm x 50mm


Colorex Plus special former profile

Leveling Compounds & Sealants

Leveling Compounds & Sealants

Forbo Eurocol is a leading manufacturer/supplier of technical products for renovation and new construction projects. Specialists in tile adhesives, grout materials and leveling compounds and all ancillary products, we also manufacture a complete range of adhesives for the installation of floor and wall coverings. eurocol products

Leveling Compounds & Sealants

Floorcare

Forbo FloorCare method ESD & cleanroom

The dense construction of Colorex provides a pore-free surface which is resistant to harsh chemicals and can be fully repaired, extending the useful life of the product.

Please download the cleaning and maintenance advice opposite for specific instructions.

General advice

Protect newly laid floors
All newly laid floors should be covered and protected from all other trades during the contract with a suitable non-staining protective covering. Use protective feet on chairs and tables to reduce scratching. Castor wheels should be of soft material suitable for resilient floor coverings (according to EN425)

Use Entrance Systems
As much as 80% of dirt entering a building is brought in by foot traffic. Entrance flooring systems of an appropriate size (ideally more than 6lm) and quality should be used. Forbo Coral or Nuway entrance flooring systems, are independently proven to remove and retain up to 94% of all dirt and moisture entering a building by foot traffic; reducing maintenance costs and maximising appearance retention of adjacent flooring products as well as reducing slip risk. As with any dirt removal system all entrance flooring systems should be regularly cleaned to release the dirt which has been removed.

Cleaning
• Regular cleaning is more beneficial and cost effective than occasional deep cleaning.
• Use recommended cleaning products. High quality cleaning products and equipment ensure efficient maintenance and represent only a small proportion of maintenance costs.
• Always follow the manufacturer’s instructions for cleaning products.
• Always follow the Health and Safety guidance provided.

Proper use of Floor Care Chemicals
The improper use of cleaning chemicals may cause damage and/or discolouration. Overuse or inadequate rinsing of cleaning chemicals may compromise the performance of the floor.
Abrasive powders or cleansers should not be used.

Recommended Floor care products
It is impractical for us to monitor all cleaning solutions and there are many suppliers available. For more information on Cleaning & Maintenance products please contact our UK partner Wrennalls T: 01772 435 739. Other floor care products may be used on Forbo resilient floor coverings. If alternative products are to be used, consult with your regular supplier for more information and guidance.

Important notice for ESD protected areas (conductive floors)

The use of protective or maintenance coatings such as waxes and polymer dispersions may have a negative effect on conductivity. Only products designed specifically for conductive floors should be used.

ESD-Protective-Areas

YouTube Guides