SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

eurocol
500 EUROSAFE MULTI

500

Multi-purpose floor covering adhesive with a high initial grab.

500-eurosafe-multi.jpg
  • epdfeica- 500 eurosafe multi-uk.pdf

    epdfeica- 500 eurosafe multi-uk.pdf

  • pdf-product-specification.pdf

    pdf-product-specification.pdf

  • 500-safety data sheet uk.pdf

    500-safety data sheet uk.pdf

Product Typification

Multi-purpose floor covering adhesive with a high initial grab.
Basis : Superior acrylic dispersion.
Colour : Beige.
Consistency : Thick liquid.

Product advantages:
  • Multi-purpose application
  • Non-flammable
  • Easy and safe to apply
  • High initial adhesion strength and final bond strength
  • Favourable spreading capacity
  • Roller-castor-chair resistant 

Performances

Consumption : Spreader B1: 325 - 425 g/m².
Spreader A2: 300 - 350 g/m².
Curing : 24 hours.*
Flammability : Non-flammable.
Specific weight : 1.55 kg/l.

Application

Application:

For installing:

  • PVC and cushion vinyl flooring
  • synthetic backed carpet
  • hessian-backed carpet
  • PVC backed-carpet
  • needlefelt
  • linoleum
  • corkment
  • cushion vinyl

Working Process

Tools : Eurocol spreader no. 850/B1 when installing carpet, needlefelt, linoleum and corkment. Eurocol spreader no. 852/A2 when installing carpet with a PVC back and PVC and cushion vinyl flooring.
Open time : 15 - 30 minutes.*
Waiting time : 0-10 minutes.*
Application temperature : 
Curing : 24 hours.*
Storage : Store cool and free from frost.
Shelf Life : Approx 12 months, in unopened packaging.
Cleaner : Water.
Sensitive to frost : Yes.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
Spreader B1: 325 - 425 g/m².
Spreader A2: 300 - 350 g/m².

Substrate:
  • 500 Eurosafe Multi is suitable for any type of subfloor that has a good tensile and compression strength. The subfloor should also be even, clean, permanently dry and free from grease and dirt, according to the requirements of BS 8203 or DIN 18 365.
  • Only use vapour pervious floor coverings on impervious subfloors.
  • When installing cushion vinyls or a carpet with a closed back on fully impervious subfloors apply a 2 mm levelling compound layer.
  • In advance always seek our technical data sheets. In doubt about the application ask for technical advice.


User manual:
  • Apply the adhesive with the recommended adhesive spreader.
    - Eurocol spreader no. 850/B1 for installing carpet, needlefelt, linoleum and corkment.
    - Eurocol spreader no. 852/A2 for installing PVC and cushion vinyl flooring and carpet with a PVC back.
  • On absorbent subfloors apply the floor covering within 10 minutes into the wet adhesive. On low absorbent subfloors keep a waiting time of 10 - 30 minutes (depending on porosity of the subfloor, temperature and relative humidity).
  • When installing PVC and cushion vinyl flooring and carpet with a PVC back the subfloor should be moisture absorbent and apply the floor covering into the wet adhesive.
  • Roll the floor covering carefully. Sheet-ends, possible bight marks and longitudinal joints are to be pressed firmly.
  • On low absorbent subfloors, in case of impervious back qualities and/or when circumstances are less ideal, rolling and pressing should be repeated after approx. 15 minutes (depending on temperature and relative humidity).
  • Remove fresh adhesive spots immediately with water.

Working conditions:
Required surrounding temperature : 18 - 23° C.
Temperature for material and subfloor : min. 15° - max. 20 ºC.
Relative humidity : 40 - 80%.

Underfloor heating systems:
500 Eurosafe Multi can be applied on underfloor heating systems. The startprotocol of the floorheating needs to be completly executed in accordance with the directives of the supplier. Turn off the heater 24 hours before application. Do not heat again until at least 24 hours after installation, in steps of maimun 5 °C water temperature per day.

Contains methylchloroisothiazolinone and  methylisothiazolinone (3:1) and benzisothiazolinone. May produce an allergic reaction.





Environment and health

Hazard Class : None.
Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155.
MSDS : For extensive information about safety and environment we refer to our website www.eurocol.nl.





Articles

Article Definition Packaging EAN-code
500Eurosafe Multi15 kg bucket8 710345 515009