SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Forbo Websites

Select a division
Forbo Group
Forbo Flooring Systems
Forbo Movement Systems
CONTACT FAQ

eurocol
055 ADDITIVE

055

Adhesive and additive for tile work and mortars for the waterproofing and extra adhesion of (large) floor tiles. Suitable for indoor and outdoor use.

055-eurodicht.jpg
  • 055-safety data sheet uk.pdf

    055-safety data sheet uk.pdf

  • pdf-product-specification.pdf

    pdf-product-specification.pdf

Product Typification

Adhesive and additive for tile work and mortars for the waterproofing and extra adhesion of (large) floor tiles. Suitable for indoor and outdoor use.
Basis : Synthetic resin dispersion.
Colour : White.

Product advantages:
  • For in- and outdoor use 
  • Non-flammable 
  • Thin liquid easy to mix 
  • Multi-purpose application 

Performances

Consumption : Spreading capacity:  app. 0.5 kg/m².
Curing : 1-4 days, depending on the subfloor, application and temperature. Lower temperatures will slow down the bonding.
End strength : Depending on the applied quantity of cement, water/cement factor etc.
Specific weight : 1.0 kg/l.

Application

Application:
  • Additive for mortars, for the water-resistant fixing of tiles. 
  • Adhesion improving additive for bonding-cement-slurry in case large tiles have to be fixed.
  • Adhesion improving additive for mortars on critical subfloors, e.g.:
    - smooth and impervious subfloors;
    - high moisture absorbent subfloors.
  • Additive for mortars in favour of:
    - higher mechanical strength;
    - higher bending strength;
    - smaller shrinkage. 

Working Process

Mixing ratio : See directions for use.
Application temperature : > 5 °C.
Processing time : Apply the mortar within 90 minutes.
Curing : 1-4 days, depending on the subfloor, application and temperature. Lower temperatures will slow down the bonding.
Storage : Store free from frost. Protect against high temperatures.
Shelf Life : 12 Months, in unopened packaging. After use close the open packaging well.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
Spreading capacity:  app. 0.5 kg/m².

Substrate:
  • The subfloor should be clean, free from grease and dust, dry and have a good tensile and compression strength. 
  • In advance always seek our technical data sheets. In doubt about the application ask for technical advice. 


User manual:

As an additive for bonding-cement-slurry in case large tiles have to be fixed:

  • Add to 7 parts by volume of cement 1 part of 055 Additive and 2 parts of water.
  • Stir thoroughly, preferably with an electric drilling machine, to a smooth and homogeneous mixture. 
  • Pour out the mixture on the mortar bed and divide it with a 8 x 8 mm notched adhesive spreader. 
  • Place the floor tiles within 15 minutes with a shuffling movement into the mortar. 
  • Do not tap on the tiles with a hammer. 
  • Spreading capacity: approx. 0.5 kg/m².

As a adhesion improving additive for mortars on critical subfloors:

  • Add approx. 9.5 parts by volume of powder tile adhesive to 1 part of 055 Additive and 2 parts of water.
  • Mix the mortar, preferably with an electric drilling machine, to a smooth and homogeneous mixture. 
  • Apply the mortar on the subfloor with a broom or a 4x4 notched adhesive spreader. 
  • In case of vertical application the mortar has to dry completely.
  • Work wet-in-wet when applying a “rendering slurry” for mortars.
  • Spreading capacity: approx. 0.3 kg/m².

As an additive for mortars to improve the watertightness:

  • Mixing ratio sand/cement 3:1. 
  • Add to 50 kg cement 3 kg of 055 Additive to the mixing-water and mix until a homogeneous mortar. 
  • Spreading capacity: approx. 0.2 kg/m² per cm layer thickness.

Contains methylchloroisothiazolinone and methylisothiazolinone (3:1) and benzisothiazolinone. May produce an allergic reaction.





Environment and health

Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155.
MSDS : For extensive information about safety and environment we refer to our website www.eurocol.nl.





Articles

ArticleDefinitionPackagingEAN-code
055Additive10 kg jerrycan 8 710345 055031