Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Marmoleum FAQ's

Listed below are the most frequently asked questions about our Marmoleum collection.

If you would like to download technical/environmental specifications, BRE results, NBS specification, please visit the Marmoleum Downloads section.

For installation, cleaning & maintenance guides and videos, please visit the Installation & Floorcare section.

All available BIM objects for our Marmoleum collections can be directly downloaded from the BIM page.


Do I need to weld my new Marmoleum floor covering?

Do I need to weld my new Marmoleum floor covering?

The decision to weld Marmoleum is a purely aesthetic decision. A tight edge fitment along the seam will provide a secure and serviceable join for general purpose locations. For healthcare and specific location requirements, welding may be the most appropriate option.

To weld, or not to weld

Marmoweld multicoloriert

What is the weight of a roll of Linoleum?

2.5mm thick linoleum weighs 2.9kg per sm. So typically, a 32 linear metre roll would weigh 186kg

Do you have recommended cleaning products for your linoleum products?

Do you have recommended cleaning products for your linoleum products?

Can you confirm that Marmoleum is suitable against possible spillages of the following chemicals etc?

Can you confirm that Marmoleum is suitable against possible spillages of the following chemicals etc?

Forbo Marmoleum products are subject to indicative chemical/stain testing in accordance with European standards. The tests provide baseline information on the effects of short term exposure to chemicals after cleaning and should be used as a comparative guide.

If specific chemicals are of particular concern we would advise that the effects are checked by the client on a sample of the proposed colour and material in conditions representative of those that will be experienced in service.

Is your Bulletin Board paintable?

Is your Bulletin Board paintable?

Yes. We would suggest using a water based emulsion paint, but would advise testing the application first for adhesion on a small sample of material. However, as the paint is going to be less flexible than the Bulletin Board, marks may remain visible in the paint layer.

Bulletin Board

Is Marmoleum cigarette proof?

Is Marmoleum cigarette proof?

The simple answer is no. Marmoleum has a high wood flour content so when cigarettes are stubbed out on the floor the surface will behave in a very similar way to a wooden floor. In our product literature we state that “Marks left on linoleum as a result of a stubbed out cigarette can be removed”.

A stubbed out cigarette will often leave a scorch mark on the surface of both wood and linoleum products (unlike PVC floor covering where the surface will melt leaving a permanent scar).

This mark can be removed by lightly abrading the surface of the floor with fine wire wool or a cleaning pad until the scorch mark is removed. The floor surface can then be re-finished locally if necessary with a light application of a matt or satin finish floor maintainer, which should be buffed in with a soft cloth or pad once dry.

If a cigarette is left to smoulder on the floor, then (as with wood) the scorch mark would become a burn.
This is not impossible to remove, but more of the surface of the linoleum would have to be removed so there is a likelihood that whilst the scorch mark is gone you will see some disturbance of the finish to the linoleum.

Does Marmoleum share the same flexibility properties as vinyl?

Does Marmoleum share the same flexibility properties as vinyl?

Marmoleum has a degree of flexibility to allow fitting after templating. Once acclimatised (between 18 to 27 degrees Celsius) the product has moderate flexibility to allow placement on the floor. Excessive bending or folding of the product is not possible do the construction of the product as this will cause cracking.

All resilient flooring use the standard to comply with EN-ISO 24344 (test method EN435). For linoleum, the standard is 40mm as declared in our Marmoleum technical specifications.

Marmoleum Cocoa 3584-3581-3370

Can Forbo floor covering be installed in conjunction with third party acoustic underlays?

Can Forbo floor coverings be installed in conjunction with third party acoustic underlays?

Forbo Flooring offer a range of acoustic underlay systems that offer improved impact sound reduction properties.

These include:

• Corkment which can be used under any Forbo Sheet linoleum or vinyl floor covering offering an impact sound reduction value of 14 dB.

• Vinylbase which can be used under Forbo sheet vinyl floor coverings offering an impact sound reduction of 18 dB.

In addition, single stick acoustic solutions are available in:

• Linoleum, offering impact sound reduction values of 14 dB or 17 dB.
• General purpose sheet vinyl, offering impact sound reduction values of 15 dB to 19 dB.
• Vinyl Safety flooring, offering impact sound reduction values of 18 dB.

All Forbo products are supported by system performance test data, product compatibility, installation guidance, and wear life warranties.
For further information on product compatibility and installation guidance please contact us.