SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

eurocol
833 EUROFINISH SPORT DUO

833

Two-component PU-dispersion-based sport-floor lacquer, mat. Suitable for sports floor coverings according to DIN 18032.

833_eurofinish sport duo.jpg
  • pdf-product-specification.pdf

    pdf-product-specification.pdf

  • safety data sheet_eurocol_833-sport duo_uk.pdf

    safety data sheet_eurocol_833-sport duo_uk.pdf

  • safety data sheet_eurocol_833 hardener aqua le_uk.pdf

    safety data sheet_eurocol_833 hardener aqua le_uk.pdf

Product Typification


Basis : PUR dispersion with isocyanate hardener.
Colour : Laquer: white. Hardener: transarent.
Gloss : mat
Consistency : Thin liquid.

Product advantages:
  • Very high quality, two component, PU-based lacquer with excellent spreading properties.
  • For extremely abrasion resistant, highly-durable top coating of new, uncoated sports floor coverings made of linoleum or parquet.
  • Suitable for re-coating of used subfloor covering.
  • Certified according to German standard DIN 18032 in combination with sport floor maintenance 897 Euroclean Sport.
  • Meets requirements of ÖISS guidelines concerning sliding friction and gloss level.
  • For interior use.
  • Emission tested building product according to DIBt principles. 

Performances

Consumption : Roller: approx. 120 ml/m² (per coat).
Curing : Fully set after 7 days.
Flammability : Non-flammable.
Frost resistance : No.
Passableness : First careful use after 24 hrs. Fully set after 7 days.
Special quality : Especially for the lacquering of sports floors.
Specific weight : 1,04 g/cm³

Application

Application:
For lacquering of uncoated sports floor coverings made of linoleum or parquet.

Working Process

Storage : Store cool and dry in unopened packaging.
Tools : Microfibre roller.
Mixing ratio : 10 parts laquer : 0,6 part hardener
Processing time : Use within 90 minutes after mixing.*
Waiting time : Approx 4 - 5 hours after roller application.
Shelf Life : 12 months, in unopened packaging.
Cleaner : Water.
Frost-proof : No.
Remarks : 

Technical information and safety data sheets of other installation products must be considered!
Please pay attention to the batch number. Only use products of the same batch in a coating layer. If multiple products are used, they must be mixed before processing.

When renovating old floors, please consult our application technology department.

For the matt finish on dark woods, apply a maximum of 3 coats of lacquer. The high proportion of matting agent can influence the transparency of the lacquer (milk glass effect).
Before use on unknown wood types, own tests are necessary to prevent colour changes, bleeding or wetting disorders.
Softeners from contacting materials (e.g. chair castors, carpet underlays, felt gliders) can lead to discoloration or softening of the lacquer.
The hardened lacquer layer is extremely resistant to chemicals. However, colouring products (e.g. hair dyes, coloured disinfectants) and products containing softeners (e.g. car tyres, chair castors, carpet underlays, felt glides) can lead to irreparable discolouration of the lacquer layer. When using such products, as well as when using disinfectants, preliminary tests must be carried out on the installation materials to be used.

According to DIN 18356, sealed parquet floors must be maintained at all times. For this, we recommend Eurocol care and cleaning products. Please request separate information and care instructions. Only apply a product used for polymer protection care after
hardening of the lacquer coating. We recommend Eurocol care and cleaning products. 

Not suitable for application on wooden pavement floors.
Do not operate partial mixing.


* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
Roller: approx. 120 ml/m² (per coat).

Substrate:
  • The sealed surfaces should be clean and without traces of oil, wax, silicone and other adhesion-reducing layers.

PARQUET:

  • Priming is necessary to reduce any possibilities for edge gluing.

Linoleum:

  • The surface of the linoleum is to be cleaned thoroughly with 891 Euroclean Basic followed by a neutralizing and a 12 hour drying time.


User manual:

Before use, temper the product according to the processing conditions.

  • Stir before use!
  • The hardener LE (component B) has to be added completely to base (component A). Once fully added, stir the mixture for a minimum of 2 minutes until it becomes a homogenous mass. Allow it to react for 10 minutes and briefly shake again
    and homogenize. Add the appropriate lacquer to a mixing container. Use a scraper grid during application.
  • Application to be done with  a new, clean Eurocol Aqua microfiber roller.
  • The application to avoid any footprints on the floor.
  • Do not apply more than two roller coats of lacquer in one day.
  • Do not use the product after the end of the pot life. End of pot life ist not recognizable by viscosity change!

Linoleum:

  • One full coat of varnish is applied with Eurocol microfibre rollers to the thoroughly cleaned and dried linoleum.
  • Line marking with suitable Eurocol playing field markings is carried out after application of the last coat of varnish (on top).

Parquet:

  • To achieve uniform surface, apply the lacquer twice cross-wise or a uniform roller application with subsequent top coat application with roller. Eurocol recommends 2 roller applications.
  • In the same day, do not apply the product more than twice.
  • Drying time in-between layers is approx. 4 hours but not more than 24 hours.
  • The surface needs to be sanded with an abrasive grid 100 or 120. Remove the dust with an industrial vacuum cleaner.
    Intermediate sanding improves the surface finish. Remove dust remains on the sanded surface.
  • Line marking with suitable Eurocol playing field markings is carried out after application of the last coat of varnish (on top), but can also be carried out before the last varnish application (embedded).
  • During the drying process, even ventilation must be ensured. Draughts and direct sunlight must be avoided.

Recommended primers:

Eurocol 883 Europrime Perfect   
Rollable and trowelable, Low side-bonding. High neutrality of the wood tone. Long wet-on-wet workability (rollability). No visible seams during rolling and filling

Working conditions:
Required surrounding temperature: min. 18°C.
Material and subfloor temperature: min. 15°C.
Relative humidity: 35 - 75%, recommended <65%.





Quality and guarantee

Environment and health

Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Material residues can be disposed of as household waste.
MSDS : For extensive information about safety and environment we refer to our website www.eurocol.nl.
GISCODE : W2/DD+
LEED : VOC 0,2 g/l, meets - erfüllt: IEQ Credit 4.1
DGNB : VOC 0,02 %, quality level - Qualitätsstufe: 3
Substances causing allergy : Contains 1,2-benzisothiazol-3(2H)-one, mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247- 500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction.


Articles

artikelproductnamepackagingshipping unit
833Eurofinish Sport DuoPE jerrycan à 4,3 l102/Palette
HardenerAqua LEPE bottle à 0,26 kg
36 bottles/box
864/palett