Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2



Game line marking, full area covering in sport areas. 2-C PUR paint.

  • safety data sheet_eurocol_809-a-hardener_uk.pdf

    safety data sheet_eurocol_809-a-hardener_uk.pdf

  • safety data sheet_eurocol_809-a-harz_uk.pdf

    safety data sheet_eurocol_809-a-harz_uk.pdf

  • pdf-product-specification.pdf


Product Typification

Basis : Pigmented, solved PUR with isocyanate hardener.

Product advantages:
  • Highly abrasion resistant, semi-elastic curing, two-component, PU-based paint with high capacity for full area, one-layer coating of permitted resilient floor covering (linoleum, vinyl, rubber and parquet floor coverings).
  • Ideal for game line marking in sport halls.
  • Colours: red, orange, yellow, blue, light blue, green, white and black.
  • Contains solvents! Pay attention to the safety data sheet!


Consumption : approx. 60 running m/can 0.5 kg with 5 cm wide line.
Flammability : Flammable.
Frost resistance : Yes.
Passableness : 2 - 3 hrs.*
Special quality : Elastic. Highly durable
Specific weight : 1,12 g/cm³.


For game line marking in sport halls.

Working Process

Storage : Store cool and dry in unopened packaging.
Tools : Paint roller 6 cm
Processing time : Use within 60 minutes after mixing.*
Drying : Recoat within 3 - 24 hours*.
Shelf Life : 15 months, in unopened packaging.
Application temperature : Pay attention to dew point!
Frost-proof : Yes.
Remarks : 

Technical information and safety data sheets of other laying materials and floorings/parquet must be observed!

According to DIN 18032, sports floors must be continuously maintained. Only 897 Euroclean Sport is to be used to maintain the coefficient of sliding friction according to DIN 18032 for sports floors.
Please request separate care instructions.

Lines without overpainting are subject to greater wear and tear and are considered a maintenance area that must be checked regularly for completeness.
Due to possible adhesion problems on fusion or welding wires, we recommend that you carry out appropriate preliminary tests or interrupt the line marking via joints. Maintenance area!

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

approx. 60 running m/can 0.5 kg with 5 cm wide line.

  • The parquet floors to be marked must have a suitable primer and a first coat of varnish suitable for sports floors, which can be recoated according to the product, sanded if necessary.
  • The lacquer surface must be roughened by intermediate sanding (grain size 150) and then carefully dedusted.
  • Before applying the adhesive tape, carefully clean sports linoleum, sports PVC, elastomeric flooring with 891 Euroclean Basic.
  • According to the hall planning, the areas to be marked are to be masked with suitable adhesive tape. The adhesive tape must be firmly stuck on throughout to prevent infiltration by the paint. Adhesive tape
    for this purpose roll on with a pressure roller.

User manual:

Before use, temper the product according to the processing conditions.

Stir before use!

  • Pierce the bottom of the hardener component and allow the complete hardener quantity to drain into the lower can. Mix master lacquer and hardener.
  • Cover planned markings with suitable adhesive tape.
  • Apply the field markings with a foam roller fine 6 cm evenly covering and free of build-up in one operation.
    With white and yellow, a second application of the paint may be necessary due to dark surfaces.
  • For area colouring, bring together the corresponding quantities (consumption approx. 125 g/m²), especially in case of batch differences, in a larger container and mix with the hardener. Apply with the Eurotool Oil-Wax Roller.
  • The adhesive tape must be carefully removed immediately after the field marking has dried, in order to achieve a clean tear-off.
  • During the drying process, ensure even ventilation, avoid drafts and direct sunlight.
  • After drying of the playing field marking and removal of the adhesive tapes, the parquet surface can be overpainted. When doing so, make sure that no adhesive residues from the adhesive tape remain on the floor, as these act as separating agents for the top coat work.
  • Linoleum can be coated with approved Eurocolor 1-K or 2-K lacquer as linoleum sealant after the 809-A Eurocolor Game Line Duo has dried.

The finishing with top coats must be carried out within 24 hours. If this time is exceeded, an intermediate sanding must be made to improve adhesion.

Processing conditions: 

At least 15 °C floor temperature,
at least 18°C material and room temperature,
35-75% relative humidity, recommended <65%.
Pay attention to dew point!
Do not mix partial quantities!

Environment and health

Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Material residues can be disposed of as household waste.
MSDS : For detailed information about the safety measures please refer to the safety information sheet on our website


articleproductnamepackagingshipping unit
809AEurocolor Game Line Duo0,5 kg tin combi bucket