Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2



Dispersion-based parquet adhesive,
special mosaic parquet adhesive.

  • pdf-product-specification.pdf


  • safety data sheet_eurocol_551_parquet_pro_uk.pdf

    safety data sheet_eurocol_551_parquet_pro_uk.pdf

Product Typification

Basis : Copolymer dispersion, mineral fillers, thickeners, wetting agents, defoaming agents, preservatives, colourants.
Colour : Lightbeige.
Consistency : Thick liquid.

Product advantages:
  • Shear-resistant dispersion parquet adhesive curing according to EN 14293.
  • For the installation of standard-compliant mosaic parquet, wood type oak. For other types of wood, such as beech, ash, maple, etc., only installation in cube, herringbone pattern.
  • Gluing is carried out on standard-compliant cementitious subfloors (screeds or levelling compounds) that are suitable for the installation of parquet.
  • Please consider the manufacturer‘s approval for dispersion-based adhesives.
  • Can be applied over underfloor heating.
  • For indoor use only.


Consumption : Approx. 900 g/m² (TKB/B3)
Curing : 12 - 48 hours *
Flammability : Non-flammable.
Frost resistance : No.
Specific weight : Ca. 1.5 kg/l.



For installation of 

  • mosaic parquet element.

Working Process

Storage : Store free from frost. Protect against high temperatures.
Tools : Spreader B3.
Open time : Approx 10 minutes.
Waiting time : None.
Shelf Life : 15 months, in unopened packaging.
Cleaner : Water.
Frost-proof : No.
Remarks : 

Technical information and safety data sheets of other installation materials and parquet must be observed!

When removing parts, close the adhesive bucket tightly immediately after finishing work.

The room climatic conditions during laying must correspond to the later conditions of use in order to counteract dimensional changes of the parquet. The wood humidity must be checked.

Do not use directly on dense, non-absorbent subfloors. If necessary, apply a full-surface levelling compound.

Other Eurocol parquet adhesives are available for bonding parquet types other than those listed. Please contact our application technology department.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Approx. 900 g/m² (TKB/B3)

  • The substrate must be pressure- and tension-resistant, permanently dry, free of cracks and dust, even and free of layers that reduce adhesion.
  • Adhesion-reducing layers, old material residues must be removed by suitable mechanical measures according to the specifications of DIN 18356.
  • For levelling the subfloor, use Eurocol levelling compounds/primers suitable for parquet.
  • The installation materials to be used must be suitable for the subfloor and the intended use.
  • Absorbent subfloors can be primed with 050 Europrimer Mix or 048 Europrimer Plus if necessary. Drying time - approx. 1 - 2 hours.
  • On heated substrates it is generally necessary to pre-coat.

User manual:
  • Before use, temper the product according to the processing conditions.
  • Remove any ”skin” on top of the adhesive, do not stir or mix any skin with adhesive.
  • Apply the adhesive evenly to the substrate with a toothed strip adapted to the installation and the substrate roughness. If necessary, the toothed strip can be adjusted accordingly to achieve sufficient grooved back wetting. 
  • When laying the parquet, do not press glue between the elements to prevent adhesive marks in the joints.
  • Since with adhesives a slight "floating" of the material to be laid cannot be avoided, the laid surface must not be walked within the setting time. 
  • When working on parquet, ensure that the installed parquet is approx. 10 mm away from the wall.
  • If necessary, the glued parquet must be weighted down during the entire setting time, especially in the case of long parquet elements.
  • Avoid walking on the freshly laid floor until the adhesive has cured.
  • Sanding and sealing is possible under standard conditions after setting of the adhesive. Sanding is delayed at low temperatures, high relativ humidity and high adhesive application rate by up to 2 - 10 days.
  • The surface should first be sealed after re-drying of the wood to its household moisture content. This depends on the type and thickness of the wood, Subfloor condition (absorbency and adhesive application rate), room temperature and air humidity.

Processing conditions: 

at least 15 °C floor temperature,
at least 18°C material and room temperature,
35-75% relative humidity, recommended <65%.

Environment and health

Hazard Class : None.
Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Material residues can be disposed of as household waste.
MSDS : For detailed information about the safety measures please refer to the safety information sheet on our website
Substances causing allergy : Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2- methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1), 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.


artikelproductnamepackagingshipping unit
551Eurosafe Parquet ProPE bucket à 22 kg24/pallet