Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

eurocol
957 WANDOQUICK

957

Fast drying cement-based wall levelling compound.

957-wandoquick.jpg
  • specification-uk.pdf

    specification-uk.pdf

  • 957-ec 1 plus licence uk.pdf

    957-ec 1 plus licence uk.pdf

  • 957-safety data sheet uk.pdf

    957-safety data sheet uk.pdf

  • dop-declaration-uk.pdf

    dop-declaration-uk.pdf

Product Typification

Fast drying cement-based wall levelling compound.
Basis : Cement-powder with additives and a high synthetic binder content, to be mixed with water.
Colour : Grey.

Product advantages:
  • Very low emission
  • Emicode EC 1 plus
  • For indoor and outdoor use
  • Fast drying 
  • Moisture resistant
  • Low-tension
  • Frost-resistant
  • High final bond strength
  • Easy to apply
  • High filling capacity 
  • Layer thickness from 2-50 mm
  • Low chromate
  • Can be sprayed

Performances

Aging : 957 Wandoquick does not deteriorate with age.
Classification : CSIV according to NEN EN 998-1. Multifunction plaster mortar with an increased compressive strength and a reduced water absorbtion for use under ceramic tiles.
Consumption : Approx. 1.1 kg/m² per mm layer thickness.
End strength : 957 Wandoquick is sufficiently strong for installation of heavy wall covering materials e.g. ceramic tiles and natural stone.

Application

Application:
  • For levelling and repairing cement-based and other stony walls, e.g. concrete, cellular concrete, lime-sand stone etc., as well as plaster walls e.g. plasterboard, gypsum blocks etc. on which tiles have to be fixed.
  • For indoor use in a layer thickness from 2 to max. 50 mm (at concrete recess till approx. 70 mm). The mortar is suitable for application using a spray gun.
Also suitable for levelling walls in outside applications, repairing floors and making gradient layers for the tiling. In outside and flooring applications maintain a layer-thickness of at least 10 to a maximum of 30 mm.

Working Process

Layer thickness : 957 Wandoquick can be applied in layer thickness from 2 to 50 mm.
Storage : Store cool and dry in unopened packaging.
Mixing ratio : Add 20 kg of 957 Wandoquick to approx. 6-6.5 litres of water.
Processing time : With a temperature of 20 °C apply the mortar within 30 minutes.
Latency : Approx 2-3 minutes. After that stir again.
Drying : By 20 °C, 2-3 hours for ceramic tiles. With natural stone 24 hours.
Shelf Life : 12 Months, in unopened packaging. After use close the open packaging well.
Application temperature : From 5 to 25 °C (temperature of the surrounding as well as the surface)

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
Approx. 1.1 kg/m² per mm layer thickness.

Substrate:
  • 957 Wandoquick can be applied on any type of subfloor that is rigid and has a good tensile and compression strength. The subfloor shouls also be clean, dry and free from grease and dirt.
  • Remove all old onstable paint-, lime- and plaster layers.
  • Prime smooth and impervious walls with 014 Euroclean. Therafter wait for the subfloor to dry completely. Prime with 051 Europrimer Quartz (indoor apllication).
  • Prime porous walls with 099 Dispersionprimer.
  • In advance seek our technical data sheets. In doubt about the application ask for technical advice. 


User manual:
  • Add 20 kg of 957 Wandoquick to approx. 6-6.5 litres of cool and clean tap water.
  • Strit the mortar for 1 minute, by using an electric stirrer, to a smooth ang homogeneous mixture.
  • Wait for a few minutes, stir once again and apply the mortar within 30 minutes with a flat trowel.
  • First apply the mortar in a thin layer and thereafter apply the mortar wet in wet in the required layer thickness.
  • For extra smoothing strike off the subfloor with a wet trowel and finish within 60 minutes.
  • After approx. 2-3 hours the subfloor is ready for finishing with ceramic tiles. When using natural stone keep a drying time of at least 24 hours.
  • Allow to dry for at least 48 hours before applying paint, wallpaper, spackle and decorative plaster.




Quality and guarantee

Environment and health

Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155.
MSDS : For extensive information about safety and environment we refer to our website www.eurocol.nl.


Articles

ArticleDefinitionPackagingEAN-code
957Wandoquick 20 kg bag8 710345 957021