Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

eurocol
608 EUROSTAR RENO

608

Very low emission carpet adhesive with a high initial grab.

608-eurostar-reno.jpg
  • 608-ec 1 plus licence uk.pdf

    608-ec 1 plus licence uk.pdf

  • specification-uk.pdf

    specification-uk.pdf

  • 608-safety data sheet uk.pdf

    608-safety data sheet uk.pdf

Product Typification

Very low emission carpet adhesive with a high initial grab.
Basis : Superior acrylic dispersion.
Colour : Beige.
Consistency : Thick liquid.

Product advantages:
  • Very low emission  
  • Emicode EC 1PLUS
  • Easy and safe to apply
  • Non-flammable
  • High initial adhesion strength
  • Favourable spreading capacity
  • Fast bonding
  • Roller-castor-chair resistant 

Performances

Consumption : 300 - 500 g/m², depending on the back quality and the subfloor.
Flammability : Non-flammable.
Specific weight : 1.53 kg/l.

Application

Application:

For installing carpet (with a back of natural jute or synthetic fabric) and needlefelt on impervious subfloors:

  • old and water-resistant adhesive residues
  • epoxy floors
  • coated floors
  • power-floated floors
  • old solid floor covering. 

Working Process

Storage : Store cool and free from frost.
Tools : Eurocol spreader no. 850/B1. In case of strong structured back qualities and/or adhesive residues use a large size spreader (spreader B2 or B3).
Open time : 10-30 minutes.*
Latency : None.
Drying time : 24 hours.*
Shelf Life : 12 months, in unopened packaging.
Frost-proof : No.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
300 - 500 g/m², depending on the back quality and the subfloor.

Substrate:
  • 608 Eurostar Reno is suitable for any type of subfloor and on old, sandpapered adhesive residuesthat has a good tensile and compression strength. The subfloor should also be even, clean, permanently dry and free from grease and dirt, according to the requirements of BS 8203 or DIN 18 365.
  • Only use pervious floor coverings on impervious subfloors.
  • When installing fillerfree carpet and polyolefin backed carpet on impervious subfloors apply a 2 mm levelling compound layer.
  • In advance always seek our technical data sheets. In doubt about the application ask for technical advice.


User manual:
  • Old adhesive residues should be water-resistant and sandpapered beforehand.
  • Thereafter make the subfloor dust-free with an industrial vacuum cleaner.
  • Apply the adhesive with a regular notched adhesive spreader (Eurocol spreader no. 850/B1). In case of strong structured back qualities and/or adhesive residues use a large size spreader (spreader B2 or B3).
  • On absorbent subfloors apply the floor covering directly into the wet adhesive. On low absorbent subfloors keep a waiting time of 10 - 30 minutes (depending on porosity subfloor, temperature and relative humidity).
  • Roll the floor covering carefully. Sheet-ends and longitudinal joints are to be pressed firmly.
  • On low absorbent subfloors, in case of impervious back qualities and/or when circumstances are less ideal, rolling and pressing should be repeated after approx. 15 minutes (depending on temperature and relative humidity).
  • Remove fresh adhesive spots immediately with water.

Working conditions:
Required surrounding temperature : 18 - 23 °C.
Temperature for material and subfloor : min. 15° - max. 20 ºC.
Relative humidity : 40 - 80%.

Underfloor heating systems:
608 Eurostar Reno can be applied on underfloor heating systems. The startprotocol of the floorheating needs to be completly executed in accordance with the directives of the supplier. Turn off the heater 24 hours before application. Do not heat again until at least 24 hours after installation, in steps of maximum 5 °C water temperature per day.

Contains methylchloroisothiazolinone and methylisothiazolinone (3:1) and benzisothiazolinone . May produce an allergic reaction.





Quality and guarantee

Environment and health

Hazard Class : None.
Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155.
MSDS : Available on request.


Articles

ArticleDefinitionPackagingEAN-code
608Eurostar Reno14 kg Bucket 8 710345 608107