Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2



Linoleum adhesive with a high initial grab.

  • specification-uk.pdf


  • 514-safety data sheet uk.pdf

    514-safety data sheet uk.pdf

Product Typification

Linoleum adhesive with a high initial grab.
Basis : Synthetic resin dispersion.
Colour : Beige.
Consistency : Thick liquid.

Product advantages:
  • Non-flammable
  • Good moisture resistance
  • High initial adhesion strength
  • Favourable spreading capacity
  • Roller-castor-chair resistant 


Consumption : 400 - 450 g/m².
Flammability : Non-flammable.
Frost resistance : No.
Specific weight : 1.45 kg/l.



For installing:

  • linoleum in sheets and tiles
  • linoleum in decorative designs and mosaic
  • corkment
  • colovinyl. 

Working Process

Storage : Store cool and free from frost.
Tools : Eurocol spreader no. 850/B1 (when installing colovinyl use adhesive spreader no. 852/A2).
Open time : 15-20 minutes.*
Latency : None.
Drying time : Approx. 24 hours.*
Shelf Life : 12 months, in unopened packaging.
Frost-proof : No.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

400 - 450 g/m².


  • 514 Eurosafe Lino Plus is suitable for any type of subfloor that has a good tensile and compression strength. The subfloor should also be even, clean, permanently dry and free from grease and dirt, according to the requirements of BS 8203 or DIN 18 365.
  • When installing on impervious subfloors apply a 2 mm levelling compound layer.
  • In advance always seek our technical data sheets. In doubt about the application ask for technical advice.

User manual:
  • Apply the adhesive with a regular notched adhesive spreader (Eurocol spreader no. 850/B1) (when installing Colovinyl use adhesive spreader no. 852/A2).
  • On absorbent subfloors apply the floor covering directly into the wet adhesive. On low absorbent subfloors keep a waiting time of approx. 10 minutes.
  • Roll the floor covering carefully; first widthwise, then lengthwise.
  • Do not double-stick bight marks. Lay bight marks into the wet adhesive as usual.
  • Sheet-ends, bight marks and longitudinal joints are to be pressed firmly.
  • On low absorbent subfloors and/or when circumstances are less ideal, rolling and pressing should be repeated after approx. 15 minutes.
  • Remove fresh adhesive spots immediately with water.

Working conditions:
Required surrounding temperature : 18 - 23 °C.
Temperature for material and subfloor : min. 15° - max. 20 ºC.
Relative humidity : 40 - 80%.

Underfloor heating systems:
514 Eurosafe Lino Plus can be applied on underfloor heating systems. The startprotocol of the floorheating needs to be completly executed in accordance with the directives of the supplier. Turn off the heater 24 Underfloor heating systems:hours before application. Do not heat again until at least 24 hours after installation, in steps of maximum 5 °C water temperature per day.

Contains methylchloroisothiazolinone and  methylisothiazolinone (3:1) and benzisothiazolinone. May produce an allergic reaction.

Environment and health

Hazard Class : None.
Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155.
MSDS : Available on request.


514Eurosafe Lino Plus14 kg Bucket 8 710345 514101