SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

eurocol
225 EUROSOL PU CONTACT

225

Contact adhesive, PUR base - transparent - discolouration-free, very high immediate contact bonding power, contains solvents.

225%20contact%20pu_low%20res2.jpg
  • safety data sheet_eurocol_eurosol_225_contact_pu_uk.pdf

    safety data sheet_eurocol_eurosol_225_contact_pu_uk.pdf

  • pdf-product-specification.pdf

    pdf-product-specification.pdf

Product Typification

TODO
Basis : Polyuretha in solvent.
Colour : Translucent.
Consistency : Thick liquid.

Product advantages:
  • Solvent-containing PUR-based, thermally reactivable contact adhesive with very high initial contact bonding power for temperature resistant contact adhesion of a great variety of materials such as metal, glass, ceramics, plastics (ABS, vinyl, acrylic) wood, leather, hardboard, rubber etc.
  • In floor covering installation: it can be used for wooden skirting boards, rubber or vinyl stair nosings, grooving profiles, floor covering.
  • Also used for installation of homogenous vinyl, rubber, leather and cork floor coverings, linoleum according to floor covering manufacturer‘s instructions.
  • GISCODE S 1. Please check Safety Data Sheet!

Performances

Consumption : 100 - 150 g/m², when fixed two-sided.
Curing : Approx. 24 hours.*
Flammability : Contains a highly flammable solvent.
Special quality : Adhesive is discolouration-free and is characterised by very high plasticizer resistance.

Application

Application:

can be used for the installation of

  • wooden skirting boards
  • rubber or vinyl stair nosings
  • grooving profiles
  • floor covering

from the following materials

  • vinyl
  • rubber
  • leather
  • linoleum

Working Process

Tools : Adhesive spreader A4 or brush.
Open time : Approx. 15 minutes contact bonding time.
Waiting time : 5 minutes. *
Application temperature : Recommended 3 grd above dew point temperature.
Curing : Approx. 24 hours.*
Storage : Store dry and free from frost. (5 - 30°C). Protect against high temperatures.
Shelf Life : Approx 12 months, in unopened packaging. After use close the open packaging well.
Drying : 24 hours.*
Cleaner : Acetone.
Remarks : Adhesive contains highly volatile, flammable solvents. In combination with air, the adhesive could turn into an explosive mixture which could lead to a high concentration especially at the lowest point of the room! Please pay attention to the safety data sheet.
We refer to the regulation on hazardous substances §16. Please check the possibility of using solvent-free products for your installation work, e.g. Eurocol 650 Eurostar Fastcol.
Relevant norms and regulations of the regions are to be respected. Outside Germany relevant national regulations are to be applied, which have to be known by the user.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
100 - 150 g/m², when fixed two-sided.

Substrate:
  • The substrate must be pressure- and tension-resistant, permanently dry, free of cracks and dust, even and free of layers that reduce adhesion.
  • Adhesion-reducing layers, old material residues must be removed by suitable mechanical measures. 
  • In case of defects, objections are to be reported in writing.




User manual:
  • Before use, temper the product according to the processing conditions.
  • Stir well before use!
  • Apply a thin layer of adhesive on the subfloor and backing of the material to be fixed with a brush or a fine-notched adhesive trowel.
  • The airing time and contact bonding time depend on the quality of the subfloor, the amount of applied adhesive, the room temperature and the air humidity in the room. Avoid puddles which prolong the drying time significantly. After having installed the floor covering, rub it down well, especially along the seams. Correction is not possible after installation.
  • Spilt adhesive is to be removed immediately and carefully with acetone (solvents).
  • Reactivating the adhesive film is possible by heating the film up to approx. 70 °C. Doing it this way, profiles or tiles can be treated with adhesive already some hours before the installation. Heating the film is especially recommended for getting a perfectly clean bonding at the edges and along the seams.
  • Insure sufficient ventilation!

Processing conditions: 

at least 15 °C floor temperature,
at least 18°C material and room temperature,
35-75% relative humidity, recommended <65%.





Environment and health

GISCODE : S1
LEED : VOC 668,8 g/l
DGNB : VOC 76 %
Hazard Class : Contains hazardous ingredients. Please observe the notes in the Safety data sheet!
Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Bound material residues can be disposed of as household waste.
MSDS : Available on request.


Articles

articleproductnamepackagingshipping unit
225Eurosol PU Contact5 kg tin bucket75/pallet