Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

eurocol
036 SUPERCONTACT

036

Universal bonding-cement-slurry.

036-supercontact.jpg
  • specification-uk.pdf

    specification-uk.pdf

  • dop-declaration-uk.pdf

    dop-declaration-uk.pdf

  • 036-safety data sheet uk.pdf

    036-safety data sheet uk.pdf

Product Typification

Universal bonding-cement-slurry.
Basis : Cement-based powder with additives and a high synthetic binder content, to be mixed with water.
Colour : Grey.
Consistency : Powder.

Product advantages:
  • User friendly 
  • Multi-purpose application 
  • For in- and outdoor use 
  • Low chromate 

Performances

Aging : 036 Supercontact does not deteriorate with age.
Classification : C2E according to NEN EN 12004. An improved cement-based tile adhesive with an extended open time.
Consumption : 

See directions for use.

Specific weight : 1.6 kg/l.

Application

Application:
  • Bonding-cement-slurry for applying and fixing (large) floor tiles for extra bonding and a full contact between tile and screed. 
  • Adhesive for fixing (large) floor tiles on fresh cement screeds. 
  • Adhesion improving additive for mortars on critical subfloors e.g.:
    - smooth and impervious subfloors;
    - subfloors with a high moisture-absorption capacity. 

Working Process

Storage : Store cool and dry.
Mixing ratio : See directions for use.
Shelf Life : 12 Months, in unopened packaging. After use close the open packaging well.
Application temperature : From 5° to 25 °C (temperature of the surrounding as well as the subfloor).

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:

See directions for use.



Substrate:
  • The subfloor of the screed should be clean, free from grease and dust, dry and have a good tensile and compression strength, according to the requirements of DIN 18 352. 
  • For a good compaction of the mortar bed, adhere the mortar to the subfloor.
  • In advance always seek our technical data sheets. In doubt about the application ask for technical advice. 


User manual:

As a bonding-cement-slurry for applying and fixing (large) floor tiles:

  • Add 25 kg of 036 Supercontact to 4.5 - 5 litres of cool and clean tap water and stir the mortar for 1 minute, by using an electric stirrer (approx. 600 rpm), to a smooth and homogenous mixture. 
  • Pour out the mortar on the screed and divide it with a notched adhesive spreader. 
  • Press the tiles within 15 minutes with a shuffling movement into the adhesive. Do not tap on the tiles with a hammer. 
  • Expenditure: 1.75 - 4 kg/m².

As a adhesion improving additive for mortars on critical subfloors:

  • Add 25 kg of 036 Supercontact to 8.5 - 9 litres of cool and clean tap water and stir the mortar for 1 minute, by using an electric stirrer (approx. 600 rpm), to a smooth and homogeneous mixture. 
  • Apply the mixture on the subfloor with a brush or broom. 
  • On non-absorbent subfloors let the mortar dry. In case of absorbent subfloors or floor work apply the sand/cement mortar wet in wet.
  • Expenditure: 0.5 - 1 kg/m². 

Spreading capacity/notched spreader for powder tile adhesives:

The smoothness of the subfloor and type of tile are determining for the adhesive spreader to be used. Selection of the notched spreader should be made in such way that a minimum adhesive contact of 80% is guaranteed (equally divided over the back of the tile). For outdoor purposes this contact must be 100%. Also counts for heavy-duty indoor floors e.g. store and warehouse floors. Check the adhesive contact regularly.

Spreader no. 19, 4x4 mm    : Spreading capacity approx. 1.75 kg/m²
Spreader no. 12, 6x6 mm    : Spreading capacity approx. 2.5 kg/m²
Spreader no. 13, 8x8 mm    : Spreading capacity approx. 3.5 kg/m²
Spreader no. 14, 10x10 mm : Spreading capacity approx. 4 kg/m²




Quality and guarantee

Environment and health

Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155.


DUBO:


Articles

ArticleDefinitionPackagingEAN-code
036Supercontact 25 kg Bag8 710345 036047